How many hours to challenge the Red Seal exam, by trade
Hours of experience each province requires before you can challenge the Red Seal exam, trade by trade, from the federal Ellis Chart, with each province’s rule.
References checked . Confirm application and exam requirements with the responsible authority.
How the hours rules work
Outside Quebec, every province and territory lets an experienced worker challenge the Red Seal exam once it has verified enough hands-on experience in the trade, though not in every trade: the chart shows no trade qualifier option for some trades in some places. How much experience is enough depends on where you apply. Saskatchewan, Manitoba, New Brunswick, Nova Scotia, Prince Edward Island, Newfoundland and Labrador and Yukon generally ask for 1.5 times the apprenticeship term, so a four-year, 7,200-hour trade needs 10,800 hours. The chart shows exceptions, such as 8,000 or 10,000 hours for many Prince Edward Island trades and twice the term for Automotive Refinishing Technician in Manitoba. Ontario asks for hours equal to the trade’s training time. Alberta sets months and hours for each trade on its trade profile. British Columbia prints the hours and the share of the trade’s tasks on each trade’s declaration form. The Northwest Territories and Nunavut generally add 1,800 hours to the apprenticeship term.
Quebec has no reduced-hours challenge. You earn a Quebec certificate first, then enrol in its Red Seal Program. For construction trades, the Commission de la construction du Québec checks your eligibility for its provincial exam once your paid hours in the trade’s recognized tasks equal 100% of the apprenticeship, with no apprentice certificate needed. For regulated trades outside construction, the ministry can recognize your experience to shorten the apprenticeship, waive training or issue the certificate.
The figures below are the hours each authority reports to the federal Ellis Chart, which Employment and Social Development Canada publishes with the Canadian Council of Directors of Apprenticeship, read 29 October 2026. The chart gives the general requirement for each trade; the authority’s own form, trade profile or regulation sets the final rule and may add a minimum in particular tasks, a scope percentage or a practical assessment. Confirm the figure on the authority’s page, linked from each province’s guide, before you count on it.
- Ellis Chart: search and compare every trade by province and territory
- Ellis Chart home: published by Employment and Social Development Canada with the CCDA
- CCQ: recognition of training and work experience (exam at 100% of the apprenticeship hours)
- Québec: electricity certificate, recognition of work experience (French)
- Québec: the Red Seal Program
- Can you get a Red Seal without an apprenticeship?
Hours to challenge the Red Seal exam, by trade
The first hours column covers the seven jurisdictions whose general rule is 1.5 times the apprenticeship term; where one of them differs, it is named in brackets. “No challenge route” means the chart shows no trade qualifier option for that trade there; “Not shown” means the chart leaves the cell blank; “a certificate, not hours” means the authority asks for a certificate or licence instead of an hours total (Nova Scotia’s hairstylist and crane trades). Each trade links to its own page on this site, which shows all thirteen jurisdictions for that trade.
| Trade | SK, MB, NB, NS, PE, NL, YT | Ontario | Alberta | British Columbia | NT and NU |
|---|---|---|---|---|---|
| Agricultural Equipment Technician | 10,800 (YT no challenge route) | 7,000 | 9,360 | 8,790 | No challenge route (NU not shown) |
| Appliance Service Technician | 8,100 (MB, YT not shown; PE 10,000; SK no challenge route) | 6,000 | 7,200 | 10,800 | 7,200 |
| Auto Body and Collision Technician | 10,800 | 8,000 | 9,630 | 9,675 | 9,000 |
| Automotive Refinishing Technician | 5,400 (MB 7,200; PE 10,000) | 4,800 | 4,860 | 4,950 | 5,400 (NU no challenge route) |
| Automotive Service Technician | 10,800 | 7,220 | 9,360 | 9,540 | 9,000 |
| Baker | 8,100 (NB 7,200; PE 8,000; SK no challenge route) | 7,000 | 7,020 | 7,560 | 7,200 |
| Boilermaker | 8,100 (YT not shown) | 6,600 | 7,020 | 7,425 | No challenge route |
| Bricklayer | 8,100 (SK 9,000) | 5,600 | 7,200 | 7,290 | No challenge route |
| Cabinetmaker | 10,800 (SK, MB 9,600) | 8,000 | 8,160 | 9,720 | 9,000 |
| Carpenter | 10,800 (YT 9,600) | 7,200 | 9,360 | 9,540 | 9,000 |
| Concrete Finisher | 5,400 (PE 8,000; SK no challenge route; YT not shown) | 4,980 | 5,400 | 4,860 | No challenge route |
| Construction Craft Worker | 5,400 (SK 3,600; PE 6,000; YT not shown) | 2,880 | 2,000 | 6,000 | No challenge route |
| Construction Electrician | 10,800 | 9,000 | 9,180 | 9,000 | 9,000 |
| Cook | 8,100 | 6,000 | 7,020 | 5,000 | 7,200 |
| Drywall Finisher and Plasterer | 8,100 (SK, NB no challenge route; MB, YT not shown; PE 6,000) | 5,400 | No challenge route | 7,560 | No challenge route |
| Floorcovering Installer | 8,100 (MB 6,300; NB 5,400; PE 8,000; YT 7,200; SK no challenge route) | 6,000 | 4,500 | 7,425 | 5,400 |
| Gasfitter - Class A | 8,100 (MB, NB 10,800; PE 6,000; SK no challenge route) | Not shown | 7,020 | 4,500 | 7,200 |
| Gasfitter - Class B | 5,400 (PE 6,000; SK no challenge route) | Not shown | 4,680 | 4,500 | 5,400 |
| Glazier | 10,800 (NB 7,200; PE 10,000) | 8,000 | 9,720 | 9,990 | 9,000 |
| Hairstylist | 5,400 (PE 8,100; NB not shown; NS a certificate, not hours) | 3,500 | 4,350 | 4,725 | 5,400 |
| Heavy Duty Equipment Technician | 10,800 (YT 8,100) | 7,000 | 6,750 | 9,495 | 9,000 (NU 7,200) |
| Heavy Equipment Operator (Dozer) | Not shown (NB 3,600; NS 5,400; PE 8,000; NL 7,200; SK no challenge route) | 2,500 | No challenge route | No challenge route | 3,600 (NT no challenge route) |
| Heavy Equipment Operator (Excavator) | Not shown (NB 3,600; NS 5,400; PE 8,000; NL 7,200; SK no challenge route) | 2,500 | No challenge route | No challenge route | 3,600 (NT no challenge route) |
| Heavy Equipment Operator (Tractor-Loader-Backhoe) | Not shown (NB 3,600; NS 5,400; PE 8,000; NL 7,200; SK no challenge route) | 2,500 | No challenge route | No challenge route | 3,600 (NT no challenge route) |
| Industrial Electrician | 10,800 (SK no challenge route) | 9,000 | 9,180 | 9,000 | 9,000 (NU no challenge route) |
| Industrial Mechanic (Millwright) | 10,800 (MB 9,600) | 8,000 | 9,360 | 9,540 | 9,000 |
| Instrumentation and Control Technician | 10,800 (SK 10,200; MB 9,600) | 8,000 | 9,180 | 9,000 | 9,000 |
| Insulator (Heat and Frost) | 10,800 (PE 10,000; YT 8,100) | 6,400 | 9,720 | 9,990 | 7,200 |
| Ironworker (Generalist) | 8,100 (SK no challenge route; YT not shown) | 8,000 | No challenge route | 7,110 | No challenge route |
| Ironworker (Reinforcing) | 5,400 (MB, YT not shown; PE 6,000) | 4,000 | 4,860 | 4,770 | No challenge route |
| Ironworker (Structural/Ornamental) | 8,100 (MB, YT not shown; NB 5,400; PE 7,400; NL 7,200) | 6,000 | 7,290 | No challenge route | No challenge route |
| Landscape Horticulturist | 9,000 (PE 8,100; YT not shown) | 6,120 | 7,560 | 7,920 | No challenge route |
| Lather (Interior Systems Mechanic) | 8,100 (SK 9,000; PE 8,000) | 5,400 | 7,020 | 9,000 | No challenge route |
| Machinist | 10,800 | 8,000 | 9,360 | 9,495 | 9,000 |
| Metal Fabricator (Fitter) | 8,100 (MB 10,800; PE 7,400; YT not shown) | 5,400 | 7,020 | 7,200 | No challenge route |
| Mobile Crane Operator | 8,100 (NS a certificate, not hours; NL no challenge route; YT not shown) | 6,000 | 7,560 | 5,400 | 7,200 |
| Motorcycle Technician | Not shown (NB 7,200; NS 8,100; PE 8,000; NL 9,600; SK no challenge route) | 6,000 | 8,340 | 8,700 | Not shown |
| Oil Heat System Technician | 8,100 (SK no challenge route; MB not shown) | Not shown | No challenge route | 9,600 | 7,200 |
| Painter and Decorator | 8,100 (PE 8,000; YT 7,200) | 6,000 | 5,850 | 7,290 | 7,200 |
| Parts Technician | 8,100 (NB 7,200; PE 8,000) | 6,000 | 6,750 | 7,695 | 7,200 |
| Plumber | 10,800 (YT 9,600) | 9,000 | 9,360 | 9,450 | 9,000 |
| Powerline Technician | 10,800 | 8,000 | 9,563 | 10,080 | 9,000 |
| Recreation Vehicle Service Technician | 7,200 (NS, NL, YT 8,100; PE 10,000) | 7,000 | 7,200 | 7,020 | No challenge route |
| Refrigeration and Air Conditioning Mechanic | 10,800 | 9,000 | 9,360 | 9,315 | 9,000 |
| Roofer | 8,100 (SK 6,750; PE 8,000) | 4,000 | 8,790 | 7,425 | 9,000 |
| Sheet Metal Worker | 10,800 (YT 8,100) | 9,000 | 9,000 | 9,360 | 9,000 |
| Sprinkler Fitter | 10,800 | 7,200 | 9,900 | 9,720 | 9,000 |
| Steamfitter/Pipefitter | 10,800 (YT 9,600) | 9,000 | 9,360 | 9,450 | 9,000 |
| Tilesetter | 8,100 (MB, YT not shown; SK 10,800; NB 9,000; PE 8,000) | 5,600 | Not shown | 6,750 | Not shown |
| Tool and Die Maker | 10,800 (NB 7,200; PE 10,000; SK no challenge route; YT not shown) | 8,000 | No challenge route | 2,700 | No challenge route |
| Tower Crane Operator | 4,500 (NB 3,600; PE 10,000; NS a certificate, not hours; NL no challenge route; YT not shown) | 3,000 | 4,230 | 3,000 | No challenge route |
| Transport Trailer Technician | 5,400 (MB, NB 8,100; PE 8,000; SK no challenge route) | 4,480 | 4,950 | 4,725 | 5,400 |
| Truck and Transport Mechanic | 10,800 (YT 8,100) | 6,720 | 6,750 | 9,495 | 7,200 |
| Welder | 8,100 | 6,000 | 7,020 | 6,930 | 7,200 |
Where an authority’s own page differs from the chart
The chart can lag the authorities’ own pages. These are the cells where the authority’s own page gives a different figure. The authority’s figure governs; each province’s guide links to the page it came from.
- Automotive Service Technician, Alberta: the authority’s own page gives 9,180; the chart shows 9,360.
- Heavy Equipment Operator (Dozer), Prince Edward Island: the authority’s own page says it is not a designated trade there; the chart shows 8,000.
- Heavy Equipment Operator (Excavator), Prince Edward Island: the authority’s own page says it is not a designated trade there; the chart shows 8,000.
- Heavy Equipment Operator (Tractor-Loader-Backhoe), Prince Edward Island: the authority’s own page says it is not a designated trade there; the chart shows 8,000.
- Ironworker (Structural/Ornamental), Prince Edward Island: the authority’s own page gives 6,000; the chart shows 7,400.
- Metal Fabricator (Fitter), Prince Edward Island: the authority’s own page gives 10,800; the chart shows 7,400.
- Roofer, Prince Edward Island: the authority’s own page gives 8,100; the chart shows 8,000.
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Saskatchewan
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Ontario
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Northwest Territories
- Challenge the Red Seal exam in Nunavut
Each province’s rule in one line
How each authority arrives at its figure, as it publishes the rule. Open the province’s guide for the hours trade by trade, the forms and the fees.
- British Columbia: Set per trade on the Employer Declaration form, with 70% of the job tasks (9,000 hours for Construction Electrician)
- Alberta: Months and hours per trade profile, on full-time work (72 months and 9,180 hours for Electrician)
- Saskatchewan: 1.5 × the apprenticeship in years and hours, on a Form 6A per employer (6 years and 10,800 hours for a 4-year, 7,200-hour trade)
- Manitoba: Years and hours per trade profile, with 70% of the trade’s scope (6 years and 10,800 hours for electrician)
- Ontario: Hours equal to the trade’s training time, at about 1,800 a year of hands-on work (9,000 for electrician)
- Quebec: No reduced-hours route: the CCQ provincial exam needs experience equal to the whole apprenticeship (8,000 for electrician or plumber, from 4 periods of 2,000)
- New Brunswick: Set per trade in Board Order GA001: 10,800 for a 7,200-hour apprenticeship, 8,100 for 5,400
- Nova Scotia: 1.5 × the apprenticeship term, hands-on, with some of it in the last ten years (10,800 for a 7,200-hour trade); a trade’s own regulations can set the figure instead
- Prince Edward Island: Published per trade: 1.5 × the PEI apprenticeship term, within the last ten years (10,800 for a 7,200-hour trade)
- Newfoundland and Labrador: 1.5 × the apprenticeship’s on-the-job hours, within the last ten years (10,800 for a 7,200-hour trade)
- Yukon: 1.5 × the Yukon apprenticeship hours (9,600 for Plumber, for example)
- Northwest Territories: Apprenticeship term plus one 1,800-hour period (9,000 for a four-period trade)
- Nunavut: Apprenticeship term plus 1,800 hours (9,000 for a four-level trade)
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Saskatchewan
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Ontario
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Northwest Territories
- Challenge the Red Seal exam in Nunavut
What counts as hours
Authorities count hands-on work in the trade, verified by an employer or, for the self-employed, by a statutory declaration with references or business records. Ontario, for example, counts time spent practising the trade, not time as a supervisor or manager or time in school. Several authorities also want the experience spread across the scope of the trade, not concentrated in one task. Manitoba asks for experience in at least 70% of the trade’s scope, and British Columbia prints the minimum share of the listed tasks on each trade’s declaration form: 70% for Construction Electrician. Manitoba does not count time spent as a registered apprentice toward its Trades Qualification hours.
Experience gained outside Canada can count once the employer can be reached and the documents are in the language the authority asks for. British Columbia wants every document in English, Alberta wants documents translated into English by a member of a recognized translator association, and Ontario wants verifications translated into English or French by a member of a recognized Canadian association of translators. Verification takes longer for experience abroad: about 10 to 12 weeks in Alberta, against 4 to 6 weeks for Canadian experience. Each province’s guide says what its authority publishes about foreign experience, residency and applying before you arrive.
- Skilled Trades Ontario: Trade Qualifier Application Guide (PDF)
- Apprenticeship Manitoba: apply to become a trade qualifier (70% of scope, residency)
- SkilledTradesBC: Construction Electrician employer declaration, 9,000 hours and 70% of tasks (PDF)
- SkilledTradesBC: challenge a certification exam (documents in English)
- Alberta Tradesecrets: program details (English translations, verification times)
- SATCC: Trade Qualifier application FAQs (Saskatchewan address before the exam)
- Step-by-step by province and territory
- How to get Red Seal certified in Canada
Prepare for the exam
Once your hours are approved you write the same Red Seal exam as a completing apprentice: multiple choice, 100 to 150 questions depending on the trade, four hours, 70% to pass. It is built from the trade’s Red Seal Occupational Standard and its published exam breakdown, so study from the standard and practise under time.
Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.
Common questions
How many hours do you need to challenge the Red Seal exam?
It depends on the province and the trade. Seven jurisdictions (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, Prince Edward Island, Newfoundland and Labrador and Yukon) generally ask for 1.5 times the apprenticeship term, which is 10,800 hours for a four-year trade such as electrician or plumber and 8,100 for a three-year trade such as welder or cook. Ontario asks for hours equal to the training time, 9,000 for an electrician. Alberta and British Columbia set hours trade by trade, and the Northwest Territories and Nunavut generally add 1,800 hours to the apprenticeship term. In Quebec the CCQ wants hours equal to 100% of the apprenticeship before its provincial exam. The table on this page lists every trade.
How many hours do I need to challenge the Carpenter Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (YT 9,600) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 7,200; Alberta 9,360; British Columbia 9,540; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Carpenter form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Construction Electrician Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 9,000; Alberta 9,180; British Columbia 9,000; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Construction Electrician form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Welder Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 8,100 hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 6,000; Alberta 7,020; British Columbia 6,930; the Northwest Territories 7,200 and Nunavut 7,200. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Welder form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Cook Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 8,100 hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 6,000; Alberta 7,020; British Columbia 5,000; the Northwest Territories 7,200 and Nunavut 7,200. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Cook form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Industrial Mechanic (Millwright) Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (MB 9,600) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 8,000; Alberta 9,360; British Columbia 9,540; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Industrial Mechanic (Millwright) form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Plumber Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (YT 9,600) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 9,000; Alberta 9,360; British Columbia 9,450; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Plumber form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Heavy Duty Equipment Technician Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (YT 8,100) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 7,000; Alberta 6,750; British Columbia 9,495; the Northwest Territories 9,000 and Nunavut 7,200. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Heavy Duty Equipment Technician form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Automotive Service Technician Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 7,220; Alberta 9,360; British Columbia 9,540; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Automotive Service Technician form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Parts Technician Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 8,100 (NB 7,200; PE 8,000) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 6,000; Alberta 6,750; British Columbia 7,695; the Northwest Territories 7,200 and Nunavut 7,200. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Parts Technician form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Hairstylist Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 5,400 (PE 8,100; NB not shown; NS a certificate, not hours) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 3,500; Alberta 4,350; British Columbia 4,725; the Northwest Territories 5,400 and Nunavut 5,400. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Hairstylist form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Steamfitter/Pipefitter Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (YT 9,600) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 9,000; Alberta 9,360; British Columbia 9,450; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Steamfitter/Pipefitter form or trade profile sets the final rule, so confirm there before you apply.
How many hours do I need to challenge the Sheet Metal Worker Red Seal exam?
The Ellis Chart (read 2026-10-29) shows 10,800 (YT 8,100) hours in the seven jurisdictions whose general rule is 1.5 times the apprenticeship term (Saskatchewan, Manitoba, New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador and Yukon); Ontario 9,000; Alberta 9,000; British Columbia 9,360; the Northwest Territories 9,000 and Nunavut 9,000. Quebec has no reduced-hours challenge; experienced workers earn a Quebec certificate first, then enrol in its Red Seal Program. The authority’s own Sheet Metal Worker form or trade profile sets the final rule, so confirm there before you apply.
Do the hours have to be in Canada?
No. Most authorities accept documented experience gained outside Canada, verified with the employer, and some let you apply before you arrive. Processing takes longer for foreign experience, and the documents must be in the language the authority asks for: English in British Columbia and Alberta. New Brunswick expects residency or a job offer first, Manitoba requires you to live in Manitoba to challenge an exam, and Saskatchewan lets you apply from any country but wants you in Saskatchewan with a Saskatchewan mailing address before you write. Each province’s guide gives its authority’s published rule.
Is the figure on the Ellis Chart the final rule?
No. The chart reports the general requirement each authority publishes. The authority’s own trade form, profile or regulation governs, and it may add a minimum number of hours in particular tasks, a share of the trade’s scope, a practical assessment or a prerequisite credential. Use the chart to compare provinces, then confirm on the authority’s page before you apply.
What if I have the hours but not the whole scope of the trade?
Several authorities look at scope as well as hours. Manitoba asks for experience in at least 70% of the trade’s scope, British Columbia prints the minimum share of tasks on each trade’s declaration form (70% for Construction Electrician), and Ontario, Nova Scotia and others compare your record with the trade’s standard. Ask the authority before applying.