How to challenge the Red Seal exam in Ontario: Trade Qualifier
How Ontario’s Trade Equivalency Assessment works: hours by trade, the $235 assessment and $150 exam, 24 exam centres, rewrites and the compulsory trades.
- Who decides
- Skilled Trades Ontario
- What the route is called
- Trade Equivalency Assessment (TEA); applicants are Trade Qualifiers
- Experience required
- Hours equal to the trade’s training time, at about 1,800 a year of hands-on work (9,000 for electrician)
- Application fee
- $235 plus HST assessment; exam $150 plus HST
- Time to a decision
- Not published
- Exam attempts
- Rewrite after 30 days at $150 plus HST each time; no attempt limit published
- The exam
- The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.
References checked . Confirm application and exam requirements with the responsible authority.
Who can challenge the Red Seal exam in Ontario
Skilled Trades Ontario’s Trade Equivalency Assessment is for experienced tradespeople who have not completed an Ontario apprenticeship but have equivalent qualifications or experience and want an Ontario Certificate of Qualification; it exists only in trades with a certifying exam. You must show competency in the trade’s Training Standard and experience at least equal to the trade’s required training time, counted at about 1,800 hours a year of full-time, hands-on work rather than supervising, managing or school. Appendix A of the application guide prints the hours: 9,000 for Electrician – Construction and Maintenance, Industrial Electrician, Plumber, Steamfitter, Sheet Metal Worker and Refrigeration and Air Conditioning Systems Mechanic; 8,000 for Industrial Mechanic Millwright, General Machinist, Cabinetmaker, Architectural Glass and Metal Technician, Instrumentation and Control Technician, Powerline Technician and Auto Body and Collision Damage Repairer; 7,220 for Automotive Service Technician; 7,200 for General Carpenter and Sprinkler and Fire Protection Installer; 7,000 for Heavy Duty Equipment Technician, Agricultural Equipment Technician and Baker-Pâtissier; 6,720 for Truck and Coach Technician; 6,000 for Welder, Cook, Parts Technician and Appliance Service Technician; 3,500 for Hairstylist.
Experience gained outside Canada, in another province or in the Canadian Forces is explicitly accepted. No residency or work-authorization requirement is stated, an international passport or Canadian immigration documents are acceptable identification, and Skilled Trades Ontario does not say whether you may apply while outside Canada; the exam is written in person in Ontario, in English or French only. Verifications in another language must be translated by a member of a recognized Canadian association of translators. Trade-specific extras: electricians must show Canadian Electrical Code knowledge or complete a code course of at least 12 hours, welders must first pass a six-project practical assessment (four welding processes plus oxy-fuel cutting) at one of 14 Ontario test centres, cooks and bakers need a Food Handler certificate from the past three years, and crane operators file a Declaration of Experience and pass a three-part skills test.
Hours required by trade in Ontario
These are the experience figures Skilled Trades Ontario publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.
Unless a trade’s note says otherwise:
- Published in Appendix A of the Trade Qualifier Application Guide
Documents and forms you need
Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Skilled Trades Ontario uses.
- The Trade Qualifier Application Form: your details, the trade name and code, where the experience was gained, up to three references, the declaration and consent, and the $235 plus HST fee ($265.55); one fee per trade. Pay by credit card online in the STO Portal or by phone once the application is confirmed complete, or by certified cheque or money order by mail.
- A Work Experience Verification Form, or a detailed letter, from each reference: a former employer, manager or supervisor with trade knowledge, preferably a certified journeyperson, giving the business details, your start and end dates, total months and hours, and a detailed description of your tasks. It is signed as a legal attestation, and Skilled Trades Ontario contacts each reference.
- For self-employment, verifications from other trades businesses that used your services, a detailed résumé with the months and hours of each job, and proof the business exists, such as a business number, contracts or invoices.
- A legible copy of valid government photo identification showing your legal name, date of birth, photo and signature: a Canadian or international passport, citizenship card, Secure Certificate of Indian Status, a provincial driver’s licence or ID card, or Canadian immigration documents. Translations of any document by a member of a recognized Canadian association of translators.
- Trade-specific items: Canadian Electrical Code evidence or a course certificate for electricians, the welder practical assessment certificate (six projects: four welding processes plus oxy-fuel cutting, at one of 14 Ontario test centres), a Food Handler certificate for cooks and bakers, the Hoisting Engineer Declaration of Experience for crane operators, and a Member’s Personnel Record Resume for Canadian Forces applicants.
- After approval, the exam fee in the STO Portal and, if needed, the Exam Accommodation Request Form with a health professional’s documentation sent to accommodations@skilledtradesontario.ca before booking. If an assessment is denied, the Reassessment Application Form with new evidence and $100 plus HST.
How to apply in Ontario, step by step
The steps follow the order Skilled Trades Ontario describes.
- Confirm your trade’s hours in Appendix A of the application guide and gather a Work Experience Verification Form or detailed letter from each reference, with translations by a member of a recognized Canadian association of translators where needed. Self-employed applicants add a résumé, proof of the business and verifications from other trades businesses.
- Submit the application by email to assessments@skilledtradesontario.ca or through the STO Portal (New application, then Trade Equivalency Assessment). Incomplete applications are not accepted.
- Pay the $235 plus HST assessment fee once Skilled Trades Ontario confirms the file is complete. It makes three attempts to reach each reference and may require one or more interviews; missing a required interview means a denial. A denied assessment can be reassessed with new evidence for $100 plus HST.
- If approved, pay the $150 plus HST exam fee in the portal, receive an Authorization to Test letter by email, and book a date, time and location in the portal. Since 1 February 2026 Skilled Trades Ontario delivers its certifying exams itself at 24 exam centres; some Red Seal exams are administered online through the national rsexam.ca system, and the confirmation email says which.
- Write the multiple-choice exam: 90 to 150 questions depending on the trade, four hours, 70% to pass, in English or French. Results are published to your portal within 15 business days, with an email notice and a paper copy by mail.
- If you do not pass, wait the mandatory 30 days and pay the exam fee again before rebooking. After passing, pay the certificate fee to receive your Certificate of Qualification; in a compulsory trade it is renewed annually for $60 plus HST.
What it costs in Ontario
Fees as published on 31 October 2026: Trade Equivalency Assessment $235 plus HST ($265.55 including HST), one fee per trade; reassessment $100 plus HST; certifying exam $150 plus HST for each attempt, including rewrites, since the free first attempt applies only to apprentices who completed on or after 1 January 2025; a certificate fee after passing, whose amount is not published; an annual renewal of $60 plus HST for Certificates of Qualification in compulsory trades; verification of an out-of-province certificate $50 plus HST. Test-centre fees for crane operators are $495 for Mobile Crane Operator 1 and Tower Crane Operator and $420 for Mobile Crane Operator 2, and welder practical assessment and electrical code course fees vary by provider. Canadian Forces veterans and reservists are exempt from the assessment fee.
How long it takes
Plan around these published timelines; they start when the authority has a complete application.
- Assessment processing time is not published. Skilled Trades Ontario checks completeness first, then asks for payment, then phones references and may interview you.
- How long an approval stays valid is not published; the Authorization to Test letter follows payment of the exam fee, and you then choose a date, time and location in the portal. For an online Red Seal exam, an account activation email from ccda.alerts@gmail.com arrives 7 to 14 days before the exam. Activate the account within 72 hours of the time on the email; the username is the email address on file with Skilled Trades Ontario and is case sensitive. If you miss the window, call 1-855-299-0028.
- Results are published to the STO portal within 15 business days, with an email notice and a paper copy by regular mail. A rewrite waits a mandatory 30 days.
- How long the Certificate of Qualification takes to arrive after a pass is not published.
Writing the Red Seal exam in Ontario
Where and how the exam is written, and what to bring.
- Exams are written at 24 centres: Skilled Trades Ontario’s headquarters in Mississauga and college campuses in Scarborough, Whitby, Midland, Toronto, Etobicoke, Ottawa, Pembroke, Peterborough, Belleville, Cornwall, Kingston, North Bay, Timmins, Sudbury, Thunder Bay, Kenora, Sault Ste. Marie, Kitchener, London, Owen Sound, Sarnia, Stoney Creek and Windsor. The exam is paper-based or electronic as the confirmation email says, and some Red Seal exams run on the national rsexam.ca system.
- Bring government-issued photo identification; phones, watches, hats, wallets and smart technology are not permitted. The exam has 90 to 150 multiple-choice questions, a four-hour limit and a 70% pass mark.
- Exams are in English or French only. English and French dictionaries are available at every exam location; your own foreign-language dictionary must be word-to-word only and is inspected before and after the exam. Interpreters are provided only as a medically supported accommodation requested on the Exam Accommodation Request Form before booking.
- Welders pass the practical assessment before applying: six projects covering FCAW, SMAW, GMAW and GTAW plate assemblies and oxy-acetylene cutting, in six hours plus two hours for bending the coupons, at one of 14 test centres that set their own fees. A centre schedules a session once it has three to six registrations. Only one re-test is allowed among the five welded assemblies; two fully fractured coupons in one assembly, or a failed re-test, fail the assessment. Results are issued within four weeks.
- Crane operators pass a three-part Demonstration of Skills Test in order (hand signals, load chart, then equipment) at Durham College, HITE Services Ltd., Foran’s Training Inc. or the Operating Engineers Training Institute of Ontario; the parts may be taken at different centres. Skilled Trades Ontario recommends completing all three before applying, and the centres send the results to it before the assessment decision.
- Hairstylist and eight other compulsory trades have a provincial certifying exam rather than the Red Seal in Ontario.
If you do not pass
Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.
- A mandatory 30-day waiting period applies after an unsuccessful attempt, and the $150 plus HST exam fee is paid again before rescheduling.
- The number of attempts allowed and what happens after repeated failures are not published for Trade Qualifiers; whether the results report shows a section breakdown is not stated.
- Crane operators retake the skills test at least 30 days after the last attempt, and failing any part more than twice means a wait of one full calendar year.
Compulsory trades in Ontario
Ontario has 23 compulsory trades: Alignment and Brakes Technician, Auto Body and Collision Damage Repairer, Auto Body Repairer, Automotive Electronic Accessory Technician, Automotive Service Technician, Electrician – Construction and Maintenance, Electrician – Domestic and Rural, Fuel and Electrical Systems Technician (inactive, with no new registrations and no certifying exam), Hairstylist, the three Hoisting Engineer crane trades, Motorcycle Technician, Plumber, Refrigeration and Air Conditioning Systems Mechanic, Residential (Low Rise) Sheet Metal Installer, Residential Air Conditioning Systems Mechanic, Sheet Metal Worker, Sprinkler and Fire Protection Installer, Steamfitter, Transmission Technician, Truck and Coach Technician and Truck-Trailer Service Technician. Working in one requires a Certificate of Qualification, a Provisional Certificate of Qualification or a Registered Training Agreement. Heavy Duty Equipment Technician, Welder, General Carpenter, Cook and Baker-Pâtissier are not compulsory, and gas technicians are certified by the Technical Standards and Safety Authority rather than Skilled Trades Ontario.
Applying from outside Canada or as a newcomer
What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.
- Trades experience gained outside Canada is accepted, no residency, citizenship or work-authorization requirement is stated, and an international passport or Canadian immigration documents are acceptable identification. Skilled Trades Ontario does not say whether you may apply while outside Canada, and the exam is written in Ontario.
- Foreign certificates and training are optional supporting evidence only: the assessment rests on verified hours and competency, with each reference writing in their own language and a member of a recognized Canadian association of translators translating it. Electricians trained abroad show Canadian Electrical Code knowledge through legal Canadian work or a code course of at least 12 hours.
- Refugees, refugee claimants and immigrants from war-torn or disaster-affected regions may be exempted from some evidence requirements. Canadian Forces QL5 or DP2 holders in nine matched trades skip the verifications and the assessment fee.
- In a compulsory trade an approved Trade Qualifier may not work in the trade until passing the certifying exam; the Provisional Certificate of Qualification is issued only to Ontario apprenticeship completers, so registering as an apprentice is the published way to work legally in the meantime.
If you are already certified elsewhere in Canada
A holder of a valid authorizing certificate from another Canadian province or territory in an equivalent trade applies under the Ontario Labour Mobility Act for verification ($50 plus HST) and receives an Ontario Certificate of Qualification with no further training or examination; the Trade Equivalency Assessment is not for them. Holders of equivalent Quebec certificates and registered Quebec apprentices are exempt from the compulsory-trade credential requirement in seven trades, including electrician, plumber, steamfitter, sheet metal worker and refrigeration mechanic.
Good to know
Details that catch people out.
- Skilled Trades Ontario took over delivery of its certifying exams on 1 February 2026 and books them in its portal; the Kenora centre is the latest of its 24 exam-centre partnerships with colleges and institutions. Client Services: 647-847-3000 or 1-855-299-0028, Monday to Friday 7 am to 7 pm; assessments go to assessments@skilledtradesontario.ca.
- Registered apprentices in Ontario or another province or territory are warned that approval is not guaranteed, and that applying could affect their relationship with their employer or sponsor and, in some trades, their ability to work. Skilled Trades Ontario advises talking to a local Employment Ontario apprenticeship office first.
- Ontario names some trades differently: Truck and Coach Technician is the Red Seal Truck and Transport Mechanic, Architectural Glass and Metal Technician the Glazier, Horticultural Technician the Landscape Horticulturist, and Drywall, Acoustic and Lathing Applicator the Lather. The current Trade Qualifier Application Guide is Version 2.
Words Skilled Trades Ontario uses
Trade Equivalency Assessment; Trade Qualifier; Certificate of Qualification; certifying exam; Authorization to Test letter; Training Standard; Évaluation d’équivalence professionnelle. The plain-language guide connects these to the words other provinces and tradespeople use.
Official pages this guide was read from
Rules and fees change. These are the pages Skilled Trades Ontario publishes; confirm the current figures there before you pay or travel.
- Skilled Trades Ontario: Trade Equivalency Assessment
- Skilled Trades Ontario: Trade Qualifier Application Guide (PDF, hours by trade)
- Skilled Trades Ontario: Trade Qualifier Application Form (PDF)
- Skilled Trades Ontario: Work Experience Verification Form (PDF)
- Skilled Trades Ontario: exam scheduling, fees and exam centres
- Skilled Trades Ontario: general exam preparation guide (PDF, June 2026)
- Skilled Trades Ontario: Ontario Welder Practical Assessment (PDF, September 2025)
- Skilled Trades Ontario: working in the compulsory trades
- Skilled Trades Ontario: Apprenticeship Programs Quick Facts Chart (PDF, June 2026)
- Skilled Trades Ontario: Certificate of Qualification and renewals
- Skilled Trades Ontario: recognized Canadian certificates
- Skilled Trades Ontario: Canadian Forces
- TSSA: fuels industry professionals (gas and oil burner technicians)
Prepare for the exam
Once Skilled Trades Ontario approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.
Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.
Other provinces and territories
Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Saskatchewan
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Northwest Territories
- Challenge the Red Seal exam in Nunavut
Common questions
How many hours do I need to challenge the Red Seal exam in Ontario?
Hours equal to the trade’s training time, counted at about 1,800 a year of hands-on work and printed in Appendix A of the application guide: 9,000 for electrician, plumber, steamfitter, sheet metal worker and refrigeration mechanic; 8,000 for millwright, machinist, cabinetmaker and instrumentation technician; 7,220 for automotive service technician; 7,200 for carpenter and sprinkler fitter; 7,000 for heavy duty equipment technician and baker; 6,720 for truck and coach technician; 6,000 for welder, cook and parts technician; 3,500 for hairstylist.
What does the Trade Equivalency Assessment cost in Ontario?
$235 plus HST ($265.55) for the assessment, one fee per trade, then $150 plus HST for each exam attempt, including rewrites. A certificate fee follows a pass, and its amount is not published. Certificates in compulsory trades renew for $60 plus HST a year, and a reassessment costs $100 plus HST.
Does Ontario accept experience from outside Canada?
Yes. The Trade Equivalency Assessment explicitly accepts trades experience gained outside Canada, in another province or in the Canadian Forces, verified by references on the Work Experience Verification Form or a detailed letter, translated by a member of a recognized Canadian association of translators where needed. An international passport is acceptable identification. The exam is written in Ontario, in English or French.
Where do I write the exam in Ontario?
At one of 24 exam centres, from Skilled Trades Ontario’s Mississauga headquarters to college campuses in Toronto, Ottawa, London, Windsor, Sudbury, Thunder Bay and Kenora, booked in the STO Portal after you pay the exam fee. Some Red Seal exams are delivered online through the national rsexam.ca system; the confirmation email says which.
What happens if I fail the exam in Ontario?
You wait a mandatory 30 days and pay the $150 plus HST exam fee again before rebooking. Skilled Trades Ontario does not publish an attempt limit for Trade Qualifiers. Results appear in your portal within 15 business days.
Can I keep working in a compulsory trade while I wait in Ontario?
Not on the strength of the assessment. In Ontario’s 23 compulsory trades you need a Certificate of Qualification, a Provisional Certificate of Qualification or a Registered Training Agreement to work, and the provisional certificate is issued only to Ontario apprenticeship completers. Registering as an apprentice is the published way to work legally while you prepare.
Which Ontario trades need extra proof?
Electricians must show Canadian Electrical Code knowledge or complete a code course of at least 12 hours. Welders submit the practical assessment certificate with the application, earned at one of 14 Ontario test centres over six projects covering four welding processes and oxy-fuel cutting. Cooks and bakers need a Food Handler certificate from the past three years. Crane operators file a Declaration of Experience and pass a three-part skills test. Gas and oil burner technicians are certified by TSSA, not Skilled Trades Ontario.