How to challenge the Red Seal exam in Saskatchewan
How Saskatchewan’s Trade Qualifier assessment works: 1.5 times the apprenticeship, the $400 assessment and $175 exam, monthly sittings in Regina and Saskatoon.
- Who decides
- Saskatchewan Apprenticeship and Trade Certification Commission (SATCC)
- What the route is called
- Trade Qualifier assessment (challenge the journeyperson exam)
- Experience required
- 1.5 × the apprenticeship in years and hours, on a Form 6A per employer (6 years and 10,800 hours for a 4-year, 7,200-hour trade)
- Application fee
- $400 assessment ($250 for hairstylists trained in Canada); exam $175
- Time to a decision
- Not published
- Exam attempts
- Four for citizens and permanent residents, two for others; three months before the second attempt; upgrading after a third failure
- The exam
- The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.
References checked . Confirm application and exam requirements with the responsible authority.
Who can challenge the Red Seal exam in Saskatchewan
SATCC offers the Trade Qualifier route to experienced workers in non-compulsory designated trades who are not apprentices or journeypersons. They submit proof of working 1.5 times the apprenticeship for the trade, which each trade’s journeyperson examination information sheet states in years and hours: 6 years and 10,800 hours for a four-year, 7,200-hour trade such as Carpenter, Millwright or Automotive Service Technician, and 4.5 years and 8,100 hours for a three-year trade such as Welder, Cook or Parts Technician.
The experience is documented on a Verification of Trade Experience form (Form 6A) for each employer, signed by you and an employer representative and naming the supervising journeyperson. The Form 6A lists the trade’s work activities, and some set minimums or caps: the Welder form requires tradespersons to have at least 900 hours of shielded metal arc welding and 900 hours of flux-cored, metal-cored or gas metal arc welding; the Lather form requires at least 1,500 hours, and credits at most 3,000, in each of framing, suspended ceilings and gypsum board installation; the Carpenter form caps credit at 1,800 hours each for common skills, concrete work and framing.
The five compulsory trades are Construction Electrician, Plumber, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker and Sprinkler Fitter. SATCC asks anyone applying to challenge the exam in one of them to contact its Assessment Unit (ATCAssessment@gov.sk.ca) first, and applicants in those trades must provide credentials and transcripts along with the Form 6A and employer letters.
You can apply for the assessment from any province or country, but once approved you must be in Saskatchewan with a Saskatchewan mailing address before you can register for the exam. Only journeyperson credentials issued in Canada are recognized, so a foreign certificate goes through this assessment. Canadian citizens and permanent residents get four attempts at the written exam and four at any practical exam; other applicants get two of each, with more available after they become citizens or permanent residents. Translation rules and the exam language are not published on the SATCC pages.
Hours required by trade in Saskatchewan
These are the experience figures Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.
Unless a trade’s note says otherwise:
- Published on the trade’s journeyperson examination information sheet
- A trade-specific Form 6A is required
| Trade | Experience required | Notes |
|---|---|---|
| Agricultural Equipment Technician | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Auto Body and Collision Technician | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; the 2026 written examination schedule lists a practical exam but the trade’s examination information sheet does not, so ask SATCC |
| Automotive Refinishing Technician | 5,400 (3 years) | 1.5 × the 3,600-hour apprenticeship |
| Automotive Service Technician | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Boilermaker | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Bricklayer | 9,000 (6 years) | 1.5 × the 6,000-hour apprenticeship |
| Cabinetmaker | 9,600 (6 years) | 1.5 × the 6,400-hour apprenticeship |
| Carpenter | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; credit capped at 1,800 hours each for common skills, concrete work and framing |
| Construction Craft Labourer | 3,600 (3 years) | 1.5 × the 2,400-hour apprenticeship; the Form 6A’s cap of 600 hours per activity applies to apprentices |
| Construction Electrician (compulsory) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; contact the Assessment Unit before applying |
| Cook | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Glazier | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Hairstylist | 5,400 (3 years) | 1.5 × the 3,600-hour apprenticeship; practical exam after the written exam; $250 assessment for hairstylists trained in Canada |
| Heavy Duty Equipment Technician | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Industrial Mechanic (Millwright) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Instrumentation and Control Technician | 10,200 (6 years) | 1.5 × the 6,800-hour apprenticeship |
| Insulator (Heat and Frost) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Ironworker (Reinforcing) | 5,400 (3 years) | 1.5 × the 3,600-hour apprenticeship |
| Ironworker (Structural/Ornamental) | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Landscape Horticulturist | 9,000 (6 years) | 1.5 × the 6,000-hour apprenticeship |
| Lather (Interior Systems Mechanic) | 9,000 (6 years) | 1.5 × the 6,000-hour apprenticeship; at least 1,500 and at most 3,000 hours credited in each of framing, suspended ceilings and gypsum board installation |
| Machinist | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; practical exam after the written exam |
| Metal Fabricator (Fitter) | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Mobile Crane Operator | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Painter and Decorator | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Parts Technician | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship |
| Plumber (compulsory) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; contact the Assessment Unit before applying |
| Powerline Technician | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; mandatory upgrading for tradespersons; practical exam after the written exam |
| Recreation Vehicle Service Technician | 7,200 (4.5 years) | 1.5 × the 4,800-hour apprenticeship |
| Refrigeration and Air Conditioning Mechanic (compulsory) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; contact the Assessment Unit before applying; Form 6A revised August 2026 |
| Roofer | 6,750 (4.5 years) | 1.5 × the 4,500-hour apprenticeship |
| Sheet Metal Worker (compulsory) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; contact the Assessment Unit before applying |
| Sprinkler Fitter (compulsory) | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; contact the Assessment Unit before applying |
| Steamfitter/Pipefitter | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Tilesetter | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship; Form 6A revised January 2026 |
| Tower Crane Operator | 4,500 (3 years) | 1.5 × the 3,000-hour apprenticeship; the Form 6A records seat, maintenance and rigging hours per crane |
| Truck and Transport Mechanic | 10,800 (6 years) | 1.5 × the 7,200-hour apprenticeship |
| Welder | 8,100 (4.5 years) | 1.5 × the 5,400-hour apprenticeship; tradespersons need at least 900 hours SMAW and 900 hours FCAW, MCAW or GMAW; practical exam after the written exam |
Documents and forms you need
Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) uses.
- The Trade Qualifier application, completed and paid online in the MyATC portal.
- A Verification of Trade Experience form (Form 6A) for your trade, one per employer, listing the work activities and hours for each period of employment, signed by you and an employer representative and naming the supervising journeyperson and certificate number.
- Credentials, transcripts and employer letters, uploaded in MyATC; credentials and transcripts are required in the compulsory trades. International applicants add self-employment evidence such as a business licence.
- For the exam, government-issued photo identification that matches your MyATC record. For accessibility services, a Verification of Disability Form completed by a licensed health-care provider, or for a learning disability a psychoeducational or psychological assessment by a registered psychologist.
How to apply in Saskatchewan, step by step
The steps follow the order Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) describes.
- If your trade is compulsory (Construction Electrician, Plumber, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker or Sprinkler Fitter), contact SATCC’s Assessment Unit before you apply.
- Complete the Trade Qualifier application in the MyATC portal and pay the $400 assessment fee.
- Submit a Form 6A for each employer, signed by you and an employer representative, with your credentials, transcripts and employer letters; international applicants also supply self-employment evidence where relevant.
- The SATCC Assessment Unit verifies the hours, dates and tasks on each form, then you receive a results letter: approved to challenge the exam once you live in Saskatchewan, not approved (you must apply as an apprentice once you live there), or more information needed. The letter is not a certificate.
- Once approved and living in Saskatchewan, register for the written exam, and the practical exam where your trade has one, through MyATC and pay the $175 exam fee; registration opens about a month before each sitting and closes when it is full.
- Write the closed-book exam with government photo ID at an SATCC centre: Regina and Saskatoon sit every month from February to December, and Estevan, La Ronge, Lloydminster, North Battleford, Prince Albert, Swift Current and Yorkton four times a year. You need 70% on the written exam before any practical exam, and results are emailed from MyATC.
- If you do not pass, you can register for the next sitting at once but must wait three months before the second attempt, paying $175 each time; after a third unsuccessful attempt you must apply for an upgrading evaluation ($125) and complete the prescribed upgrading first.
What it costs in Saskatchewan
Fees as published in the schedule in force since 2 July 2025, read on 31 October 2026: Trade Qualifier assessment $400 ($250 for hairstylists and estheticians trained in Canada); written examination $175; practical examination $175; examination results review $175; request for upgrading evaluation $125; replacement of a certificate or document $75; tuition $120 a week, with a $360 minimum, where technical upgrading is prescribed. The $175 exam fee is paid separately from the assessment, and each retake is registered and paid again. Fees are paid by credit card in MyATC or by credit or debit card at the Regina and Saskatoon offices, in Canadian funds.
How long it takes
Plan around these published timelines; they start when the authority has a complete application.
- Assessment processing time and how long an approval stays valid are not published; the results letter follows once the Assessment Unit has verified every Form 6A.
- Exam registration in MyATC opens up to about a month before each sitting and closes when the event is full; Regina and Saskatoon sit monthly from February to December, the seven other centres four times a year, and there are no exams in January. The 2027 schedules are already published.
- Results are emailed from MyATC; no number of days is published. A second attempt must wait three months.
Writing the Red Seal exam in Saskatchewan
Where and how the exam is written, and what to bring.
- Written exams are held at the Regina Exam Centre (third floor, 2221 Cornwall Street) and in Saskatoon monthly, and in Estevan, La Ronge, Lloydminster, North Battleford, Prince Albert, Swift Current and Yorkton four times a year.
- Bring government-issued photo ID matching your MyATC record; the exam is closed book, calculators, pencils and worksheets are supplied, and bags, hoodies, hats, coats, watches, food and electronic devices are not allowed. Sittings are video- and audio-recorded, and the Academic Misconduct Policy applies.
- The pass mark is 70%. Trades whose journeyperson exam has a written and a practical part include Hairstylist, Machinist, Powerline Technician and Welder; the 2026 written examination schedule also lists Auto Body and Collision Technician, whose examination information sheet shows no practical. Powerline Technician tradespersons must also complete mandatory upgrading.
- Exam languages are not published; accessibility services for candidates with a disability are arranged through the Saskatoon office with a Verification of Disability Form.
If you do not pass
Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.
- Trade Qualifiers have a maximum of four attempts at the written exam and four at the practical; applicants who are not Canadian citizens or permanent residents have two of each, with more available after they become one.
- You can register for the next sitting immediately in MyATC, but three months must pass before the second attempt, and each retake costs $175.
- After a third unsuccessful attempt you must request an upgrading evaluation ($125) and complete the prescribed upgrading before the next attempt. An examination results review costs $175.
Compulsory trades in Saskatchewan
Saskatchewan’s compulsory apprenticeship trades are Construction Electrician, Plumber, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker and Sprinkler Fitter: you must be a registered apprentice or a certified journeyperson to do the work. SATCC offers the Trade Qualifier route to experienced workers in non-compulsory trades; anyone applying to challenge the exam in a compulsory trade is asked to contact its Assessment Unit first and must provide credentials and transcripts. Steamfitter, automotive, heavy duty, welder, carpenter, hairstylist and cook are not compulsory. Gasfitter and baker are not designated trades in Saskatchewan at all; gasfitter licences come from the Technical Safety Authority of Saskatchewan, with SATCC administering the exam.
Applying from outside Canada or as a newcomer
What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.
- You can apply for the Trade Qualifier assessment from any province or country; if approved, you need a Saskatchewan address and mailing address before you can attempt the exam.
- Only journeyperson credentials issued in Canada are recognized, so a foreign certificate goes through the assessment, documented on Form 6A with credentials, transcripts, employer letters and any self-employment evidence. In a compulsory trade, contact the Assessment Unit before applying. Translation rules and the exam language are not published.
- An internationally trained worker approved as a Trade Qualifier in a compulsory trade can have an employer register a Contract of Apprenticeship, after which SATCC issues a Special Permit to work while the certification requirements, including the exam, are completed. Apprenticeship itself requires permanent residence or citizenship.
- Exam attempts depend on status: four for citizens and permanent residents, two for others.
If you are already certified elsewhere in Canada
Only journeyperson credentials issued in Canada are recognized in Saskatchewan; a certificate from another country goes through the Trade Qualifier assessment. SATCC’s credential look-up tool, launched on 4 May 2026, holds Saskatchewan-issued certificates only and points to the Red Seal website for credentials from other provinces and territories; ask the commission how it treats an out-of-province certificate.
Good to know
Details that catch people out.
- Industrial Electrician, Gasfitter, Baker, Drywall Finisher and Plasterer, Floorcovering Installer, Concrete Finisher, the Heavy Equipment Operator trades, Appliance Service Technician, Motorcycle Technician, Transport Trailer Technician, Oil Heat System Technician and Tool and Die Maker are not designated trades in Saskatchewan, so there is no Saskatchewan challenge route for them.
- SATCC’s head office is at 2140 Hamilton Street, Regina (306-787-2444, toll-free 1-877-363-0536, apprenticeship@gov.sk.ca); the Saskatoon office is at 603 45th Street West. Several Form 6A versions were reissued in 2025 and 2026, so download the current one from the forms page.
Words Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) uses
Trade Qualifier; challenge the journeyperson exam; Verification of Trade Experience (Form 6A); MyATC; experienced workers; Special Permit; upgrading evaluation; Assessment Unit. The plain-language guide connects these to the words other provinces and tradespeople use.
Official pages this guide was read from
Rules and fees change. These are the pages Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) publishes; confirm the current figures there before you pay or travel.
- SATCC: experienced workers
- SATCC: Trade Qualifier application FAQs
- SATCC: international application process (compulsory trades: contact the Assessment Unit)
- SATCC: exams for experienced workers
- SATCC: designated trades, each with its journeyperson examination information sheet
- SATCC: Powerline Technician examination information, with mandatory upgrading and a practical exam (PDF)
- SATCC: forms, including Form 6A for each trade
- SATCC: fee schedule as of 2 July 2025 (PDF)
- SATCC: 2026 written examination schedule and protocols (PDF)
- SATCC: Red Seal written examination study guide (PDF)
- SATCC: learning support and accessibility services
Prepare for the exam
Once Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.
Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.
Other provinces and territories
Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Ontario
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Northwest Territories
- Challenge the Red Seal exam in Nunavut
Common questions
How many hours do I need to challenge the Red Seal exam in Saskatchewan?
1.5 times the apprenticeship, in years and hours, documented on a Form 6A for each employer: 6 years and 10,800 hours for steamfitter, carpenter, millwright, heavy duty equipment technician, automotive service technician, truck and transport mechanic, machinist and glazier, and for the compulsory trades of construction electrician, plumber, sheet metal worker and refrigeration mechanic, where SATCC asks you to contact its Assessment Unit first; 4.5 years and 8,100 for welder, cook, parts technician, boilermaker and metal fabricator; 3 years and 5,400 for hairstylist. Some forms add minimums, such as 900 hours each of SMAW and wire-feed welding for welders.
Can I challenge the exam in a compulsory trade such as electrician or plumber?
SATCC offers the Trade Qualifier route to experienced workers in non-compulsory trades. If your trade is one of the five compulsory trades (Construction Electrician, Plumber, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker or Sprinkler Fitter), contact its Assessment Unit before you apply; applicants in those trades must provide credentials and transcripts as well as the Form 6A and employer letters.
What does it cost to challenge the Red Seal exam in Saskatchewan?
A $400 Trade Qualifier assessment ($250 for hairstylists and estheticians trained in Canada), then $175 for the written exam, paid separately when you register, and $175 for a practical exam where your trade has one. Each retake costs $175, a results review $175 and an upgrading evaluation $125.
Can I apply to Saskatchewan from another province or country?
Yes, the assessment can be filed from anywhere through MyATC. Once approved, you must have a Saskatchewan address before you can register for the exam, which is written at SATCC centres in the province. If you are not approved, the letter tells you to apply as an apprentice once you live in Saskatchewan.
How many exam attempts do I get in Saskatchewan?
Four at the written exam and four at any practical exam if you are a Canadian citizen or permanent resident; two of each otherwise, with more available once you become a citizen or permanent resident. Three months must pass before a second attempt, and after a third unsuccessful attempt you must complete prescribed upgrading.
Where and when is the exam written in Saskatchewan?
Regina and Saskatoon hold sittings every month from February to December; Estevan, La Ronge, Lloydminster, North Battleford, Prince Albert, Swift Current and Yorkton hold four a year. Registration in MyATC opens about a month before each date. There are no exams in January.
Can I keep working in a compulsory trade while I wait?
An internationally trained worker approved as a Trade Qualifier in a compulsory trade can have an employer register a Contract of Apprenticeship, and SATCC then issues a Special Permit to work while the exam and other requirements are completed. In a voluntary trade no permit is needed.
Does Saskatchewan recognize my certificate from another province?
Saskatchewan recognizes journeyperson credentials issued in Canada; a certificate from another country goes through the Trade Qualifier assessment instead. SATCC’s online look-up covers only Saskatchewan-issued certificates, so ask SATCC how it treats a certificate from another province or territory.