How to challenge the Red Seal exam in Nunavut: hours and fees
How Trade Qualification works in Nunavut: the apprenticeship term plus 1,800 hours, no published fees, the supplemental exam rules and who to contact.
- Who decides
- Department of Family Services — Nunavut Apprenticeship Certification Unit
- What the route is called
- Trade Qualification program
- Experience required
- Apprenticeship term plus 1,800 hours (9,000 for a four-level trade)
- Application fee
- None in the regulations; nothing published
- Time to a decision
- Not published
- Exam attempts
- One supplemental exam after three months if you scored 50% or more; otherwise a program of study first
- The exam
- The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.
References checked . Confirm application and exam requirements with the responsible authority.
Who can challenge the Red Seal exam in Nunavut
Nunavut’s page says that if you are an experienced trade worker with significant hands-on experience in your trade and want to be certified while you work in Nunavut, you can apply for the Trade Qualification program, and that your regional Career Development Officer has the details. The regulations behind it require proof satisfactory to the Supervisor of Apprenticeship that you worked in the designated trade with sufficient variety of experience to establish competence, for not less than the term of the apprenticeship program plus 1,800 hours. Each apprenticeship level is 1,800 hours, so a four-level trade needs 9,000 hours, a three-level trade 7,200 and a two-level trade 5,400; the Ellis Chart reports the same figures for Nunavut.
No residency, citizenship or work-authorization rule, no application form and no exam schedule are published; the program is described as certification while you work in Nunavut. Experience and certificates from outside Canada are not addressed, and the only recognition rule covers certificates from other Canadian provinces and territories. An interpreter may help you in a territorial exam but not in the Red Seal exam.
Hours required by trade in Nunavut
These are the experience figures Department of Family Services — Nunavut Apprenticeship Certification Unit publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.
Unless a trade’s note says otherwise:
- Apprenticeship term plus 1,800 hours, as the Ellis Chart reports it
| Trade | Experience required | Notes |
|---|---|---|
| Automotive Service Technician | 9,000 | 4 × 1,800 + 1,800 |
| Baker | 7,200 | 3 × 1,800 + 1,800 |
| Cabinetmaker | 9,000 | The chart marks a practical final exam |
| Carpenter | 9,000 | The chart marks a practical final exam |
| Cook | 7,200 | 3 × 1,800 + 1,800 |
| Crane and Hoisting Equipment Operator – Mobile Crane | 7,200 | The chart marks a practical final exam |
| Electric Appliance Repair | 7,200 | 3 × 1,800 + 1,800 |
| Electrician (Construction) | 9,000 | 4 × 1,800 + 1,800. Separate licensing under the Electrical Protection Act |
| Floorcovering Mechanic | 5,400 | The chart marks a practical final exam |
| Gasfitter (First Class) | 7,200 | 3 × 1,800 + 1,800. Separate licensing under the Gas Protection Act |
| Gasfitter (Second Class) | 5,400 | 2 × 1,800 + 1,800. Separate licensing under the Gas Protection Act |
| Glazier | 9,000 | 4 × 1,800 + 1,800 |
| Hairstylist | 5,400 | The chart marks a practical final exam |
| Heavy Equipment Operator (Dozer) | 3,600 | Certificate of qualification only, with no apprenticeship; the chart marks a practical exam for the territorial qualification only |
| Heavy Equipment Operator (Excavator) | 3,600 | Certificate of qualification only, with no apprenticeship; the chart marks a practical exam for the territorial qualification only |
| Heavy Equipment Operator (Tractor-Loader-Backhoe) | 3,600 | Certificate of qualification only, with no apprenticeship; the chart marks a practical exam for the territorial qualification only |
| Heavy Equipment Technician – Off Road Mechanic | 7,200 | 3 × 1,800 + 1,800 |
| Heavy Equipment Technician – Transport Trailer Mechanic | 5,400 | The Ellis Chart’s figure; the chart lists a 3,120-hour apprenticeship, which the rule would make 4,920, so confirm with the office |
| Heavy Equipment Technician – Truck and Transport Mechanic | 7,200 | 3 × 1,800 + 1,800 |
| Industrial Instrument Mechanic | 9,000 | 4 × 1,800 + 1,800 |
| Industrial Mechanic (Millwright) | 9,000 | 4 × 1,800 + 1,800 |
| Insulator (Heat and Frost) | 7,200 | 3 × 1,800 + 1,800 |
| Machinist | 9,000 | 4 × 1,800 + 1,800 |
| Motor Vehicle Body Repair | 9,000 | The chart marks a practical final exam |
| Oil Heat System Technician | 7,200 | 3 × 1,800 + 1,800 |
| Painter and Decorator | 7,200 | 3 × 1,800 + 1,800 |
| Partsperson | 7,200 | 3 × 1,800 + 1,800 |
| Plumber | 9,000 | 4 × 1,800 + 1,800 |
| Powerline Technician | 9,000 | 4 × 1,800 + 1,800 |
| Refrigeration and Air Conditioning Mechanic | 9,000 | 4 × 1,800 + 1,800 |
| Roofer | 9,000 | 4 × 1,800 + 1,800 |
| Sheet Metal Worker | 9,000 | The chart marks a practical final exam |
| Sprinkler System Installer | 9,000 | 7,200 training hours + 1,800 |
| Steamfitter/Pipefitter | 9,000 | 4 × 1,800 + 1,800 |
| Welder | 7,200 | The chart marks a practical final exam |
Documents and forms you need
Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Department of Family Services — Nunavut Apprenticeship Certification Unit uses.
- An application in the form the Supervisor of Apprenticeship accepts. No form is published online, so get it from your regional Career Development Office or the Nunavut Apprenticeship Certification Unit.
- Proof satisfactory to the Supervisor of your work in the trade: its variety across the trade and the total hours. The regulations do not prescribe the documents, so ask what the office accepts, such as employer letters, certificates and pay records.
How to apply in Nunavut, step by step
The steps follow the order Department of Family Services — Nunavut Apprenticeship Certification Unit describes.
- Contact your regional Career Development Office (North Baffin, South Baffin, Kivalliq or Kitikmeot) or the Nunavut Apprenticeship Certification Unit in Iqaluit and say which trade you want to be certified in.
- Apply in the form the Supervisor of Apprenticeship accepts, with proof of your experience: its variety across the trade and total hours of at least the apprenticeship term plus 1,800 hours.
- Once the Supervisor finds the application complete, you may write the qualification examination. The Supervisor sets its structure and content, which may be written or oral questions or a practical demonstration. The 2018 amendment both enacts and repeals section 51(4), which sets the pass mark at 70%, so confirm the pass mark with the Apprenticeship Certification Unit.
- If you do not pass but score at least 50%, you may write one supplemental examination, a different version, after a three-month wait. If you score under 50% or fail the supplemental, the Supervisor requires you to complete a program of study before you can write again.
- Certified journeypersons add the Red Seal by passing the interprovincial Red Seal examination, administered as the Supervisor directs; an interpreter is not permitted in that exam.
What it costs in Nunavut
No fee is published for Trade Qualification. The regulations have contained no fees since 2018, when the amendment repealed the trade instruction course fee and the appeal fee; they set no qualification examination fee, and the government’s page names none. Ask the Apprenticeship Certification Unit whether any administrative charge applies.
How long it takes
Plan around these published timelines; they start when the authority has a complete application.
- Assessment time, how long an approval stays valid, exam dates, when results are released and how the certificate arrives are not published; your Career Development Officer can tell you.
Writing the Red Seal exam in Nunavut
Where and how the exam is written, and what to bring.
- The Supervisor of Apprenticeship sets the structure and content of the qualification examination, which may use objective written or oral questions or a practical demonstration. Section 13 of the 2018 amendment sets the pass mark at 70% in a new section 51(4), and its section 14 repeals section 51(4), so confirm the pass mark with the Apprenticeship Certification Unit.
- Exam locations and frequency are not published; the regional Career Development Offices arrange them.
- If your English is limited you may use an interpreter in any examination except an entrance examination or the Red Seal examination, and the interpreter may not have training or experience in the trade. A French written exam may be used where another jurisdiction has one.
- Obtaining exam content in advance, using unauthorized material, communicating or copying during the exam, or having someone else sit it scores 0% and bars you from any examination for one year.
- The Ellis Chart marks a practical final examination in Nunavut for Carpenter, Sheet Metal Worker, Welder, Hairstylist, Cabinetmaker, Floorcovering Mechanic, Mobile Crane Operator and Motor Vehicle Body Repair.
If you do not pass
Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.
- A failed first attempt with a grade of at least 50%: one supplemental qualification examination, a different version, after a waiting period of three months.
- A first attempt under 50%, or an unsuccessful supplemental: the Supervisor must require a program of study to be completed before any further attempt; after passing it, the exam may be retaken. No maximum number of cycles is set.
- No fee per attempt appears in the regulations.
Compulsory trades in Nunavut
Nunavut has no compulsory trades. The Trade Designation Order lists 49 trades appropriate for apprenticeship and 50 appropriate for certificates of qualification, with no compulsory designation, and the Ellis Chart shows certification as voluntary in Nunavut for every trade on this site; it flags separate licensing for construction electricians and gasfitters under the Electrical Protection Act and the Gas Protection Act. Trades designated for certificates include electrician (construction), plumber, steamfitter/pipefitter, sheet metal worker, refrigeration mechanic, gasfitter, carpenter, welder, millwright, the heavy equipment technician streams, automotive service technician, partsperson, cook, baker, hairstylist, machinist and cabinetmaker. Industrial Electrician, Boilermaker, Bricklayer, Metal Fabricator, the ironworker trades, Tilesetter, Drywall Finisher and Plasterer, Concrete Finisher, Construction Craft Worker, Landscape Horticulturist, Lather, Tower Crane Operator, Agricultural Equipment Technician, Automotive Refinishing Technician, Motorcycle Technician, Recreation Vehicle Service Technician and Tool and Die Maker are not designated.
Applying from outside Canada or as a newcomer
What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.
- No residency, citizenship or work-authorization rule is published. The program is described as certification while you work in Nunavut, so ask your Career Development Officer before planning around applying from elsewhere.
- Experience and certificates from outside Canada are not addressed in the regulations; the only recognition rule covers certificates from other Canadian provinces and territories. Translation requirements are not published.
- No temporary permit is needed to keep working while you wait, because no Nunavut trade is compulsory.
If you are already certified elsewhere in Canada
Since 2018, a person who holds a certification in a designated trade under the laws of a province or another territory that is comparable to a certificate of qualification is eligible to receive a Nunavut certificate of qualification in that trade. It replaced a schedule that recognized Alberta certificates in every designated trade, Manitoba’s Aircraft Maintenance Engineer certificate and New Brunswick’s Oil Burner Mechanic (Residential) certificate. Nunavut’s page adds that tradespeople with a valid Red Seal endorsed trade certificate can work anywhere in Canada.
Good to know
Details that catch people out.
- The Apprenticeship and Certification Act passed in June 2021 would replace the current Act: it defines a trade qualifier, adds a certification-by-attestation route for Nunavummiut with 15 or more years in a trade, creates appeal panels and allows compulsory trades. It comes into force on a day the Commissioner fixes by order. As of 31 October 2026 no such order has been published on nunavutlegislation.ca, so the current Act and its regulations, as amended in 2015 (R-023-2015) and 2018 (R-011-2018), are the rules described on this page.
- The site’s consolidation of the regulations includes amendments only to 1998 and is marked not up to date; it still shows the older examination and recognition rules. The 2015 and 2018 amendments are published separately and change those rules.
- Contacts: Nunavut Apprenticeship Certification Unit, 867-975-5280, nuapprenticeship@gov.nu.ca. Regional Career Development Offices: North Baffin 1-800-567-1514 (northbaffincdo@gov.nu.ca), South Baffin 1-855-975-6580 (southbaffincdo@gov.nu.ca), Kivalliq 1-800-953-8516 (kivalliqcdo@gov.nu.ca), Kitikmeot 1-800-661-0845 (kitikmeotcdo@gov.nu.ca).
Words Department of Family Services — Nunavut Apprenticeship Certification Unit uses
Trade Qualification program; experienced trade worker; qualification examination; supplemental examination; Supervisor of Apprenticeship; Career Development Officer. The plain-language guide connects these to the words other provinces and tradespeople use.
Official pages this guide was read from
Rules and fees change. These are the pages Department of Family Services — Nunavut Apprenticeship Certification Unit publishes; confirm the current figures there before you pay or travel.
- Nunavut: apprenticeship, trade and occupations certification
- Nunavut: Apprenticeship, Trade and Occupations Certification Regulations, consolidation amended only to 1998 and marked not up to date
- Nunavut: 2018 amendment setting the qualification exam rules (R-011-2018, PDF)
- Nunavut: Trade Designation Order R-014-2016 (PDF)
- Nunavut: Apprenticeship and Certification Act, 2021 (not yet in force, PDF)
- Ellis Chart: Construction Electrician, with Nunavut’s trade qualifier hours
Prepare for the exam
Once Department of Family Services — Nunavut Apprenticeship Certification Unit approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.
Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.
Other provinces and territories
Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Saskatchewan
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Ontario
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Northwest Territories
Common questions
How many hours do I need to challenge the Red Seal exam in Nunavut?
The term of the apprenticeship plus 1,800 hours, with enough variety across the trade to show competence. Each level is 1,800 hours, so four-level trades such as electrician, plumber, millwright and carpenter need 9,000 hours, three-level trades such as welder, cook and heavy equipment technician need 7,200, and two-level trades such as gasfitter B and hairstylist need 5,400.
What does Trade Qualification cost in Nunavut?
No fee is published. The regulations have contained no fees since 2018 and the government’s page names none; ask the Apprenticeship Certification Unit whether any administrative charge applies.
How do I apply for Trade Qualification in Nunavut?
Contact your regional Career Development Office or the Nunavut Apprenticeship Certification Unit in Iqaluit. No form is published online; you apply in the form the Supervisor of Apprenticeship accepts, with proof of your hours and the variety of your experience, and the office tells you what documents it needs.
What happens if I do not pass the exam in Nunavut?
The 2018 amendment both enacts and repeals the 70% pass mark in section 51(4), so confirm the pass mark with the Apprenticeship Certification Unit. If you did not pass but scored at least 50%, you may write one supplemental examination after three months. If you scored under 50%, or fail the supplemental, the Supervisor of Apprenticeship requires you to complete a program of study before you can write again.
Can I use an interpreter in the exam?
In a territorial qualification examination, yes, if your English is limited; the interpreter may not have training or experience in the trade. An interpreter is not permitted in an entrance examination or in the Red Seal examination.
Are any trades compulsory in Nunavut?
No. The Trade Designation Order designates trades for apprenticeship and for certificates of qualification without making any compulsory, and the Ellis Chart shows certification as voluntary in Nunavut for every trade on this site. Construction electricians and gasfitters are licensed separately under the Electrical Protection Act and the Gas Protection Act.