Pass Your Red Seal
Exams

Online Red Seal Exam Preparation, built on official standards

only $14.99

  • Full trade access
  • 12 months
Unlock full access

Pay once, good for a full year.

Ironworker (Generalist)

Built on official standards for your trade

Practice exams split like the real exam.
Every answer explained.

only $14.99

  • Full trade access
  • 12 months
Unlock full access

Pay once, good for a full year.

4
Practice exams
480
Questions
240
Flashcards
1,000+
Flashcard Match
50+
Trade math
100+
Simulations
Try Ironworker (Generalist) free12 sample questions now, or Exam 1 with a free account12 sample questionsFree Exam 1

Practice exams

4 exams · 120 questions each

Exam 1 is free. Create a free account and retake it as often as you like, with no expiry. How it works

4 practice exams and 480 original practice questions with answers and explanations, plus 240 flashcards in two exam-weighted sets, for the 120-question Ironworker (Generalist) Red Seal exam. Timed or untimed, with pause and resume. 120 questions in the real exam · 4 hours · 70% pass mark.

Ironworker (Generalist) sample exam questions

Take them as an exam

12 free practice questions with answers and explanations. No account needed.

Sample 1 Ironworker (Generalist), free sample

Two undiluted samples are tested remotely before steel-vessel work. Sample X contains methane and 5.0% oxygen; sample Y contains hydrogen and 20.9% oxygen. Each sample’s only combustible gas is the one named. Which MX6 iBrid combustible-sensor assignment fits these conditions?

Answer Infrared for X; catalytic bead for Y.
Why The MX6 catalytic-bead combustible sensor requires at least 10% oxygen for an accurate response, so it is unsuitable for undiluted X at 5.0%. An appropriately ranged methane infrared sensor does not need oxygen. For Y, oxygen is sufficient for catalytic sensing, while the infrared combustible sensor does not respond to hydrogen. Infrared for both therefore misses Y; catalytic bead for both gives an unreliable result for X; reversing the assignments introduces both errors. This selects combustible-sensing principles for remote testing, not entry permission or a complete atmosphere-testing plan. Oxygen and other hazards require their own assessment.
2. A personal upgrading plan targets a CWB S-class qualification beyond an existing FW classification. With the process, position and other qualification variables kept applicable, which capability does this target add?
Answer Full-thickness groove welding with backing or back-gouging.
Why The S classification adds the specified full-thickness groove-welding capability to the fillet and tack welding covered by FW, with the other qualification variables remaining applicable. A full-thickness weld made from one side without backing is the T-class capability. Fillet welds on a tee joint and tack welds in groove fit-up are already within FW, so they do not describe the added capability in this upgrading target.
3. Two Harrington CB M3 hoists passed inspection immediately before dry indoor storage. Hoist X has been idle for eight months and hoist Y for eighteen months. Based only on these idle periods, which minimum inspection categories does the manual prescribe before return to service?
Answer Frequent inspection for X; periodic inspection for Y.
Why The CB M3 procedure assigns frequent-inspection criteria after more than one month but less than one year idle, and periodic-inspection criteria after more than one year. Eight months puts X in the frequent category; eighteen months puts Y in the periodic category. Specifying periodic inspection for both exceeds the minimum category prescribed solely by X’s idle period. Specifying frequent inspection for both omits Y’s required periodic scope. Reversing the categories assigns each hoist the wrong idle-period branch. These are the minimum categories for the stated storage periods; inspection findings or other applicable requirements may demand additional work.
4. A Manitowoc 18000 is on both crawlers with the mast removed. Its carbody counterweights and its upper counterweight trays and boxes are installed. Under the erection-stage limitations, which movement combination is permitted?
Answer Swing through 360 degrees; do not travel
Why For this table configuration, installing carbody counterweight permits 360-degree swing with upper counterweight trays and boxes present, but travel remains prohibited. Allowing both swing and travel misses the travel restriction. Allowing travel while prohibiting swing reverses the table permissions. Prohibiting both is the listed condition with upper counterweight boxes present but no carbody counterweight, not the stated configuration. These are erection-stage movement limitations, not authorization to carry a suspended load or disregard the applicable operating configuration.
5. Stressing records have been accepted, and the project adopts the FHWA strand-end cut-off procedure. Which tool pair meets that procedure for trimming the strand tails?
Answer An abrasive saw and a plasma cutting torch.
Why This procedure identifies abrasive cutting and plasma cutting for strand-end trimming. The oxyfuel alternatives use the prohibited flame-cutting process, whose heat can soften strand and wedges. A hydraulic strand shear is not one of the two cut-off tools identified by the adopted procedure, even though such cutters have other strand-handling applications. Thus adding a plasma cutter does not make that shear/tool pair conform to this particular procedure. The accepted records and required tail/cap clearances remain separate conditions.
6. A MAX RB441T is being positioned over a right-angle bar crossing in a flat mat. With its centre mark at the intersection, how is the tool oriented for a normal tie?
Answer At 45° to both bars, normal to the mat surface.
Why The tool is turned 45° to the crossing bars in plan and applied perpendicular to the mat surface. The centre mark stays over the intersection. Aligning it along one bar loses the required diagonal presentation. Tilting it 45° from the mat plane also differs from the required perpendicular application, whether its plan direction is diagonal or along a bar. Hold the tool in that position until the automatic tying cycle finishes.
7. A transverse multi-strand tendon is anchored at a thin deck-slab edge. In the Federal Highway Administration (FHWA) local-zone detail, how are successive U-shaped reinforcing bars oriented?
Answer Alternate U-bars open upward and downward around the tendon.
Why The FHWA thin-slab edge-anchorage detail uses multiple U-bars alternating upward and downward, beginning close to the anchor plate. This arrangement intercepts potential diagonal cracks from the upper and lower bearing-plate corners as well as splitting along the tendon line. Alternating left and right changes the plane of the arrangement. Uniformly upward or uniformly downward U-bars repeat one orientation rather than the specified interleaved detail. The approved placing drawings govern the actual installation.
8. A ChemGrout CG-680 high-capacity colloidal plant with a 3CL8 grout pump is being set up for tendon grouting. Which equipment pairing identifies its initial mixing and holding stages?
Answer Centrifugal diffuser pump in mix tank; paddle agitator in storage tank.
Why This CG-680 uses a high-speed centrifugal diffuser pump in the initial colloidal mixing stage to disperse and wet the cementitious particles. Its storage tank uses a paddle agitator to keep the mixed grout uniform while it awaits pumping. Using paddles in both stages omits this plant's centrifugal mixing device. Using diffusers in both stages replaces the specified storage paddle, while putting the paddle first and the diffuser in storage reverses their assigned functions. These are the named plant's components, not a universal arrangement for every grout plant.
9. During dismantling, a Doka d3 tower section assembled upright will be lifted out as one unit by crane. Its stacked frames already have standard d3 couplers. Which additional connection makes those frame joints tension-proof?
Answer Fit the 16 mm spring-locked pins through frame joints
Why Doka requires spring-locked connecting pins for a tension-proof link when tower frames are lifted by crane. Standard stop-ring couplers locate the stacked frames but do not replace those pins for lifting. Diagonal safety catches secure crosses, and d3 safety hooks retain screw-jack heads or feet in the frame. Neither acts as the required inter-frame tensile connection.
10. A curtain-wall perimeter weatherseal splits through its centre after winter panel movement. Peel checks leave sealant strips bonded on both flanks. Cut sections have a deep, nearly rectangular bead, with concrete chips bonded to its rear surface. Which resealing change best addresses this pattern?
Answer Release the rear bond and form a shallower bead section
Why The retained flank bonds and rear-adhered concrete identify cohesive movement failure in a restrained bead rather than a need for more flank adhesion. Bond-breaker backing releases the rear bond, while the shallower movement-joint section reduces restraint. A softer material alone leaves the third bonded face. Priming the rear face promotes that restraint, and increasing bead depth retains or worsens the stiff geometry. The actual reseal dimensions and material follow the weatherseal manufacturer's design.
11. A qualified electrical professional is decommissioning an ABB ACS580-01 conveyor drive. All voltage sources are isolated and locked out. After six minutes, the record confirms zero voltage from every input and motor terminal to protective earth (PE), using a tester verified before and after the checks. Which additional voltage-check arrangement must the drive’s electrical-safety procedure document?
Answer Measure UDC+ to PE, then UDC- to PE.
Why The ABB procedure also requires zero voltage from each DC terminal, UDC+ and UDC-, to PE. A measurement only between UDC+ and UDC- does not replace those two earth-referenced checks. Input phase-to-phase and motor phase-to-phase measurements concern different terminal relationships and do not complete the required DC checks. The manufacturer’s five-minute wait has elapsed, but waiting alone does not verify de-energization. These measurements and the correct terminal-contact method belong to the qualified electrical professional; the generalist verifies the decommissioning documentation before disassembly.
12. A confined machine-base grout repair will use SikaGrout-428 FS CA, placed directly without a bonding agent. Defective grout has been removed and sound concrete roughened. Immediately before placing the repair grout, what concrete surface condition is required?
Answer Saturated surface dry, with all standing water removed
Why For direct placement without a bonding agent, the manufacturer requires prewetted concrete in saturated surface-dry condition with free-standing water removed. A water film can change the grout's local water content. Dry unsealed concrete can draw water from fresh grout; a dry sealed condition is not the stated direct-placement preparation. A bonding-agent system has separate instructions and is excluded from this scenario.

Start free

Interactive simulations

Animated simulations built for Red Seal trades. See inside pumps, transmissions, air brakes, gears and heavy machinery, watch every part move, and interact with each one as it runs.

Diagrams and symbols

Learn to read the diagrams and schematic symbols used in your trade.

How things work

Animated section drawings show what happens inside the equipment as it runs.

Terminology

Learn the correct name and job of every part.

Exam breakdown

Red Seal practice tests and exam prep

The official Ironworker (Generalist) Red Seal exam, also called the interprovincial (IP) exam, has 120 questions across 6 topic blocks. Open a block to see its tasks and subtasks.

120
Multiple choice questions
4 hours
Writing time
70%
Pass mark
Major Work Activity% of examReal examPractice bank
APerforms common occupational skills12%1456

A-1 · Maintains safe and healthy workplace

4 official exam questions · 16 in the practice bank

  • A-1.01 Maintains safe work environment
  • A-1.02 Uses personal protective equipment (PPE) and safety equipment
  • A-1.03 Participates in healthy and respectful work environment

A-2 · Uses and maintains tools and equipment

5 official exam questions · 20 in the practice bank

  • A-2.01 Uses hand tools and measuring tools
  • A-2.02 Uses power tools
  • A-2.03 Uses bending tools and equipment
  • A-2.04 Uses powder-actuated tools
  • A-2.05 Uses mobile elevating work platforms (MEWP)
  • A-2.06 Uses material handling equipment
  • A-2.07 Uses ladders
  • A-2.08 Uses scaffolding
  • A-2.09 Uses surveying equipment
  • A-2.10 Uses welding equipment
  • A-2.11 Uses mechanical cutting equipment
  • A-2.12 Uses thermal cutting equipment

A-3 · Organizes work

3 official exam questions · 12 in the practice bank

  • A-3.01 Organizes materials and supplies
  • A-3.02 Performs layout
  • A-3.03 Uses drawings and documentation
  • A-3.04 Plans tasks

A-4 · Maintains continuous learning

1 official exam question · 4 in the practice bank

  • A-4.01 Upskills in new trade practices and procedures
  • A-4.02 Upskills in emerging technologies

A-5 · Uses communication and mentoring techniques

1 official exam question · 4 in the practice bank

  • A-5.01 Uses communication techniques
  • A-5.02 Uses mentoring techniques
BPerforms rigging, hoisting and positioning, and mobilization, erection, and demobilization of cranes26%32128

B-6 · Plans lift

8 official exam questions · 32 in the practice bank

  • B-6.01 Assesses load
  • B-6.02 Performs pre-lift analysis
  • B-6.03 Selects rigging, hoisting and positioning equipment
  • B-6.04 Secures lift area

B-7 · Rigs, hoists and positions load

11 official exam questions · 44 in the practice bank

  • B-7.01 Inspects rigging, hoisting and positioning equipment
  • B-7.02 Assembles rigging, hoisting and positioning equipment
  • B-7.03 Attaches rigging equipment to load
  • B-7.04 Performs hoisting and positioning operations
  • B-7.05 Secures load before rigging removal

B-8 · Performs post-lift activities

6 official exam questions · 24 in the practice bank

  • B-8.01 Conducts post-lift inspection
  • B-8.02 Disassembles rigging, hoisting and positioning equipment
  • B-8.03 Maintains rigging, hoisting and positioning equipment

B-9 · Performs mobilization, erection, and demobilization of cranes

7 official exam questions · 28 in the practice bank

  • B-9.01 Mobilizes telescopic boom cranes
  • B-9.02 Erects lattice boom cranes, tower cranes, derricks and components
  • B-9.03 Performs demobilization and disassembly of cranes
CFabricates and installs reinforcing materials18%2184

C-10 · Fabricates reinforcing materials on-site

7 official exam questions · 28 in the practice bank

  • C-10.01 Cuts reinforcing materials
  • C-10.02 Bends reinforcing materials

C-11 · Installs reinforcing materials

14 official exam questions · 56 in the practice bank

  • C-11.01 Places reinforcing material
  • C-11.02 Ties reinforcing materials
  • C-11.03 Splices reinforcing materials
DPerforms pre-stressing/post-tensioning8%1040

D-12 · Places pre-stressed/post-tensioning systems

6 official exam questions · 24 in the practice bank

  • D-12.01 Lays out profile
  • D-12.02 Places tendons and accessories
  • D-12.03 Installs bursting steel and anchorages
  • D-12.04 Connects tendons to anchorages
  • D-12.05 Protects exposed tendons

D-13 · Stresses tendons

3 official exam questions · 12 in the practice bank

  • D-13.01 Sets up stressing equipment
  • D-13.02 Tensions tendons
  • D-13.03 Cuts and caps tendons
  • D-13.04 Removes stressing equipment
  • D-13.05 De-stresses tendons

D-14 · Grouts tendons

1 official exam question · 4 in the practice bank

  • D-14.01 Sets up grouting equipment
  • D-14.02 Installs grout
EPerforms erection, assembly and installation26%31124

E-15 · Installs primary and secondary structural members

16 official exam questions · 64 in the practice bank

  • E-15.01 Uses falsework
  • E-15.02 Attaches structural members
  • E-15.03 Levels, plumbs and aligns structural members
  • E-15.04 Completes installation of structural members

E-16 · Installs ornamental, miscellaneous, and steel cladding systems and components

8 official exam questions · 32 in the practice bank

  • E-16.01 Installs curtain walls, precast walls and window walls
  • E-16.02 Installs miscellaneous components
  • E-16.03 Installs steel cladding and building envelope systems and components

E-17 · Installs conveyors, machinery and equipment

7 official exam questions · 28 in the practice bank

  • E-17.01 Installs material handling systems
  • E-17.02 Performs alignment and commissioning of material handling systems
FPerforms maintenance and upgrading10%1248

F-18 · Decommissions, disassembles and removes structural, ornamental, mechanical and miscellaneous components

7 official exam questions · 28 in the practice bank

  • F-18.01 Ensures decommissioning of structure and components
  • F-18.02 Disassembles structural, ornamental, mechanical and miscellaneous components

F-19 · Maintains and repairs components

5 official exam questions · 20 in the practice bank

  • F-19.01 Assesses current condition of components
  • F-19.02 Performs repairs, revisions and reinforcing of components
  • F-19.03 Replaces components
  • F-19.04 Performs preventative maintenance

Source: the official Ironworker (Generalist) standard and exam breakdown. Check your own requirements with your province or territory.

Questions about Ironworker (Generalist) exam prep

Study guide
Is there a free Ironworker (Generalist) Red Seal practice test?

Yes. Ironworker (Generalist) Exam 1 is a full practice exam of 120 questions with an explanation for every answer. It is free with a free account in every available trade: unlimited retakes, no expiry and no credit card. The same account plays Question Match with Exam 1. Without an account, try 12 sample questions, math formulas, 20 flashcards and Flashcard Match.

Is there a Ironworker (Generalist) practice test with answers?

Yes. Every Ironworker (Generalist) practice question comes with its correct answer and an explanation of why it is right. In the free 12-question sample, submit your answers to see the correct answers, the explanations and your score, with no account. Exam 1, free with a free account, and every paid exam also show your score by Major Work Activity. These are original practice questions, not real exam questions.

How many questions are on the Ironworker (Generalist) Red Seal exam?

The official Ironworker (Generalist) Red Seal exam has 120 multiple-choice questions. Each question has four options and one correct answer. The writing time is four hours and the pass mark is 70%: at least 84 of 120 questions correct.

What topics are on the Ironworker (Generalist) Red Seal exam?

The published exam breakdown has 6 Major Work Activities (MWAs) or blocks: A, Performs common occupational skills (14 questions); B, Performs rigging, hoisting and positioning, and mobilization, erection, and demobilization of cranes (32 questions); C, Fabricates and installs reinforcing materials (21 questions); D, Performs pre-stressing/post-tensioning (10 questions); E, Performs erection, assembly and installation (31 questions); F, Performs maintenance and upgrading (12 questions).

Can I challenge the Ironworker (Generalist) Red Seal exam without an apprenticeship?

Yes. Experienced workers apply to their provincial or territorial authority as trade qualifiers (challengers in New Brunswick, a Trade Equivalency Assessment in Ontario); once it verifies your documented hands-on hours, you write the same 120-question Red Seal exam as a completing apprentice. Quebec has no challenge exam: where it certifies the trade, experienced workers earn a Quebec certificate first, by recognition of their hours or skills, and then enrol in its Red Seal Program. The federal Ellis Chart lists the hours each authority requires for this trade, from 7,110 in British Columbia to 8,100 in Newfoundland and Labrador (read 2026-10-29); the table on this page shows every province. Buying practice material does not make you eligible; the authority decides.

How do your Ironworker (Generalist) practice exams follow the official breakdown?

Every practice question maps to an MWA and task, and nearly every question maps to a specific subtask. Numbered practice exams match the published question count for each MWA. Mixed exams combine questions from your trade’s numbered exams; their topic distribution can vary.

What are Flashcard Match and Question Match?

Flashcard Match deals a board of Ironworker (Generalist) flashcards on the left and their answers, shuffled, on the right; you match each card to its answer. Question Match does the same with Ironworker (Generalist) practice exam questions. Every round deals a new mix, so there are more than 1,000 different rounds of each.

How many Ironworker (Generalist) practice exams are included?

Pass Your Red Seal includes 4 practice exams and 480 original practice questions for Ironworker (Generalist). Study access includes answers, explanations, practice and timed modes, and results by topic. The practice-bank total covers all available exams; it is separate from the 120 questions on the official exam.

Are Ironworker (Generalist) flashcards included?

Yes. Every Ironworker (Generalist) plan includes 240 flashcards in two exam-weighted sets of 120 cards. Each set follows the Major Work Activity and task question counts of the official Red Seal Occupational Standard - Ironworker (Generalist) (2025) exam breakdown. Review the answer, reasoning, exam trap and standard reference on each card, then use your flashcard score by Major Work Activity to focus your next review.

Can I try Ironworker (Generalist) practice questions for free?

Yes. Try 12 free Ironworker (Generalist) questions without an account or payment. The sample uses the same format as the full exams: answer one question at a time, navigate between questions, submit your answers, and review your score and explanations. Create a free account to take Exam 1, a full practice exam, in every available trade: unlimited retakes, no expiry and no credit card. Review explanations and your score by MWA, and play Question Match with Exam 1’s questions. Exams 2 onward, mixed exams, paid flashcards and full Flashcard Match and Question Match require paid access for that trade.

How much does Ironworker (Generalist) study access cost?

Study access for Ironworker (Generalist) costs $8.99 for 1 month or $14.99 for 12 months. Each plan covers this one trade. Pay once, or choose optional renewal with the 1 month plan: $8.99 for the first month, then $5.99 a month. Stop future renewals in your account.

Challenge the Ironworker (Generalist) exam without an apprenticeship

How it works

Experienced workers in the ironworker trade can write this Red Seal exam as trade qualifiers once their province verifies enough hands-on experience. The hours below are the figures each authority reports to the federal Ellis Chart, read 29 October 2026; the trade’s own form or profile sets the final rule, and each province’s guide has the forms, fees and steps.

Experience required to challenge the Ironworker (Generalist) Red Seal exam
Province or territory, with its guideHours to challengeApprenticeship and certification
British Columbia7,110Apprenticeship 5,400 hours · voluntary certification
AlbertaNo challenge route
SaskatchewanNo challenge route
Manitoba8,100Apprenticeship 5,400 hours · voluntary certification
Ontario
Ironworker - Generalist
8,000Apprenticeship 8,000 hours · voluntary certification
QuebecNot shown
New Brunswick8,100Apprenticeship 5,400 hours · voluntary certification
Nova Scotia8,100Voluntary certification
Prince Edward Island8,100Apprenticeship 5,400 hours · voluntary certification
Newfoundland and Labrador8,100Apprenticeship 5,400 hours · voluntary certification
YukonNot shown
Northwest TerritoriesNo challenge route
NunavutNo challenge route

Source: Ellis Chart, Ironworker (Generalist), published by the Canadian Council of Directors of Apprenticeship. Each authority sets and changes its own rules; confirm the current figure on its page before you apply.