Pass Your Red Seal

How to challenge the Red Seal exam in your province, step by step

Trade qualifier, challenger and equivalency routes in all 13 provinces and territories: who qualifies, the documents, the fees and where to write the exam.

References checked . Confirm application and exam requirements with the responsible authority.

How to use this guide

Certification is provincial, so the experienced-worker route has a different name, different forms and different fees in each province and territory. Find the place where you will live and work, read its summary below, then open its own guide for the documents, the hours your trade needs, the fees, the timeline, exam locations and rewrite rules. Every figure was read on the authority’s own page on the date shown, and the official pages are linked so you can confirm them before you pay or travel.

The exam at the end is the same Red Seal exam everywhere: multiple choice, 100 to 150 questions depending on the trade, four hours, 70% to pass. Our plain-language guide explains the words you will meet along the way.

Compare the routes side by side

Four things differ most between provinces: what the route is called, how much experience the authority wants, what the application costs and how long the decision takes. Fees are in Canadian dollars as published on the date each province was checked; the hours shown are the general rule, and each province’s page lists the hours trade by trade.

Experienced-worker routes to the Red Seal exam, by province and territory
Province or territoryRoute nameExperience requiredApplication feeTime to a decisionExam attempts
British ColumbiaChallenge a certification exam (Trade Qualifier)Set per trade on the Employer Declaration form, with 70% of the job tasks (9,000 hours for Construction Electrician)$120, including the first exam attemptAbout 6 to 8 weeks in compulsory trades, 10 to 12 in others; longer for experience outside CanadaFour within 24 months, 30 days apart; the second is free, the third and fourth $100 each
AlbertaTrades Qualifier – Work Experience programMonths and hours per trade profile, on full-time work (72 months and 9,180 hours for Electrician)$450, non-refundable, including the first theory exam4 to 6 weeks for Canadian experience; 10 to 12 weeks for experience outside CanadaThree at most: $100 for the second; a third only with at least 60% on an attempt and an approved Training Plan
SaskatchewanTrade Qualifier assessment (challenge the journeyperson exam)1.5 × the apprenticeship in years and hours, on a Form 6A per employer (6 years and 10,800 hours for a 4-year, 7,200-hour trade)$400 assessment ($250 for hairstylists trained in Canada); exam $175Not publishedFour for citizens and permanent residents, two for others; three months before the second attempt; upgrading after a third failure
ManitobaTrades Qualification (TQ) programYears and hours per trade profile, with 70% of the trade’s scope (6 years and 10,800 hours for electrician)$200 assessment; $400 examUp to eight weeks after payment and complete documentsRewrite $100 within a year of the previous attempt; approved training after a second failure
OntarioTrade Equivalency Assessment (TEA); applicants are Trade QualifiersHours equal to the trade’s training time, at about 1,800 a year of hands-on work (9,000 for electrician)$235 plus HST assessment; exam $150 plus HSTNot publishedRewrite after 30 days at $150 plus HST each time; no attempt limit published
QuebecRecognition of training and experience, then the Programme du Sceau rougeNo reduced-hours route: the CCQ provincial exam needs experience equal to the whole apprenticeship (8,000 for electrician or plumber, from 4 periods of 2,000)CCQ exam $100; ministry exam $136; Red Seal Program $330 ($352 for CCQ holders)CCQ analysis at least four weeks; ministry not publishedCCQ retake after 3 to 10 months; Red Seal retake $330, proof of upgrading after two failures
New BrunswickTrade Qualification pathway (challenger)Set per trade in Board Order GA001: 10,800 for a 7,200-hour apprenticeship, 8,100 for 5,400$100 challenger assessment; exam $250 ($200 for the Red Seal exam)Not on current pages; a 2009 process document says within 10 working daysRewrite $120; waiting period not published; Learning Strategy referral after two unsuccessful attempts
Nova ScotiaTrade Qualifier (Trade Qualification Program)1.5 × the apprenticeship term, hands-on, with some of it in the last ten years (10,800 for a 7,200-hour trade); a trade’s own regulations can set the figure instead$350, including the exam; a construction-trade waiver was published as running until October 2026Not published; exam applications close about a month before each sittingRewrite $128.85 after 30 days; training or experience required after a second unsuccessful attempt
Prince Edward IslandChallenge the certification exam based on experiencePublished per trade: 1.5 × the PEI apprenticeship term, within the last ten years (10,800 for a 7,200-hour trade)$50 exam fee; no separate application fee publishedNot publishedRewrite $50 after 30 days; a third attempt needs training the Manager approves
Newfoundland and LabradorTrade Qualifier1.5 × the apprenticeship’s on-the-job hours, within the last ten years (10,800 for a 7,200-hour trade)None: application and exam fees eliminated 1 April 2025Not published; you must attempt the exam within six months of approvalFree rewrite after 30 days; a third attempt needs an approved course of study
YukonChallenge the journeyperson Certificate of Qualification exam1.5 × the Yukon apprenticeship hours (9,600 for Plumber, for example)$15, non-refundable; $20 more for a practical exam4 to 6 weeksRebook after one month; a third attempt needs the Director’s approval, then more training
Northwest TerritoriesTrade Qualification (TQ)Apprenticeship term plus one 1,800-hour period (9,000 for a four-period trade)No fee to apply; $200 exam feeNot published; certificates issued within 15 business days of verificationAfter a fail the Director may allow a $50 supplemental exam or direct training or more work experience; no waiting period or attempt limit is set
NunavutTrade Qualification programApprenticeship term plus 1,800 hours (9,000 for a four-level trade)None in the regulations; nothing publishedNot publishedOne supplemental exam after three months if you scored 50% or more; otherwise a program of study first

British Columbia: Challenge a certification exam (Trade Qualifier)

British Columbia lets anyone with extensive experience challenge the certification exam as a Trade Qualifier. The hours and the share of the trade’s job tasks are set on each trade’s Employer Declaration form, 9,000 hours and 70% of tasks for Construction Electrician, 9,450 for Plumber, 9,540 for Carpenter and 6,930 for Welder, and experience from outside Canada counts while foreign training papers are not reviewed. You apply in the SkilledTradesBC Portal with a declaration for every period of work, pay $120 that covers the first exam, and wait while your supervisors are phoned: about six to eight weeks in the compulsory trades and 10 to 12 weeks in the others. Approval lasts 24 months with up to four attempts at least 30 days apart; the second attempt is free and the third and fourth cost $100 each. Exams are written at sessions in 15 cities or at Service BC offices, and in the compulsory Skilled Trades Certification trades an approved Trade Qualifier receives a Temporary Authorization to keep working.

Checked 31 October 2026 on SkilledTradesBC’s own pages.

Alberta: Trades Qualifier – Work Experience program

Alberta’s Trades Qualifier program sets months and hours for each trade on its Tradesecrets profile, counted on full-time work of more than 30 hours a week: 72 months and 9,180 hours for Electrician, 72 months and 9,360 for Plumber or Carpenter, 54 months and 7,020 for Welder or Cook. You apply online in MyTradesecrets, can start before you arrive in Canada, and pay a non-refundable $450 that includes the first theory exam; verification takes four to six weeks for Canadian experience and ten to twelve for experience abroad. After approval you write the theory exam at an Alberta office, prove hands-on competency by an employer declaration, a competency book signed by a journeyperson or, in some trades, a practical exam taken after the theory exam, and finish everything within 18 months; a theory rewrite costs $100. Alberta’s compulsory list has 34 entries, including electrician, plumber, welder and the automotive and heavy equipment technicians, but a submitted application lets you keep doing the restricted work while it is assessed.

Checked 31 October 2026 on Alberta Apprenticeship and Industry Training (Tradesecrets)’s own pages.

Saskatchewan: Trade Qualifier assessment (challenge the journeyperson exam)

Saskatchewan asks for proof of working 1.5 times the apprenticeship, in years and hours, documented employer by employer on a trade-specific Verification of Trade Experience form (Form 6A): 6 years and 10,800 hours for a four-year trade such as carpenter or millwright, 4.5 years and 8,100 for welder or cook. SATCC offers this Trade Qualifier route to experienced workers in non-compulsory trades; in the five compulsory trades, including construction electrician and plumber, it asks applicants to contact its Assessment Unit first. You apply and pay the $400 assessment in the MyATC portal from any province or country, but once approved you need a Saskatchewan address before you can register for the $175 written exam. Regina and Saskatoon sit monthly from February to December and seven other centres four times a year; you need 70% on the written exam before any practical, a second attempt waits three months, and citizens and permanent residents get four attempts, other applicants two.

Checked 31 October 2026 on Saskatchewan Apprenticeship and Trade Certification Commission (SATCC)’s own pages.

Manitoba: Trades Qualification (TQ) program

Manitoba’s Trades Qualification program is for Manitoba residents only, and you must live in the province to write the exam. Each trade profile sets years and hours plus experience in at least 70% of the trade’s scope, by regulation 1.5 times the apprenticeship: six years and 10,800 hours for electrician, plumber or carpenter, 4.5 years and 8,100 for welder or cook, and time as a registered apprentice does not count. The $200 assessment, filed on paper or through AccessManitoba with an Employer Declaration from each employer, takes up to eight weeks; the $400 exam is then written within a year in Winnipeg, Brandon, Thompson or The Pas, with a $100 re-exam and a report by section if you do not pass. Nine trades are compulsory, and carpenters, welders, machinists, bricklayers and the auto body trades also write a practical exam.

Checked 31 October 2026 on Apprenticeship Manitoba’s own pages.

Ontario: Trade Equivalency Assessment (TEA); applicants are Trade Qualifiers

Ontario’s route is the Trade Equivalency Assessment, and Skilled Trades Ontario calls its applicants Trade Qualifiers. You need competency in the trade’s Training Standard and experience at least equal to the trade’s training time, counted at about 1,800 hours a year of hands-on work: 9,000 hours for electrician, plumber, steamfitter, sheet metal worker or refrigeration mechanic, 7,200 for carpenter, 6,000 for welder or cook. Experience from outside Canada counts, verified by references on a form or letter. The assessment costs $235 plus HST and the exam $150 plus HST for each attempt, a rewrite waits 30 days, and exams are written in English or French at 24 centres across Ontario, with results in the portal within 15 business days. Twenty-three trades are compulsory, so an electrician, plumber or automotive technician needs the Certificate of Qualification, a provisional certificate or a training agreement to work.

Checked 31 October 2026 on Skilled Trades Ontario’s own pages.

Quebec: Recognition of training and experience, then the Programme du Sceau rouge

Quebec works differently from every other province: there is no route to the Red Seal exam on experience alone. Construction trades go through the Commission de la construction du Québec, which recognizes paid, trade-related hours equal to 100% of the apprenticeship (8,000 for electricians and plumbers, 6,000 for carpenters) and then admits you to its own provincial qualification exam and journeyperson competency certificate. Regulated trades outside construction, such as electricity, plumbing and refrigeration, go through the ministry’s qualification certificates, where experience can shorten the apprenticeship, waive training or, in some trades, lead straight to the certificate. Only then do you enrol in the Programme du Sceau rouge for $330 ($352 for CCQ-certified workers) and write the Red Seal exam at the ministry’s centre. Automotive Service Technician, Truck and Transport Mechanic and eleven other trades have no Red Seal route in Quebec at all.

Checked 31 October 2026 on Commission de la construction du Québec (construction trades) and the Ministère de l’Emploi et de la Solidarité sociale (regulated trades outside construction and the Red Seal Program)’s own pages.

New Brunswick: Trade Qualification pathway (challenger)

New Brunswick’s Act calls an experienced worker who writes the certification exam without an apprenticeship a challenger. Board Order GA001 sets the hours trade by trade, 1.5 times the apprenticeship in practice: 10,800 for a four-year trade such as electrician, plumber or carpenter and 8,100 for welder and cook, with at least 20% of them gained in the six years before you apply. You pay a $100 challenger assessment, then register for the exam and pay its fee ($250 for the certificate of qualification exam, with the Red Seal exam listed at $200); the pass mark is 70% and a mark stays valid for six years. Twelve occupations are compulsory, so an electrician, plumber or automotive service technician needs a certificate, work permit or registration before working for pay. Since 1 September 2026 a person holding an equivalent certificate from another province or territory is deemed to hold a New Brunswick certificate, with no equivalency fee; the Director can recognize a credential in whole or in part and attach conditions.

Checked 31 October 2026 on Skilled Trades NB (Apprenticeship and Occupational Certification)’s own pages.

Nova Scotia: Trade Qualifier (Trade Qualification Program)

Nova Scotia’s Trade Qualifier route starts with an Industry Training Consultant, who reviews your employer letters, references and identification at an interview before signing your application. The regulations ask for hands-on work in the trade totalling at least 1.5 times the apprenticeship term, with some of it in the ten years before you apply: 10,800 hours for electrician, plumber, carpenter or millwright, 8,100 for welder, cook or baker. The Trade Qualifier fee was cut to $350 in October 2025 and includes the exam; a fee waiver for construction-trade applicants was published as running until October 2026, and no extension was announced as of 31 October 2026. Since January 2026 every application runs through the Apprenticeship Management System; exams are written mostly on Saturdays at NSCC campuses, certification needs 70%, results are mailed within 10 working days with a breakdown by section, and a rewrite waits at least 30 days. Thirteen trades are compulsory certified, and a trade qualifier in one of them can hold a temporary permit of up to three months to keep working.

Checked 31 October 2026 on Nova Scotia Apprenticeship Agency’s own pages.

Prince Edward Island: Challenge the certification exam based on experience

Prince Edward Island publishes the challenger hours for every designated trade on its Designated Trades page: 10,800 in the trades with a 7,200-hour PEI apprenticeship, such as electrician, plumber, carpenter and automotive service technician; 8,100 in the 5,400-hour trades, such as welder, cook and boilermaker; and 6,000 to 10,000 in trades with no PEI apprenticeship. The rule behind the table sits in the regulations: 1.5 times the apprenticeship term, worked since age 16 and within the ten years before you apply. The exam fee is $50, a rewrite waits 30 days and costs $50 again, and a third attempt needs training the Manager of Apprenticeship approves. Four trades are compulsory certified. Ask the Apprenticeship Section for the current application form: older forms still online print hours from before the current rule.

Checked 31 October 2026 on Apprenticeship Section, Government of Prince Edward Island’s own pages.

Newfoundland and Labrador: Trade Qualifier

Newfoundland and Labrador charges nothing to challenge: the $50 Trade Qualifier application fee and the $200 exam fee were both eliminated on 1 April 2025. You need at least 1.5 times the apprenticeship’s on-the-job hours within the last ten years, verified employer by employer on a Record of Work Experiences form whose skills checklist a certified journeyperson signs; the February 2026 application prints the hours, 10,800 for electrician, plumber, carpenter and millwright and 8,100 for welder, cook and baker. No in-school training is required. Once approved you must attempt the exam within six months, at roughly monthly sittings in six regional offices; cooks, welders, hairstylists and machinists pass a practical exam first. Results come in about ten business days, a rewrite waits at least 30 days, and only five trades are compulsory.

Checked 31 October 2026 on Apprenticeship and Trades Certification Division (ATCD)’s own pages.

Yukon: Challenge the journeyperson Certificate of Qualification exam

Yukon’s route is the simplest in Canada to describe: work 1.5 times the hours of the Yukon apprenticeship in your trade, have each employer sign a Trade Experience Verification form, and pay $15. The office verifies your experience in four to six weeks, exams are written monthly at the Department of Education building in Whitehorse, and hairstylists and welders also take a $20 practical exam. If you do not pass you may rebook at once but must wait a month, and a third attempt needs the Director of Apprenticeship’s approval. Yukon publishes no compulsory-trade list, but electricians, gasfitters and oil burner mechanics are licensed through the Building Safety Branch and may need the Certificate of Qualification for that licence.

Checked 31 October 2026 on Government of Yukon, Apprenticeship and Trade Certification’s own pages.

Northwest Territories: Trade Qualification (TQ)

The Northwest Territories calls its experienced-worker route Trade Qualification. There is no fee to apply: you submit the Trade Qualification and Designated Trainer Application with a trade-specific Verification of Trade Competence form signed by your supervising journeyperson, your certificates and a résumé to your local ECE Service Centre. The hours are printed on the form as the apprenticeship term plus one 1,800-hour period: 9,000 for a four-period trade such as electrician or plumber, 7,200 for a three-period trade such as welder or cook. A certification officer decides whether you get work-experience credit, need technical training or must write the $200 Qualification Examination. If you fail, the Director may allow a $50 supplemental exam or direct more training or work experience first. No trade is compulsory in the NWT.

Checked 31 October 2026 on Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification’s own pages.

Nunavut: Trade Qualification program

Nunavut’s Trade Qualification program is for experienced trade workers who want to be certified while they work in Nunavut, and the government’s page sends you to your regional Career Development Officer for the details. The regulations set the experience at the term of the apprenticeship plus 1,800 hours, with enough variety across the trade to show competence: 9,000 hours for a four-level trade such as electrician or plumber, 7,200 for a three-level trade such as welder or cook. The 2018 amendment both enacts and repeals a 70% pass mark, so confirm the pass mark with the Apprenticeship Certification Unit; a failed first attempt with at least 50% earns one supplemental exam after three months, and anything lower means a program of study first. No fee appears in the regulations, no trade is compulsory, and the 2021 Act that would change the rules is still not in force.

Checked 31 October 2026 on Department of Family Services — Nunavut Apprenticeship Certification Unit’s own pages.

Common questions

Which province should I apply in?

The one where you will live and work. Certification is issued provincially; the Red Seal endorsement then makes it recognized across Canada. Applying in a province you will not work in rarely saves time, because that province’s compulsory-trade rules and exam locations will not apply to you.

Do all provinces let experienced workers challenge the exam?

Every province and territory has a route for experienced workers, though not in every trade, and the required hours, scope of experience, documents, interviews or practical assessments and fees differ. Quebec has no challenge exam: experienced workers earn a Quebec certificate first, through the CCQ’s provincial exam once their hours equal 100% of the apprenticeship in a construction trade, or through the ministry’s recognition of experience in its regulated trades, then enrol in its Red Seal Program. Read the section for your province and confirm the current rules on the linked official page.

Can I apply from outside Canada?

Some authorities accept applications and documents from abroad; others want you in the province first or want proof you may work in Canada. Each section states what the authority publishes about this. Immigration and work permits are separate from trade certification.

What if my trade is compulsory where I am moving?

You must be a registered apprentice or hold the certificate before working for pay in that trade there. Treat the application as your first task after arrival and check whether the authority offers a provisional or temporary certificate while your assessment is in progress.

Are fees the same everywhere?

No. Each authority sets and publishes its own application, assessment and exam fees, and changes them from time to time. The figures in this guide carry the date they were read; the linked page is current.