Pass Your Red Seal

How to challenge the Red Seal exam in Manitoba: hours and fees

How Manitoba’s Trades Qualification program works: years and hours by trade, 70% of the trade’s scope, the $200 and $400 fees, four exam cities and rewrites.

Who decides
Apprenticeship Manitoba
What the route is called
Trades Qualification (TQ) program
Experience required
Years and hours per trade profile, with 70% of the trade’s scope (6 years and 10,800 hours for electrician)
Application fee
$200 assessment; $400 exam
Time to a decision
Up to eight weeks after payment and complete documents
Exam attempts
Rewrite $100 within a year of the previous attempt; approved training after a second failure
The exam
The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.

References checked . Confirm application and exam requirements with the responsible authority.

Who can challenge the Red Seal exam in Manitoba

The Trades Qualification program is only available to Manitoba residents, and you must reside in Manitoba to challenge a Red Seal, provincial or practical certification exam. Each trade profile states a minimum number of years and hours in the trade plus experience in at least 70% of the trade’s scope; by regulation the rule is employment for 1.5 times the term of apprenticeship. Construction Electrician, Industrial Electrician, Plumber, Sheet Metal Worker, Carpenter, Heavy Duty Equipment Technician, Automotive Service Technician, Truck and Transport Mechanic, Machinist and Glazier need 6 years and 10,800 hours; Steamfitter-Pipefitter 7.5 years and 13,500; Millwright, Instrumentation Technician and Cabinetmaker 6 years and 9,600; Welder, Cook, Baker, Parts Technician, Boilermaker and Bricklayer 4.5 years and 8,100; Hairstylist and Gasfitter Class B 3 years and 5,400. Time as a registered apprentice does not count, because apprentice hours are training.

Credentials earned outside Manitoba or outside Canada are submitted as copies with the application, translated into English or French; send copies only, because originals cannot be returned. You must live in Manitoba when you apply, whether as an apprentice or a trade qualifier, so this is not a route to start from abroad.

Hours required by trade in Manitoba

These are the experience figures Apprenticeship Manitoba publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.

Unless a trade’s note says otherwise:

  • Published on the trade profile, with experience in at least 70% of the trade’s scope
Experience needed to challenge the Red Seal exam in Manitoba, by trade
TradeExperience requiredNotes
Agricultural Equipment Technician10,800 (6 years)
Auto Body and Collision Technician10,800 (6 years)Practical exam for trade qualifiers
Automotive Refinishing Technician7,200 (3 years)Practical exam for trade qualifiers
Automotive Service Technician10,800 (6 years)
Baker8,100 (4.5 years)No apprenticeship program is offered, so trade qualification is the only route
Boilermaker8,100 (4.5 years)
Bricklayer8,100 (4.5 years)Practical exam for trade qualifiers
Cabinetmaker9,600 (6 years)
Carpenter10,800 (6 years)Practical exam for trade qualifiers
Concrete Finisher5,400 (3 years)
Construction Craft Worker5,400 (3 years)
Construction Electrician (compulsory)10,800 (6 years)An Inspection and Technical Services licence is needed after certification
Cook8,100 (4.5 years)
Domestic Gasfitter (Class B)5,400 (3 years)An Inspection and Technical Services Domestic (B) licence is needed after certification
Floorcovering Installer6,300 (4.5 years)
Gasfitter (Class A)10,800 (6 years)An Inspection and Technical Services Commercial (A) licence is needed after certification
Glazier10,800 (6 years)
Hairstylist (compulsory)5,400 (3 years)Practical exam; a temporary permit is mailed to approved trade qualifiers
Heavy Duty Equipment Technician10,800 (6 years)
Industrial Electrician (compulsory)10,800 (6 years)An Inspection and Technical Services licence is needed after certification
Industrial Mechanic (Millwright)9,600 (6 years)
Instrumentation and Control Technician9,600 (6 years)
Insulator (Heat and Frost)10,800 (6 years)
Ironworker (Generalist)8,100 (4.5 years)
Landscape Horticulturist9,000 (6 years)
Lather (Interior Systems Mechanic)8,100 (4.5 years)
Machinist10,800 (6 years)Practical exam for trade qualifiers
Mobile Crane Operator (compulsory)7,650 (4.5 years)The Ellis Chart shows 8,100
Painter and Decorator8,100 (4.5 years)
Parts Technician8,100 (4.5 years)
Plumber10,800 (6 years)
Powerline Technician10,800 (6 years)No apprenticeship program is currently available
Recreation Vehicle Service Technician7,200 (4.5 years)
Refrigeration and Air Conditioning Mechanic (Commercial) (compulsory)10,800 (6 years)The provincial Residential stream is 4.5 years and 8,100 hours
Roofer8,100 (4.5 years)
Sheet Metal Worker10,800 (6 years)
Sprinkler Fitter (compulsory)10,200 (6 years)
Steamfitter-Pipefitter (compulsory)13,500 (7.5 years)
Tool and Die Maker10,800 (6 years)Practical exam for trade qualifiers
Tower Crane Operator (compulsory)4,500 (3 years)
Transport Trailer Technician8,100 (4.5 years)
Truck and Transport Mechanic10,800 (6 years)
Welder8,100 (4.5 years)Practical exam for trade qualifiers

Documents and forms you need

Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Apprenticeship Manitoba uses.

  • The Trades Qualification Application, on paper or online through AccessManitoba, with the $200 non-refundable fee. The paper form (revised June 2026) takes Visa or MasterCard, a cheque or money order payable to the Minister of Finance, or cash or debit in person, and says not to mail cash; the apply page names Apprenticeship Manitoba as the cheque payee. Incomplete applications are returned by mail.
  • An Employer Declaration of on-the-job work experience for your trade from each direct supervisor, current and past; the trade-specific forms are linked on each trade profile. A non-self-employed applicant must provide at least one Employer Declaration.
  • A Statutory Declaration of on-the-job work experience, or the trade’s work experience form with two references, only for self-employment or an employer that has closed.
  • Copies of all trade-related certificates and credentials, including a certificate of qualification in any other trade and those earned out of province or outside Canada, translated into English or French; originals cannot be returned. On request, T4 slips, records of employment, invoices, tax documents or company financial statements.
  • After approval, the Trades Qualification Certification Exam Application form and schedule, which are emailed and not posted online, and an Exam Accommodation Request with a letter from a qualified professional at least a month before the exam if you need one.

How to apply in Manitoba, step by step

The steps follow the order Apprenticeship Manitoba describes.

  1. Check your trade profile for the years, hours and scope requirement and download its Employer Declaration form.
  2. Submit the Trades Qualification application with the $200 non-refundable assessment fee, an Employer Declaration from each employer and copies of your credentials, translated into English or French where needed, on paper or through AccessManitoba. Incomplete applications are returned by mail. A Statutory Declaration is accepted only for self-employment or a company that has closed.
  3. Wait up to eight weeks after payment and complete documents are received. The Trades Qualification Assessor may interview you or ask for T4s, records of employment, invoices, tax documents or financial statements.
  4. If approved you are a trade qualifier and receive the exam application form and schedule by email. You have one year to register for and write the certification exam, and any practical exam your trade requires; after that you must reapply and pay again.
  5. Send the exam application, any accommodation request at least a month ahead and the $400 exam fee, then write the four-hour multiple-choice exam in Winnipeg, Brandon, Thompson or The Pas. The pass mark is 70%, and you receive a trade exam report showing how you did in each section.
  6. If you do not pass, a second attempt can be rescheduled within one year of the previous attempt without reapplying, for the $100 re-exam fee; after a second unsuccessful attempt, approved additional training is required before a third exam.

What it costs in Manitoba

Fees as published on 31 October 2026 on the certification exams page, on the Trades Qualification Application form (revised June 2026) and in the September 2025 guide: $200 Trades Qualification application fee, non-refundable; $400 certification exam fee; $100 re-exam fee for trade qualifiers. The application form takes Visa or MasterCard, a cheque or money order payable to the Minister of Finance, or cash or debit in person; the apply page names Apprenticeship Manitoba as the cheque payee. Post-dated cheques are not accepted, and a returned cheque costs $20. The practical exam fee is not published, and the cost of an interpreter, reader or dictionary for an accommodated exam is borne by the candidate. No fee is published for certificate recognition or temporary permits.

How long it takes

Plan around these published timelines; they start when the authority has a complete application.

  • Assessment takes up to eight weeks after payment and receipt of all documents; approval arrives by email.
  • An approval is valid for one year: you must register for and write the certification exam, and any practical exam, within a year or reapply, pay the fees and resubmit your documents.
  • The exam application form and schedule are emailed after approval; accommodation requests must be submitted at least one month before the exam. A second attempt may be rescheduled within one year of the previous attempt without reapplying.
  • Results come with a trade exam report by section; release timing is not published. A pass leads to a Certificate of Qualification and journeyperson status.

Writing the Red Seal exam in Manitoba

Where and how the exam is written, and what to bring.

  • Trade qualifier exams are written at 111 Lombard Avenue in Winnipeg, 340 9th Street in Brandon, 118-3 Station Road in Thompson and 305 4th Street West in The Pas; accommodated and rescheduled exams can also be written at designated locations across Manitoba.
  • The exam is four hours of multiple-choice questions covering all apprenticeship levels, with a 70% pass mark. The certification exams page does not say whether it is on paper or computer or what identification to bring; Apprenticeship Manitoba’s Provincial Exam Preparation Guide (December 2024) describes a paper exam, an exam booklet answered on a bubble sheet with the pencil, eraser and calculator supplied, and its checklist includes government-issued photo ID.
  • Accommodations, with a letter from a qualified professional: an interpreter or reader you bring, who cannot work or be certified in your trade and cannot assist with the same exam more than once in 90 days, with one extra hour for you; a printed language dictionary that provides translation, not electronic and not trade-specific; extra time; a private sitting; a modified format for visual impairment. Requests go in at least a month ahead, costs are not reimbursed, and a new form is needed for each retake.
  • Trade qualifiers who also write a practical exam after passing the written one: Auto Body and Collision Technician, Automotive Refinishing Technician, Bricklayer, Carpenter, Electrologist, Esthetician, Hairstylist, Machinist, Tool and Die Maker and Welder.

If you do not pass

Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.

  • Below 70% you may rewrite: the second attempt is rescheduled within one year of the previous attempt without reapplying, with a new exam application and the $100 re-exam fee. No minimum waiting period is published. If you do not reschedule within 12 months of a failed exam, section 29 of the regulation requires a new Trades Qualification application, with its $200 fee.
  • After a second unsuccessful attempt, approved additional training, such as upgrading in reading or mathematics decided case by case, is required before a third exam. A third or fourth attempt needs a new exam application and the $100 re-exam fee; no overall limit is published, and you may instead challenge a level test and enter the apprenticeship program.
  • The results come with a trade exam report showing how you did in each section. A trade qualifier who believes the rules were applied incorrectly may appeal to the Apprenticeship and Certification Appeal Board.

Compulsory trades in Manitoba

Nine Manitoba trades are compulsory certification trades: Construction Electrician, Industrial Electrician, Refrigeration and Air Conditioning Mechanic, Steamfitter-Pipefitter, Sprinkler Fitter, Hairstylist, Esthetician, Electrologist and the Crane and Boom Truck Operator trades. To work in them you must be a registered apprentice or a certified journeyperson. Electrologist is being removed: in August 2026 the province announced its de-designation, with interim exemption permits available until the regulation changes. Plumber, gasfitter, sheet metal worker, automotive, heavy duty, welder, carpenter, cook and baker are voluntary.

Applying from outside Canada or as a newcomer

What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.

  • You cannot start from abroad: the Trades Qualification program is only for Manitoba residents, and you must live in Manitoba when you apply and when you write.
  • Experience gained outside Canada is assessed through the same Employer or Statutory Declarations and supporting tax or employment records. Copies of credentials earned outside Canada go in with the application and must be translated into English or French; originals cannot be returned.
  • If English or French is not your first language, the exam accommodations include an interpreter or reader you bring and a printed language dictionary that provides translation; Workplace Education Manitoba and Manitoba Start are referenced for language and essential-skills support.
  • Successful trade qualifiers in Hairstylist, Esthetician, Skin Care Technician and Nail Care Technician are mailed a temporary permit to work until they write; no temporary permit is published for the other compulsory trades.

If you are already certified elsewhere in Canada

A trade certified by another province’s or territory’s regulator is recognized under the Canadian Free Trade Agreement. In a compulsory trade you file the Certificate Recognition Form with copies of your credentials and, on approval, receive a letter of recognition to work in Manitoba; in a voluntary trade no step is needed. Red Seal certification in any trade continues to be recognized, and a non-Red Seal certificate in a compulsory trade is assessed case by case.

Good to know

Details that catch people out.

  • Electricians need a separate licence from Manitoba’s Inspection and Technical Services after the Certificate of Qualification, as do gasfitters (a Commercial A or Domestic B licence).
  • Metal Fabricator, Tilesetter, Drywall Finisher and Plasterer, the Heavy Equipment Operator trades, Appliance Service Technician, Motorcycle Technician and Oil Heat System Technician are not among Manitoba’s 54 trade profiles, so there is no Manitoba challenge route for them. The Trades Qualification Assessor is reached at TradesQ@gov.mb.ca or 204-945-3337 (toll-free 1-877-978-7233).

Words Apprenticeship Manitoba uses

Trades Qualification; trade qualifier; experienced tradespersons; Employer Declaration; Statutory Declaration; Certificate of Qualification; temporary permit; AccessManitoba. The plain-language guide connects these to the words other provinces and tradespeople use.

Prepare for the exam

Once Apprenticeship Manitoba approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.

Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.

Other provinces and territories

Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.

Common questions

How many hours do I need to challenge the Red Seal exam in Manitoba?

The years and hours on your trade profile, with experience in at least 70% of the trade’s scope: 6 years and 10,800 hours for electrician, plumber, sheet metal worker, carpenter, heavy duty equipment technician, automotive service technician, truck and transport mechanic, machinist and glazier; 7.5 years and 13,500 for steamfitter-pipefitter; 6 years and 9,600 for millwright, instrumentation technician and cabinetmaker; 4.5 years and 8,100 for welder, cook, baker, parts technician, boilermaker and bricklayer; 3 years and 5,400 for hairstylist and gasfitter class B. Apprentice hours do not count.

What does Trades Qualification cost in Manitoba?

$200 for the application, non-refundable, then $400 for the certification exam, so $600 for a first attempt. A re-exam costs $100. The practical exam fee is not published. The paper application form takes Visa or MasterCard, a cheque or money order payable to the Minister of Finance, or cash or debit in person; the apply page names Apprenticeship Manitoba as the cheque payee.

Do I have to live in Manitoba?

Yes. The Trades Qualification program is only for Manitoba residents, and you must reside in Manitoba to challenge a Red Seal, provincial or practical exam. Newcomers must live in Manitoba when they apply, and copies of credentials from outside Canada must be translated into English or French.

How long does Manitoba take, and how long is the approval good for?

Assessment takes up to eight weeks after payment and complete documents. Approval lasts one year: register for and write the exam, and any practical, within that year or reapply and pay again.

Where do trade qualifiers write the exam in Manitoba?

At 111 Lombard Avenue in Winnipeg, 340 9th Street in Brandon, 118-3 Station Road in Thompson or 305 4th Street West in The Pas. The exam is four hours of multiple-choice questions with a 70% pass mark, and the schedule is emailed after approval.

Which trades need a practical exam in Manitoba?

Trade qualifiers in Auto Body and Collision Technician, Automotive Refinishing Technician, Bricklayer, Carpenter, Electrologist, Esthetician, Hairstylist, Machinist, Tool and Die Maker and Welder write a practical exam after passing the written one.

What happens if I fail the exam in Manitoba?

You receive a trade exam report by section and may rewrite within one year of the previous attempt without reapplying: send a new exam application and the $100 re-exam fee. After a second unsuccessful attempt, approved additional training is required before a third exam, and each later attempt again needs a new exam application and the $100 fee. If you do not reschedule within 12 months of a failed exam, the regulation requires a new Trades Qualification application and its $200 fee.