Pass Your Red Seal
Exams

Online Red Seal Exam Preparation, built on official standards

only $14.99

  • Full trade access
  • 12 months
Unlock full access

Pay once, good for a full year.

Recreation Vehicle Service Technician

Built on official standards for your trade

Practice exams split like the real exam.
Every answer explained.

only $14.99

  • Full trade access
  • 12 months
Unlock full access

Pay once, good for a full year.

4
Practice exams
480
Questions
240
Flashcards
1,000+
Flashcard Match
50+
Trade math
100+
Simulations
Try Recreation Vehicle Service Technician free12 sample questions now, or Exam 1 with a free account12 sample questionsFree Exam 1

Practice exams

4 exams · 120 questions each

Exam 1 is free. Create a free account and retake it as often as you like, with no expiry. How it works

4 practice exams and 480 original practice questions with answers and explanations, plus 240 flashcards in two exam-weighted sets, for the 120-question Recreation Vehicle Service Technician Red Seal exam. Timed or untimed, with pause and resume. 120 questions in the real exam · 4 hours · 70% pass mark.

Recreation Vehicle Service Technician sample exam questions

Take them as an exam

12 free practice questions with answers and explanations. No account needed.

Sample 1 Recreation Vehicle Service Technician, free sample

A fitting requires 18 ft·lb. Four torque wrenches have current calibration records and the following certified ranges. Which range includes the required setting?

Answer A certified range from 10 to 50 ft·lb for the required setting
Why Eighteen falls inside 10–50 ft·lb and below the lower limit of each other listed range. Drive size or a readable scale below the certified range does not establish accuracy there. Select the appropriate tool, units, adapters and operating method for the fitting. A current certified range is the criterion; torque wrenches are not universally accurate only at the middle of their scale.
2. The winterizing sheets specify discarding the used disposable water-filter cartridge and draining the external regulator before dry indoor storage. Which plan satisfies those instructions?
Answer Discard the used cartridge and drain the regulator before storing it indoors
Why The cartridge is designated for disposal, and the regulator has a separate drain-and-storage requirement. Retaining the cartridge omits replacement; storing a wet regulator omits draining even if the storage location is indoors. The last plan omits both. Follow the actual filter and regulator instructions for winterizing; activated carbon’s removal of chlorine does not mean chlorine universally destroys carbon media.
3. An RV shore-cord equipment-ground test is performed with the cord disconnected at both ends and all conductors isolated. The ground-pin-to-ground-contact reading is open, while each power conductor passes its end-to-end check. Where is the measured defect?
Answer In the disconnected cord’s equipment-ground wire or its end connections
Why The failed test spans only the cord ground conductor and its terminations, so inspect that path. Passing power-conductor checks do not repair the separate ground path. The RV chassis is outside the disconnected test and cannot explain this measured open. Live voltage readings alone do not localize or prove continuity of an equipment-ground conductor; isolate and test the intended segment using the approved procedure.
4. All RV AC sources are disconnected, possible backfeeds isolated and absence of voltage verified. The service procedure calls for a low-resistance check of the inlet equipment-ground bond to the chassis. Which two points define that measurement?
Answer The inlet equipment-ground terminal and the chassis bonding point
Why Measure between the two ends of the specified bonding segment: inlet equipment ground and chassis bonding point. Neutral-to-chassis examines a different relationship and can conceal an unwanted downstream bond. Either measurement to the hot terminal tests a different path. Use the prescribed instrument, lead compensation and acceptance limit; a continuity beep alone does not certify the entire installation or fault-current performance.
5. Two compatible 12 V, 100 Ah batteries are approved for a parallel house bank. Ignoring losses and rate effects, what nominal bank voltage and capacity result from connecting positive to positive and negative to negative?
Answer 12 V and 200 Ah, retaining voltage while combining battery capacity
Why Parallel connection retains 12 V and adds the nominal capacities to 200 Ah under the stated assumptions. The 24 V/100 Ah result describes a series arrangement. The 12 V/100 Ah choice omits the added capacity, while 24 V/200 Ah incorrectly adds both quantities. Complete the installation using the approved conductors, protection and current-sharing arrangement; parallel connection alone does not guarantee equal current sharing.
6. During an RV gas-system pressure-hold test, the specified isolated test section and instrument have stabilized. The applicable procedure permits no pressure loss over its timed interval, but the reading steadily falls. What should be recorded?
Answer A failed pressure-hold result; investigate the tested system before its release
Why The measured loss fails the supplied acceptance criterion. Reaching the starting pressure does not establish holding performance, and the procedure permits no working-seepage allowance. The loss requires investigation of the tested system and test connections; it does not by itself identify a regulator defect, particularly if the regulator is outside the isolated section. Use the actual applicable procedure for pressure, duration, isolation and safe testing.
7. A flame-sensing cooktop burner keeps re-sparking. The approved checks show the required flame contact and electrode insulation are satisfactory, but burner-to-module ground resistance exceeds the manual limit. What should be corrected first?
Answer The measured high-resistance flame-sensing ground path before another function test
Why The measured ground-path defect can interrupt flame-sense current and should be corrected and retested. Altering verified electrode position or insulation leaves that defect unresolved. Normal operation of other burners does not prove every channel of a shared module is sound, but it also does not justify replacing the module before addressing the localized ground result. Use the model-specific flame-sense procedure.
8. One burner will not ignite from its spark. During the approved test, a visible discharge tracks through a crack in that electrode’s ceramic to the grounded base instead of crossing the specified spark gap. What repair addresses the observed fault?
Answer Replace the damaged electrode assembly and verify the prescribed spark path
Why The crack provides the observed unintended discharge path, so replace the damaged assembly and verify correct ignition. Moving a sound cap or widening the intended gap does not restore insulation. Replacing the module leaves the visible leakage path in place. An audible click alone does not establish a good spark at every burner, and another burner working does not prove all shared-module outputs are sound.
9. A DSI water-heater procedure requires at least 11.5 V across the gas valve during its ignition trial. The battery remains at 12.4 V, but the valve receives 10.8 V and does not open. What should be checked before condemning the valve?
Answer Loaded voltage drops in the valve supply and return paths
Why The valve is being tested below its specified operating voltage, so locate the loaded supply and return drops first. An unloaded continuity test can miss resistance that produces a substantial drop under current. Electrode gap and burner cleanliness concern ignition or combustion but do not correct the measured electrical deficiency. Voltage merely being present does not prove adequate delivery or a sound control-board output.
10. A manually adjusted trailer brake’s service sheet calls for tightening while rotating until the shoes hold the drum, then backing off until the specified slight drag is obtained. Which endpoint follows that procedure?
Answer A rotating drum with the specified slight drag after the initial seating step
Why The specified final slight drag controls the endpoint after seating and backing off. A fixed click count with no resistance does not establish that condition. A locked or heavily dragging drum has not reached the prescribed final clearance. Follow the actual brake model’s adjustment method and complete its checks; manual and self-adjusting systems can differ, and a universal ten-click rule is not reliable.
11. A levelling-system sheet requires all jacks retracted for the reservoir-level check and specifies product R on cleaned exposed rods. Which service meets both conditions?
Answer Check fluid with jacks retracted and use product R on the cleaned rods
Why The sheet defines both the fluid-check configuration and the approved rod treatment. Extended cylinders can retain fluid outside the reservoir and change the level reading. Chassis grease is not the specified treatment; compatibility and dirt retention must be considered. The final alternative changes both conditions. Use the actual model’s requirements because rod treatments and reservoir-check arrangements are not universal.
12. A folding-trailer roof is uneven. With the roof supported by the specified independent supports and cable tension safely released, one corner pulley cannot turn; cable routing and adjustment checks pass. What repair addresses the measured defect?
Answer Repair the seized pulley by the approved method and verify the complete lift travel
Why The seized pulley is directly observed, so correct it and inspect associated cable wear before verifying travel. Either cable-length change alters a passing adjustment and leaves the binding component. Replacing the winch also leaves that local fault. A low corner alone could have several causes; independent support, energy control and the supplied inspection are essential before selecting this repair.

Start free

Interactive simulations

Animated simulations built for Red Seal trades. See inside pumps, transmissions, air brakes, gears and heavy machinery, watch every part move, and interact with each one as it runs.

Diagrams and symbols

Learn to read the diagrams and schematic symbols used in your trade.

How things work

Animated section drawings show what happens inside the equipment as it runs.

Terminology

Learn the correct name and job of every part.

Exam breakdown

Red Seal practice tests and exam prep

The official Recreation Vehicle Service Technician Red Seal exam, also called the interprovincial (IP) exam, has 120 questions across 8 topic blocks. Open a block to see its tasks and subtasks.

120
Multiple choice questions
4 hours
Writing time
70%
Pass mark
Major Work Activity% of examReal examPractice bank
ACommon occupational skills8%1040

A-1 · Performs safety-related activities

2 official exam questions · 8 in the practice bank

  • A-1.01 Uses personal protective equipment (PPE) and safety equipment
  • A-1.02 Maintains safe work environment

A-2 · Uses and maintains tools and equipment

3 official exam questions · 10 in the practice bank

  • A-2.01 Uses tools and equipment
  • A-2.02 Uses lifting, moving and access equipment

A-3 · Performs common work practices and procedures

3 official exam questions · 14 in the practice bank

  • A-3.01 Uses documentation
  • A-3.02 Identifies recalls and service bulletins
  • A-3.03 Performs pre-delivery inspections (PDI)

A-4 · Uses communication and mentoring techniques

2 official exam questions · 8 in the practice bank

  • A-4.01 Uses communication techniques
  • A-4.02 Uses mentoring techniques
BPlumbing systems14%1768

B-5 · Diagnoses plumbing systems

7 official exam questions · 20 in the practice bank

  • B-5.01 Diagnoses potable water systems
  • B-5.02 Diagnoses waste water systems

B-6 · Services potable water systems

5 official exam questions · 24 in the practice bank

  • B-6.01 Maintains potable water systems
  • B-6.02 Repairs potable water systems
  • B-6.03 Installs potable water systems

B-7 · Services waste water systems

5 official exam questions · 24 in the practice bank

  • B-7.01 Maintains waste water systems
  • B-7.02 Repairs waste water systems
  • B-7.03 Installs waste water systems
CElectrical systems19%2288

C-8 · Diagnoses electrical systems

8 official exam questions · 32 in the practice bank

  • C-8.01 Diagnoses AC electrical systems
  • C-8.02 Diagnoses DC electrical systems
  • C-8.03 Diagnoses generators

C-9 · Services AC electrical system

6 official exam questions · 24 in the practice bank

  • C-9.01 Maintains AC electrical systems
  • C-9.02 Repairs AC electrical systems
  • C-9.03 Installs AC electrical systems

C-10 · Services DC electrical system

6 official exam questions · 24 in the practice bank

  • C-10.01 Maintains DC electrical systems
  • C-10.02 Repairs DC electrical systems
  • C-10.03 Installs DC electrical systems

C-11 · Services generators

2 official exam questions · 8 in the practice bank

  • C-11.01 Maintains generators
  • C-11.02 Installs generators
DLP gas systems15%1872

D-12 · Diagnoses LP gas systems

10 official exam questions · 32 in the practice bank

  • D-12.01 Diagnoses LP gas supply systems (high pressure)
  • D-12.02 Diagnoses LP gas distribution systems (low pressure)

D-13 · Services LP gas systems

8 official exam questions · 40 in the practice bank

  • D-13.01 Maintains LP gas systems
  • D-13.02 Repairs LP gas systems
  • D-13.03 Installs LP gas systems
EAppliances and consumer products15%1872

E-14 · Diagnoses appliances

5 official exam questions · 23 in the practice bank

  • E-14.01 Diagnoses water heaters
  • E-14.02 Diagnoses furnaces
  • E-14.03 Diagnoses cooktops and ranges
  • E-14.04 Diagnoses refrigerators and ice makers
  • E-14.05 Diagnoses air conditioners and heat pumps

E-15 · Services water heaters

2 official exam questions · 9 in the practice bank

  • E-15.01 Maintains water heaters
  • E-15.02 Repairs water heaters
  • E-15.03 Installs water heaters

E-16 · Services furnaces

3 official exam questions · 9 in the practice bank

  • E-16.01 Maintains furnaces
  • E-16.02 Repairs furnaces
  • E-16.03 Installs furnaces

E-17 · Services cooktops and ranges

2 official exam questions · 9 in the practice bank

  • E-17.01 Maintains cooktops and ranges
  • E-17.02 Repairs cooktops and ranges
  • E-17.03 Installs cooktops and ranges

E-18 · Services refrigerators and ice makers

3 official exam questions · 9 in the practice bank

  • E-18.01 Maintains refrigerators and ice makers
  • E-18.02 Repairs refrigerators and ice makers
  • E-18.03 Installs refrigerators and ice makers

E-19 · Services air conditioners and heat pumps

2 official exam questions · 9 in the practice bank

  • E-19.01 Maintains air conditioners and heat pumps
  • E-19.02 Repairs air conditioners and heat pumps
  • E-19.03 Installs air conditioners and heat pumps

E-20 · Services consumer products

1 official exam question · 4 in the practice bank

  • E-20.01 Replaces consumer products
  • E-20.02 Installs consumer products
FInterior and exterior components12%1560

F-21 · Diagnoses interior and exterior components

7 official exam questions · 20 in the practice bank

  • F-21.01 Diagnoses interior components
  • F-21.02 Diagnoses exterior components

F-22 · Services interior components

4 official exam questions · 21 in the practice bank

  • F-22.01 Maintains interior components
  • F-22.02 Repairs interior components
  • F-22.03 Installs interior components

F-23 · Services exterior components

4 official exam questions · 19 in the practice bank

  • F-23.01 Maintains exterior components
  • F-23.02 Repairs exterior components
  • F-23.03 Installs exterior components
GFrames and mechanical components10%1248

G-24 · Diagnoses frames and mechanical components

4 official exam questions · 20 in the practice bank

  • G-24.01 Diagnoses frames
  • G-24.02 Diagnoses running gear
  • G-24.03 Diagnoses levelling systems
  • G-24.04 Diagnoses slide-out systems
  • G-24.05 Diagnoses lifting systems

G-25 · Services frames

1 official exam question · 4 in the practice bank

  • G-25.01 Maintains frames
  • G-25.02 Repairs frames

G-26 · Services running gear

2 official exam questions · 6 in the practice bank

  • G-26.01 Maintains running gear
  • G-26.02 Repairs running gear

G-27 · Services levelling systems

2 official exam questions · 9 in the practice bank

  • G-27.01 Maintains levelling systems
  • G-27.02 Repairs levelling systems
  • G-27.03 Installs levelling systems

G-28 · Services slide-out systems

2 official exam questions · 5 in the practice bank

  • G-28.01 Maintains slide-out systems
  • G-28.02 Repairs slide-out systems

G-29 · Services lifting systems

1 official exam question · 4 in the practice bank

  • G-29.01 Maintains lifting systems
  • G-29.02 Repairs lifting systems
HTowing systems7%832

H-30 · Diagnoses towing systems

4 official exam questions · 10 in the practice bank

  • H-30.01 Diagnoses tow vehicle systems
  • H-30.02 Diagnoses towed vehicle systems

H-31 · Services tow vehicle systems

2 official exam questions · 12 in the practice bank

  • H-31.01 Maintains tow vehicle systems
  • H-31.02 Repairs tow vehicle systems
  • H-31.03 Installs tow vehicle systems

H-32 · Services towed vehicle systems

2 official exam questions · 10 in the practice bank

  • H-32.01 Maintains towed vehicle systems
  • H-32.02 Repairs towed vehicle systems
  • H-32.03 Installs towed vehicle systems

Source: the official Recreation Vehicle Service Technician standard and exam breakdown. Check your own requirements with your province or territory.

Questions about Recreation Vehicle Service Technician exam prep

Study guide
Is there a free Recreation Vehicle Service Technician Red Seal practice test?

Yes. Recreation Vehicle Service Technician Exam 1 is a full practice exam of 120 questions with an explanation for every answer. It is free with a free account in every available trade: unlimited retakes, no expiry and no credit card. The same account plays Question Match with Exam 1. Without an account, try 12 sample questions, math formulas, 20 flashcards and Flashcard Match.

Is there a Recreation Vehicle Service Technician practice test with answers?

Yes. Every Recreation Vehicle Service Technician practice question comes with its correct answer and an explanation of why it is right. In the free 12-question sample, submit your answers to see the correct answers, the explanations and your score, with no account. Exam 1, free with a free account, and every paid exam also show your score by Major Work Activity. These are original practice questions, not real exam questions.

How many questions are on the Recreation Vehicle Service Technician Red Seal exam?

The official Recreation Vehicle Service Technician Red Seal exam has 120 multiple-choice questions. Each question has four options and one correct answer. The writing time is four hours and the pass mark is 70%: at least 84 of 120 questions correct.

What topics are on the Recreation Vehicle Service Technician Red Seal exam?

The published exam breakdown has 8 Major Work Activities (MWAs) or blocks: A, Common occupational skills (10 questions); B, Plumbing systems (17 questions); C, Electrical systems (22 questions); D, LP gas systems (18 questions); E, Appliances and consumer products (18 questions); F, Interior and exterior components (15 questions); G, Frames and mechanical components (12 questions); H, Towing systems (8 questions).

Can I challenge the Recreation Vehicle Service Technician Red Seal exam without an apprenticeship?

Yes. Experienced workers apply to their provincial or territorial authority as trade qualifiers (challengers in New Brunswick, a Trade Equivalency Assessment in Ontario); once it verifies your documented hands-on hours, you write the same 120-question Red Seal exam as a completing apprentice. Quebec has no challenge exam: where it certifies the trade, experienced workers earn a Quebec certificate first, by recognition of their hours or skills, and then enrol in its Red Seal Program. The federal Ellis Chart lists the hours each authority requires for this trade, from 7,000 in Ontario to 10,000 in Prince Edward Island (read 2026-10-29); the table on this page shows every province. Buying practice material does not make you eligible; the authority decides.

How do your Recreation Vehicle Service Technician practice exams follow the official breakdown?

Every practice question maps to an MWA and task, and nearly every question maps to a specific subtask. Numbered practice exams match the published question count for each MWA. Mixed exams combine questions from your trade’s numbered exams; their topic distribution can vary.

What are Flashcard Match and Question Match?

Flashcard Match deals a board of Recreation Vehicle Service Technician flashcards on the left and their answers, shuffled, on the right; you match each card to its answer. Question Match does the same with Recreation Vehicle Service Technician practice exam questions. Every round deals a new mix, so there are more than 1,000 different rounds of each.

How many Recreation Vehicle Service Technician practice exams are included?

Pass Your Red Seal includes 4 practice exams and 480 original practice questions for Recreation Vehicle Service Technician. Study access includes answers, explanations, practice and timed modes, and results by topic. The practice-bank total covers all available exams; it is separate from the 120 questions on the official exam.

Are Recreation Vehicle Service Technician flashcards included?

Yes. Every Recreation Vehicle Service Technician plan includes 240 flashcards in two exam-weighted sets of 120 cards. Each set follows the Major Work Activity and task question counts of the official Red Seal Occupational Standard - Recreation Vehicle Service Technician (2022) exam breakdown. Review the answer, reasoning, exam trap and standard reference on each card, then use your flashcard score by Major Work Activity to focus your next review.

Can I try Recreation Vehicle Service Technician practice questions for free?

Yes. Try 12 free Recreation Vehicle Service Technician questions without an account or payment. The sample uses the same format as the full exams: answer one question at a time, navigate between questions, submit your answers, and review your score and explanations. Create a free account to take Exam 1, a full practice exam, in every available trade: unlimited retakes, no expiry and no credit card. Review explanations and your score by MWA, and play Question Match with Exam 1’s questions. Exams 2 onward, mixed exams, paid flashcards and full Flashcard Match and Question Match require paid access for that trade.

How much does Recreation Vehicle Service Technician study access cost?

Study access for Recreation Vehicle Service Technician costs $8.99 for 1 month or $14.99 for 12 months. Each plan covers this one trade. Pay once, or choose optional renewal with the 1 month plan: $8.99 for the first month, then $5.99 a month. Stop future renewals in your account.

Challenge the Recreation Vehicle Service Technician exam without an apprenticeship

How it works

Experienced workers in the recreation vehicle service technician trade can write this Red Seal exam as trade qualifiers once their province verifies enough hands-on experience. The hours below are the figures each authority reports to the federal Ellis Chart, read 29 October 2026; the trade’s own form or profile sets the final rule, and each province’s guide has the forms, fees and steps.

Experience required to challenge the Recreation Vehicle Service Technician Red Seal exam
Province or territory, with its guideHours to challengeApprenticeship and certification
British Columbia7,020Apprenticeship 5,400 hours · voluntary certification
Alberta7,200Apprenticeship 5,520 hours · compulsory certification
Saskatchewan7,200Apprenticeship 4,800 hours · voluntary certification
Manitoba7,200Apprenticeship 4,800 hours · voluntary certification
Ontario
Recreation Vehicle Technician
7,000Apprenticeship 7,000 hours · voluntary certification
QuebecQuebec certificate firstApprenticeship 2 years hours · voluntary certification
New Brunswick7,200Voluntary certification
Nova Scotia8,100Voluntary certification
Prince Edward Island10,000Voluntary certification
Newfoundland and Labrador8,100Voluntary certification
Yukon8,100Apprenticeship 5,400 hours · voluntary certification
Northwest TerritoriesNo challenge route
NunavutNo challenge route

Source: Ellis Chart, Recreation Vehicle Service Technician, published by the Canadian Council of Directors of Apprenticeship. Each authority sets and changes its own rules; confirm the current figure on its page before you apply.