Pass Your Red Seal

How to challenge the Red Seal exam in Newfoundland and Labrador

Newfoundland and Labrador’s Trade Qualifier route: 1.5 times the apprenticeship hours, no fees since April 2025, a six-month exam window and the rewrite rules.

Who decides
Apprenticeship and Trades Certification Division (ATCD)
What the route is called
Trade Qualifier
Experience required
1.5 × the apprenticeship’s on-the-job hours, within the last ten years (10,800 for a 7,200-hour trade)
Application fee
None: application and exam fees eliminated 1 April 2025
Time to a decision
Not published; you must attempt the exam within six months of approval
Exam attempts
Free rewrite after 30 days; a third attempt needs an approved course of study
The exam
The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.

References checked . Confirm application and exam requirements with the responsible authority.

Who can challenge the Red Seal exam in Newfoundland and Labrador

A trade qualifier needs at least 1.5 times the on-the-job work experience of an apprenticeship term in the trade, verified documentation of work skills signed by a certified journeyperson, and documented verification of time and hours worked, all within the last ten years. The February 2026 application form prints the hours for every designated trade: 10,800 for Construction Electrician, Industrial Electrician, Plumber, Steamfitter/Pipefitter, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker, Carpenter, Millwright, Heavy Duty Equipment Technician, Automotive Service Technician, Truck and Transport Mechanic, Machinist and Glazier; 8,100 for Welder, Cook, Baker, Gasfitter Class A, Parts Technician, Boilermaker, Bricklayer and Roofer; 5,400 for Gasfitter Class B and Hairstylist.

No in-school training is required, though training may be available as a theoretical refresher. Internationally trained workers are told to follow the Trade Qualifier process to have their skills formally recognized; language, residency, work-authorization and apply-from-abroad rules are not published, and the form’s address block has a country field.

Hours required by trade in Newfoundland and Labrador

These are the experience figures Apprenticeship and Trades Certification Division (ATCD) publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.

Unless a trade’s note says otherwise:

  • Printed on the February 2026 Trade Qualifier application form
Experience needed to challenge the Red Seal exam in Newfoundland and Labrador, by trade
TradeExperience requiredNotes
Agricultural Equipment Technician10,800
Appliance Service Technician8,100
Auto Body and Collision Technician10,800
Automotive Refinishing Technician5,400
Automotive Service Technician10,800
Baker8,100
Boilermaker8,100
Bricklayer8,100
Cabinetmaker10,800
Carpenter10,800
Concrete Finisher5,400
Construction Craft Worker5,400
Construction Electrician (compulsory)10,800
Cook8,100Practical exam before the written exam
Drywall Finisher and Plasterer8,100
Floorcovering Installer8,100
Gasfitter – Class A8,100
Gasfitter – Class B5,400
Glazier10,800
Hairstylist5,400Practical exam before the written exam
Heavy Duty Equipment Technician10,800
Heavy Equipment Operator (Dozer)7,200 for the first machine, 2,400 for each additional
Heavy Equipment Operator (Excavator)7,200 for the first machine, 2,400 for each additional
Heavy Equipment Operator (Tractor-Loader-Backhoe)7,200 for the first machine, 2,400 for each additional
Industrial Electrician10,800
Industrial Mechanic (Millwright)10,800
Instrumentation and Control Technician10,800
Insulator (Heat and Frost)10,800
Ironworker (Generalist)8,100
Ironworker (Reinforcing)5,400
Ironworker (Structural/Ornamental)8,100The Ellis Chart shows 7,200
Landscape Horticulturalist9,000
Lather (Interior Systems Mechanic)8,100
Machinist10,800Practical exam before the written exam
Metal Fabricator (Fitter)8,100
Mobile Crane Operator (compulsory)8,100The Ellis Chart marks no challenge option, the form lists it
Motorcycle Technician9,600
Oil Heat System Technician8,100
Painter and Decorator8,100
Parts Technician8,100
Plumber10,800
Powerline Technician10,800
Recreation Vehicle Service Technician8,100
Refrigeration and Air Conditioning Mechanic10,800
Roofer8,100
Sheet Metal Worker10,800
Sprinkler Fitter10,800
Steamfitter/Pipefitter10,800
Tilesetter8,100
Tool and Die Maker10,800
Tower Crane Operator (compulsory)4,500The Ellis Chart marks no challenge option, the form lists it
Transport Trailer Technician5,400
Truck and Transport Mechanic10,800
Welder8,100Practical exam before the written exam

Documents and forms you need

Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Apprenticeship and Trades Certification Division (ATCD) uses.

  • The Trade Qualifier Application to be Examined (February 2026), a fillable PDF: one trade only, prior exam attempts, other certifications, social insurance number, date of birth, address including country, email, phone, the accommodation question and your signature.
  • A Record of Work Experiences form for each employer, specific to your trade (59 are posted): the employer verifies your employment dates and total hours with its business number, and a journeyperson certified in that trade signs the skills checklist with their certificate number. A journeyperson in another trade may sign sections whose skills are common to both trades.
  • A Supporting Affidavit, sworn before a justice of the peace, commissioner of oaths or notary public, when journeyperson verification or employer records cannot be obtained, listing employers, periods and hours with the reasons attached, plus records of employment or letters on company letterhead.
  • After approval, the online Certification Exam Registration Form with your Trade Qualifier number, trade, requested date and location, and any accommodation request; a Reader, Translator or Interpreter Declaration if you arrange one; accommodation documentation prepared and signed by a qualified professional at least three weeks before the exam.
  • Government-issued photo identification on exam day, with the confirmation letter.

How to apply in Newfoundland and Labrador, step by step

The steps follow the order Apprenticeship and Trades Certification Division (ATCD) describes.

  1. Complete the Trade Qualifier Application to be Examined for your trade.
  2. Complete a Record of Work Experiences form for each employer, with the skills checklist signed by a certified journeyperson. If no employer or journeyperson can verify a period, contact an Apprenticeship Program Officer about the Supporting Affidavit.
  3. Drop off, mail or email everything to the nearest ATCD office (ApprenticeshipOnline@gov.nl.ca, toll free 1-877-771-3737); offices are in Mount Pearl, Clarenville, Grand Falls-Windsor, Corner Brook, Happy Valley-Goose Bay and Wabush. The division reviews it, and recognition of prior learning may be required.
  4. If approved, you must attempt the exam within six months of the approval date: submit the online Certification Exam Registration Form by the deadline, about two weeks before the sitting you want, and a confirmation email with the date, location and time arrives about a week before. Cooks, welders, hairstylists and machinists pass a practical exam before the written one.
  5. Write the four-hour exam with government-issued photo ID, arriving 15 minutes early; all materials are provided. Grades are usually released 10 business days after the exam, and anyone below 70% receives an email with a breakdown of results by section.
  6. Rewrite at least 30 days later, ideally within 90; the division schedules a rewrite within 15 business days of your form. A third or later attempt requires a course of study approved by the division.

What it costs in Newfoundland and Labrador

No fees. Newfoundland and Labrador eliminated the $50 Trade Qualifier application fee and the $200 certification exam and rewrite fee effective 1 April 2025 (release of 22 April 2025), along with the $50 replacement-certificate fee; the division’s news page says all fees for ATCD clients, including examination, logbook and certificate fees for trade qualifiers, were eliminated in Budget 2025, and that fees paid on or after 1 April 2025 can be refunded. No practical-exam fee is named anywhere, and no fee appears on the February 2026 form or the exam pages as published on 31 October 2026.

How long it takes

Plan around these published timelines; they start when the authority has a complete application.

  • Application processing time is not published.
  • Approved applicants must attempt the examination within six months of the approval date.
  • Exam registration closes about two weeks before each listed date; accommodation documents are due at least three weeks before; a confirmation email arrives about a week before the exam.
  • Grades are usually released 10 business days after the exam; a rewrite is scheduled within 15 business days of the registration form and can be held 20 business days after the original writing.
  • An accommodation decision is emailed within five business days of a complete request, and an accommodated exam is held within 20 business days of the original date. How the certificate is delivered is not published.

Writing the Red Seal exam in Newfoundland and Labrador

Where and how the exam is written, and what to bring.

  • Exams and rewrites are written at regional ATCD offices in St. John’s, Clarenville, Grand Falls-Windsor, Corner Brook, Happy Valley-Goose Bay and Wabush, roughly monthly at each; the registration form lists the dates.
  • The exam lasts four hours; bring government-issued photo ID, arrive 15 minutes early, and use only the materials provided. Cheating ends the exam immediately, and trade qualifiers must abide by the Exam Misconduct Policy.
  • Exam languages are not stated. Accommodations can include extra time up to six hours, a quiet location, a reader, a translator or ASL interpreter you arrange with a signed declaration, a scribe, assistive technology, special formatting or a split exam, requested through certificationexams@gov.nl.ca or an Apprenticeship Program Officer.
  • Cook, Welder, Hairstylist and Machinist trade qualifiers must pass a practical exam before attempting the written exam. Deferrals go by email at least three business days before; three or more deferrals move you to the back of the rewrite queue.

If you do not pass

Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.

  • A rewrite may happen at least 30 calendar days after the original writing and should be within 90 days; there is no fee. The same page’s service standard says rewrites can be conducted 20 business days after the original writing, so count on 30 calendar days and ask the division if you need sooner.
  • No maximum number of attempts is published, but a third or further attempt requires a course of study approved by the division.
  • Candidates below 70% receive an email with a breakdown of results by exam section. Between attempts, the free Virtual Learning Strategy program offers a learning strategist; trade qualifiers qualify if they attended training within the past two years in a trade it tutors, and apply through an Apprenticeship Program Officer. Its Essential Skills for Success Assessment can also be taken on your own.
  • The Self-Study Program, with a mandatory group counselling session by phone and 30 to 90 days of study before a rewrite, is for trade qualifiers with at least three unsuccessful attempts who have completed refresher training, wrote the exam within the past 10 years and worked in the trade within the past two years.

Compulsory trades in Newfoundland and Labrador

Only five trades are compulsory in Newfoundland and Labrador: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator and Tower Crane Operator, where a worker must hold a Certificate of Qualification or be a registered apprentice; no temporary permit is published. Plumber, gasfitter, refrigeration mechanic, steamfitter, sheet metal worker, automotive service technician, heavy duty equipment technician, welder, carpenter, hairstylist, cook and baker are all voluntary, and all appear on the 62-trade designated list.

Applying from outside Canada or as a newcomer

What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.

  • Internationally trained workers in a skilled trade must follow the Trade Qualifier process to have their skills formally recognized; certificates from other countries are not addressed. No residency, citizenship or work-authorization rule is published, applying before arrival is not addressed, and the form’s address block has a country field.
  • The skills checklist on the Record of Work Experiences must be signed by a journeyperson certified in the trade, or, for skills common to both trades, by a journeyperson in another trade. Translation rules are not published; a translator or interpreter for the exam is arranged by you with a signed declaration form.
  • The division points newcomers to the Newfoundland and Labrador Provincial Nominee Program and the Atlantic Immigration Program for permanent residence; trade certification and immigration are separate.

If you are already certified elsewhere in Canada

A Certificate of Qualification from another province or territory is verified by the division, which provides an equivalency letter if an employer or regulator needs one. A holder of a provincial certificate in a Red Seal trade from elsewhere can have Newfoundland and Labrador invigilate the Red Seal exam by arrangement with the issuing authority. Apprentices moving in are covered by the Provincial-Territorial Apprentice Mobility Protocol and the Atlantic memorandum of understanding.

Good to know

Details that catch people out.

  • The February 2026 form is the authority where it disagrees with the Ellis Chart: Ironworker (Structural/Ornamental) is 8,100 hours on the form against 7,200 on the chart, and the form lists Mobile Crane Operator (8,100) and Tower Crane Operator (4,500) where the chart marks no challenge option.
  • The form also lists trades this site does not cover: Boom Truck Operator 3,600, Residential Electrician 7,200, Stonemason 10,800, Power Sport Technician 8,100 and Power Systems Operator 5,400. The division’s Study Strategies and Exam Preparation Guide (March 2026) is linked from its certification exam page.

Words Apprenticeship and Trades Certification Division (ATCD) uses

Trade Qualifier; Trade Qualifier Application to be Examined; Record of Work Experiences; Supporting Affidavit; Apprenticeship Program Officer; recognition of prior learning; Certificate of Qualification. The plain-language guide connects these to the words other provinces and tradespeople use.

Prepare for the exam

Once Apprenticeship and Trades Certification Division (ATCD) approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.

Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.

Other provinces and territories

Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.

Common questions

How many hours do I need to challenge the Red Seal exam in Newfoundland and Labrador?

At least 1.5 times the apprenticeship’s on-the-job hours, within the last ten years, printed trade by trade on the February 2026 application: 10,800 for electrician, plumber, steamfitter, sheet metal worker, refrigeration mechanic, carpenter, millwright, heavy duty equipment technician, automotive service technician, truck and transport mechanic and machinist; 8,100 for welder, cook, baker, gasfitter A, parts technician, boilermaker and bricklayer; 5,400 for gasfitter B and hairstylist.

What does it cost to challenge the Red Seal exam in Newfoundland and Labrador?

Nothing. The $50 Trade Qualifier application fee and the $200 exam and rewrite fee were eliminated on 1 April 2025, and replacement certificates are free too. Fees paid on or after 1 April 2025 can be refunded.

Who has to sign my experience record?

Each employer verifies your dates and total hours on the trade’s Record of Work Experiences form, and a journeyperson certified in that trade signs the skills checklist with their certificate number; a journeyperson in another trade may sign sections common to both trades. If no employer or journeyperson can verify a period, a Supporting Affidavit sworn before a justice of the peace, commissioner of oaths or notary public can stand in, with records of employment or letters attached.

How long do I have to write the exam once approved?

Six months from the approval date. Sittings run roughly monthly at the six regional offices, registration closes about two weeks before each date, and the confirmation arrives about a week before the exam.

Which trades need a practical exam in Newfoundland and Labrador?

Cook, Welder, Hairstylist and Machinist trade qualifiers must pass a practical exam before attempting the written Red Seal exam.

What happens if I do not pass?

You receive an email with a breakdown of your results by section and may rewrite, free, at least 30 days later and ideally within 90. A third or later attempt requires a course of study approved by the division.

Which trades are compulsory in Newfoundland and Labrador?

Only Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator and Tower Crane Operator. Every other trade on this site, including plumber, refrigeration mechanic, automotive service technician and welder, is voluntary there.