How to challenge the Red Seal exam in the Northwest Territories
How Trade Qualification works in the NWT: the apprenticeship term plus one 1,800-hour period, no application fee, a $200 exam fee, the forms and where to apply.
- Who decides
- Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification
- What the route is called
- Trade Qualification (TQ)
- Experience required
- Apprenticeship term plus one 1,800-hour period (9,000 for a four-period trade)
- Application fee
- No fee to apply; $200 exam fee
- Time to a decision
- Not published; certificates issued within 15 business days of verification
- Exam attempts
- After a fail the Director may allow a $50 supplemental exam or direct training or more work experience; no waiting period or attempt limit is set
- The exam
- The Red Seal exam for your trade: multiple choice, 100 to 150 questions, four hours, 70% to pass.
References checked . Confirm application and exam requirements with the responsible authority.
Who can challenge the Red Seal exam in Northwest Territories
The Trade Qualification and Designated Trainer Application prints the hours for each designated trade: the length of the apprenticeship in 1,800-hour periods, plus one more period. A four-period trade such as Construction Electrician, Plumber, Steamfitter and Pipefitter, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker, Automotive Service Technician, Carpenter or Millwright needs 9,000 hours; a three-period trade such as Welder, Cook, Baker, Gasfitter A or Heavy Equipment Mechanic (Off-Road) needs 7,200; two-period trades such as Gasfitter B and Hairstylist need 5,400.
Section 26(4) of the Apprenticeship and Trade Certification Regulations sets the rule behind the table: proof satisfactory to the Director that you worked in the trade in a manner that shows sufficient variety of experience to establish competence, for at least the term of the apprenticeship program plus 1,800 hours.
Your experience is verified on a trade-specific Verification of Trade Competence form signed by your supervising journeyperson, which your Career Development Officer provides; if that is impossible, you list every previous employer with the tasks, dates and total hours in Section 7 of the application. Self-employed or unemployed applicants add a self-declaration letter. The department may contact previous employers and other governments to verify what you report. No residency, citizenship, language or work-authorization rule is published; the bilingual form asks for a mailing address and a Social Insurance Number.
Hours required by trade in Northwest Territories
These are the experience figures Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification publishes for each trade, or the result of its published rule where the note says the figure is computed. Hours are hands-on work in the trade; the authority decides what counts. Each trade links to its practice exams.
Unless a trade’s note says otherwise:
- Printed on the Trade Qualification application form
| Trade | Experience required | Notes |
|---|---|---|
| Appliance Service Technician | 7,200 | 3 × 1,800 plus one period |
| Auto Body Technician | 9,000 | 4 × 1,800 plus one period; the Prepper stream is 5,400 and the Repairer stream 7,200 |
| Auto Body Technician – Auto Body Refinisher | 5,400 | 2 × 1,800 plus one period |
| Automotive Service Technician | 9,000 | 4 × 1,800 plus one period |
| Baker | 7,200 | 3 × 1,800 plus one period |
| Cabinetmaker | 9,000 | The Ellis Chart marks a practical final exam |
| Carpenter | 9,000 | The Ellis Chart marks a practical final exam |
| Construction Electrician | 9,000 | 4 × 1,800 plus one period |
| Cook | 7,200 | 3 × 1,800 plus one period |
| Floor Covering Installer | 7,200 | 3 × 1,800 plus one period; the Ellis Chart shows 5,400 and a practical final exam, so confirm with the office |
| Gasfitter A | 7,200 | 3 × 1,800 plus one period |
| Gasfitter B | 5,400 | 2 × 1,800 plus one period |
| Glazier | 9,000 | The Ellis Chart marks a practical final exam |
| Hairstylist | 5,400 | The Ellis Chart marks a practical final exam |
| Heavy Equipment Mechanic – Off-Road | 7,200 | 3 × 1,800 plus one period; the Ellis Chart shows 9,000, so confirm with a Career Development Officer |
| Heavy Equipment Mechanic – Transport Trailer | 3,600 | 1 × 1,800 plus one period; the Ellis Chart shows 5,400, so confirm with the office |
| Heavy Equipment Mechanic – Truck and Transport | 7,200 | 3 × 1,800 plus one period |
| Industrial Electrician | 9,000 | 4 × 1,800 plus one period |
| Instrument Technician | 9,000 | 4 × 1,800 plus one period |
| Insulator – Heat and Frost | 9,000 | 4 × 1,800 plus one period; the Ellis Chart shows 7,200, so confirm with the office |
| Machinist | 9,000 | 4 × 1,800 plus one period |
| Millwright – Industrial Mechanic | 9,000 | 4 × 1,800 plus one period |
| Mobile Crane Operator | 7,200 | On the designated-trades list but not in the form’s table; the figure is the Ellis Chart’s, with a practical final exam |
| Oil Heat Systems Technician | 7,200 | 3 × 1,800 plus one period |
| Painter and Decorator | 7,200 | 3 × 1,800 plus one period |
| Parts Technician (Parts or Materials stream) | 7,200 | 3 × 1,800 plus one period |
| Plumber | 9,000 | 4 × 1,800 plus one period |
| Powerline Electrician | 9,000 | 4 × 1,800 plus one period |
| Refrigeration and Air Conditioning Mechanic | 9,000 | 4 × 1,800 plus one period |
| Roofer | 9,000 | 4 × 1,800 plus one period |
| Sheet Metal Worker | 9,000 | The Ellis Chart marks a practical final exam |
| Sprinkler Systems Installer | 9,000 | 4 × 1,800 plus one period |
| Steamfitter and Pipefitter | 9,000 | 4 × 1,800 plus one period |
| Welder | 7,200 | The Ellis Chart marks a practical final exam |
Documents and forms you need
Have these ready before you start the application. Use the authority’s current forms; the names below are the ones Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification uses.
- The Trade Qualification and Designated Trainer Application (form NWT9318/1023), a 12-page bilingual PDF, with Trade Qualification ticked in Section 1. It asks for your Social Insurance Number, legal names, mailing address, any special-needs services with official documentation, previous education and technical training, any earlier apprenticeship with its jurisdiction, level and certificate numbers, and your declaration.
- The trade-specific Verification of Trade Competence form, which your Career Development Officer provides, completed and signed by your supervising journeyperson. If that is not possible, Section 7 of the application lists each previous employer, the tasks you performed, the dates, total hours and the supervising journeyperson with their certificate number and issuing jurisdiction.
- The Apprenticeship, Trades and Occupation Certification Fee Form (NWT9309/0722), which records any payment; there is no fee to apply.
- Original or certified true copies of your certificates, diplomas and transcripts. A lawyer or notary public can certify a copy, or the institution can send transcripts directly to the ATOC office.
- A self-declaration letter if you are self-employed or not employed: on letterhead, naming the company, your start date and position, with a detailed list of the trade tasks you perform as set out in the trade’s Verification of Trade Competence form, signed and dated.
- A current résumé.
How to apply in Northwest Territories, step by step
The steps follow the order Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification describes.
- Ask your Career Development Officer for the trade-specific Verification of Trade Competence form and have your supervising journeyperson complete and sign it. If that is not possible, complete Section 7 of the application with every previous employer, the tasks, dates and total hours.
- Complete the Trade Qualification and Designated Trainer Application, ticking Trade Qualification in Section 1, and the Apprenticeship and TQ Fee Form. There is no fee to apply.
- Attach original or certified true copies of your certificates, diplomas and transcripts, a self-declaration letter if you are self-employed or not employed, and a current résumé.
- Submit the package to your local ECE Service Centre: Fort Simpson, Fort Smith, Hay River, Inuvik, Norman Wells or Yellowknife.
- An ATOC certification officer records the outcome: program duration, technical training credit, work experience credit, the balance required, whether technical training is required and whether an examination is required.
- If an exam is required, pay the non-refundable $200 Qualification Examination fee through the fee form and write the exam as the office arranges. Results and official marks letters appear in the MyECE ATOC online portal once you have registered for it by emailing apprenticeship@gov.nt.ca for a web access code.
What it costs in Northwest Territories
Fees as published on 31 October 2026 on the fee form (July 2022) and the application form (October 2023): no fee to apply for Trade Qualification; Trade Qualification Examination $200, non-refundable; supplemental Trade Qualification Examination $50; transfer of a Certificate of Qualification from another jurisdiction $100; replacement certificate $50; prior learning assessment $100. If the decision requires technical training, apprenticeship tuition is $98 a week. The regulations’ Schedule B also sets the $200 and $50 exam fees but lists no fee for a certificate of qualification, so ask the office whether the $100 transfer fee applies. Pay by cheque or money order at an ECE Service Centre or a Department of Finance office; Finance offices also take credit and debit cards, and a credit card payment (Visa or Mastercard only) can be arranged by phoning the Finance office for your region.
How long it takes
Plan around these published timelines; they start when the authority has a complete application.
- No processing time is published for a Trade Qualification assessment. ECE’s service standards commit to issuing a Certificate of Qualification within 15 business days after all required information is verified.
- How long an approval stays valid and how far ahead exams are booked are not published; ask your Career Development Officer when you apply.
- Exam results and official marks letters are available through the MyECE ATOC online portal; register by emailing apprenticeship@gov.nt.ca for a web access code.
Writing the Red Seal exam in Northwest Territories
Where and how the exam is written, and what to bring.
- Where and how often the Qualification Examination is written is not published; the six regional ECE Service Centres deliver the program, and their Career Development Officers facilitate Trade Qualification assessments. Ask when you apply.
- The application asks you to describe any special-needs services you require, with official documentation. The form is in English and French; the languages the exam is offered in are not published.
- The Ellis Chart marks a practical final examination in the NWT for Carpenter, Sheet Metal Worker, Welder, Hairstylist, Cabinetmaker, Glazier, Floorcovering Installer and Mobile Crane Operator.
- The application says your information may be used to decide your eligibility to write the Interprovincial Standards (Red Seal) exam, if and when it is available in your trade.
If you do not pass
Rewrite rules are set by the authority. Before any rewrite, use the results breakdown to see which sections of the exam cost you marks.
- If you fail a qualification examination, section 26(6) of the Apprenticeship and Trade Certification Regulations (R-056-2012, last amended by R-051-2021) lets the Director permit you to take a supplemental qualification examination, take technical training courses as directed, or gain further work experience as directed.
- A supplemental Trade Qualification Examination costs $50, non-refundable, paid before you write it. The regulations set no waiting period and no maximum number of attempts; the office tells you which path applies.
- Official marks letters can be downloaded from the MyECE ATOC portal.
Compulsory trades in Northwest Territories
The Northwest Territories has no compulsory trades. Its Apprenticeship, Trade and Occupation Certification program covers 43 designated trades and 17 occupations, and the Ellis Chart shows certification as voluntary in the NWT for every trade on this site, with no extra licensing flagged. The designated list includes the common construction, mechanical and service trades; Boilermaker, Bricklayer, Metal Fabricator, the ironworker trades, Tilesetter, Drywall Finisher and Plasterer, Concrete Finisher, Construction Craft Worker, Landscape Horticulturist, Lather, Tower Crane Operator, the Heavy Equipment Operator trades, Agricultural Equipment Technician, Motorcycle Technician, Recreation Vehicle Service Technician and Tool and Die Maker are not designated. The Designated Trades Order of 2024 (R-016-2024) lists the same 43 trades.
Applying from outside Canada or as a newcomer
What the authority publishes about applying before you arrive, residency, work authorization and experience gained abroad. Immigration and work permits are separate from trade certification.
- No residency, citizenship or work-authorization requirement is published; the application takes any mailing address and asks for a Social Insurance Number.
- The form asks for the issuing jurisdiction of your supervising journeyperson’s certificate and of any earlier apprenticeship, and the department may contact previous employers and other governments to verify your experience. Translation requirements are not published.
- No temporary permit is needed to keep working while you wait, because no NWT trade is compulsory.
If you are already certified elsewhere in Canada
Section 27(2) of the regulations lets a person who holds certification equivalent to a certificate of qualification under the law of a province or territory request an NWT Certificate of Qualification. The fee form charges $100 for that transfer, while the regulations’ fee schedule lists no certificate of qualification fee. The application records your existing Certificate of Qualification and Red Seal numbers. Apprentices moving between provinces and territories are covered by the Provincial-Territorial Apprentice Mobility Protocol.
Good to know
Details that catch people out.
- Heavy Equipment Mechanic has three streams on the form: Off-Road (7,200 hours), Truck and Transport (7,200) and Transport Trailer (3,600). Parts Technician has Parts and Materials streams at 7,200 each. Auto Body Technician (9,000) has Prepper (5,400), Repairer (7,200) and Refinisher (5,400) streams.
- Where the form and the Ellis Chart disagree, the form’s figure is shown above with the chart’s beside it. The form also lists trades this site does not cover: Communication Technician and Electrical Motor Systems Technician (9,000), Housing Maintainer (7,200), Locksmith (9,000), Outdoor Power Equipment Technician (7,200) and Power System Technician (9,000).
Words Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification uses
Trade Qualification (TQ); Verification of Trade Competence (VTC) form; Career Development Officer (CDO); ECE Service Centre; Qualification Examination; ATOC. The plain-language guide connects these to the words other provinces and tradespeople use.
Official pages this guide was read from
Rules and fees change. These are the pages Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification publishes; confirm the current figures there before you pay or travel.
- NWT: apprenticeship, trade and occupation certification
- NWT: Trade Qualification and Designated Trainer Application (PDF)
- NWT: apprenticeship, trades and occupation certification fee form (PDF)
- NWT: designated trades
- NWT: Apprenticeship and Trade Certification Regulations, with the qualification exam rules in section 26 and the fees in Schedule B (PDF)
- NWT: Designated Trades Order R-016-2024 (PDF)
- NWT: ATOC service standards
- NWT: MyECE ATOC online portal
Prepare for the exam
Once Education, Culture and Employment — Apprenticeship, Trade and Occupation Certification approves you, you write the same Red Seal exam as a completing apprentice. It is built from your trade’s Red Seal Occupational Standard and its published exam breakdown, not from any school’s curriculum, so study from the standard and practise under time.
Try twelve free questions for your trade without an account, or Exam 1 in full with a free account, to see where you stand before your approval arrives.
Other provinces and territories
Moving, or comparing routes? Each of these guides covers one authority the same way: hours by trade, documents, steps, fees and rewrites.
- Challenge the Red Seal exam in British Columbia
- Challenge the Red Seal exam in Alberta
- Challenge the Red Seal exam in Saskatchewan
- Challenge the Red Seal exam in Manitoba
- Challenge the Red Seal exam in Ontario
- Challenge the Red Seal exam in Quebec
- Challenge the Red Seal exam in New Brunswick
- Challenge the Red Seal exam in Nova Scotia
- Challenge the Red Seal exam in Prince Edward Island
- Challenge the Red Seal exam in Newfoundland and Labrador
- Challenge the Red Seal exam in Yukon
- Challenge the Red Seal exam in Nunavut
Common questions
How many hours do I need to challenge the Red Seal exam in the Northwest Territories?
The apprenticeship term plus one 1,800-hour period, printed trade by trade on the Trade Qualification application. Four-period trades such as electrician, plumber, millwright, carpenter and automotive service technician need 9,000 hours; three-period trades such as welder, cook, baker and gasfitter A need 7,200; two-period trades such as gasfitter B and hairstylist need 5,400.
What does Trade Qualification cost in the NWT?
Nothing to apply. If the certification officer requires an exam, the Qualification Examination fee is $200, non-refundable, and a supplemental exam is $50. The fee form charges $100 to transfer a certificate from another jurisdiction, though the regulations’ fee schedule lists no certificate fee.
What happens if I fail the Qualification Examination in the NWT?
The Director may let you write a supplemental examination for $50, or direct you to take technical training courses or gain more work experience first. The regulations set no waiting period and no limit on attempts.
Do I need a Verification of Trade Competence form?
Yes, where possible. Your Career Development Officer provides the trade-specific form and your supervising journeyperson completes and signs it. If that is not possible, you list every previous employer, the tasks, dates and total hours in Section 7 of the application, and the department may contact those employers to verify them.
Who decides whether I have to write the exam?
An ATOC certification officer records the outcome of your Trade Qualification assessment: how much work-experience and technical-training credit you receive, what balance is required, and whether technical training or an examination is required.
Where do I write the exam in the Northwest Territories?
The department does not publish exam locations or dates. The six ECE Service Centres in Fort Simpson, Fort Smith, Hay River, Inuvik, Norman Wells and Yellowknife administer the program; ask your Career Development Officer when you apply.
Are any trades compulsory in the NWT?
No. The NWT designates trades for certification but names no compulsory trades, and the Ellis Chart shows certification as voluntary there for every trade on this site. You can keep working while your application is assessed.