Pass Your Red Seal

Steamfitter/Pipefitter Math

Online Red Seal Exam Preparation, built on official standards
MathQuestion 4 of 1070% to goContinue at question 4

10 questions

2 right · 1 wrong · 7 to do
  1. 1Force on a blind flange during a hydrostatic testForce = P × A · Procedural and application
  2. 2Heat output of steam radiators from EDR1 ft² of steam EDR = 240 Btuh · Procedural and application
  3. 3Growth of a steel steam main between anchorsExpansion = L × ΔT × α · Critical thinking
  4. 4The factor from kilopascals to psiConversion · Knowledge and recall
  5. 5Cubic metres to cubic feet for a tankConversion · Procedural and application
  6. 6Tons of cooling on a chilled water coilBtuh = gpm × 500 × ΔT · Procedural and application
  7. 7Pressure under a column of waterPressure = height × density · Procedural and application
  8. 8Drop of a steam main pitched 1/4 in per 10 ftGrade = drop ÷ run · Procedural and application
  9. 9Volume of a horizontal condensate tankVolume of a cylinder · Procedural and application
  10. 10Travel of a rolling offset with 45° fittingsTravel offset of a 45° elbow = 1.414 · Critical thinking

By question type

  • Procedural and application2 of 7 done
  • Critical thinking1 of 2 done
  • Knowledge and recall0 of 1 done

On the formula sheet

Part 1 · Question 4 of 101 part · 10 questions