Pass Your Red Seal

Cabinetmaker Math

Online Red Seal Exam Preparation, built on official standards
MathQuestion 4 of 1070% to goContinue at question 4

10 questions

2 right · 1 wrong · 7 to do
  1. 1Board feet in a hardwood orderBoard feet = thickness (in) × width (in) × length (ft) ÷ 12 · Procedural and application
  2. 2Panels from a sheet when the kerf countsLayout · Critical thinking
  3. 3Diagonal to square a carcassa² + b² = c² · Procedural and application
  4. 4The inch size that matches 19 mm stockConversion · Knowledge and recall
  5. 5Drawer box width for side-mount slidesBox width = opening − 2 × slide clearance · Procedural and application
  6. 6Edge banding for a run of shelvesLength = pieces × edge length × (1 + waste) · Procedural and application
  7. 7Lacquer for three coats on a set of doorsLitres = area × coats ÷ coverage · Procedural and application
  8. 8Banding around a round table topCircumference = π × D · Procedural and application
  9. 9Rise of a hutch gable at 6:12Total rise = total run ÷ unit run × unit rise · Procedural and application
  10. 10A 2 1/4 in rail on a metric cut listConversion · Procedural and application

By question type

  • Procedural and application2 of 8 done
  • Critical thinking1 of 1 done
  • Knowledge and recall0 of 1 done

On the formula sheet

Part 1 · Question 4 of 101 part · 10 questions