Sign in
MathOnline Red Seal Exam Preparation, built on official standards
Steamfitter/Pipefitter math scenarios
MathQuestion 4 of 1070% to goContinue at question 4
10 questions
2 right · 1 wrong · 7 to do- 1Force on a blind flange during a hydrostatic test
- 2Heat output of steam radiators from EDR
- 3Growth of a steel steam main between anchors
- 4The factor from kilopascals to psi
- 5Cubic metres to cubic feet for a tank
- 6Tons of cooling on a chilled water coil
- 7Pressure under a column of water
- 8Drop of a steam main pitched 1/4 in per 10 ft
- 9Volume of a horizontal condensate tank
- 10Travel of a rolling offset with 45° fittings
Part 1
2 right · 1 wrong · 7 to do- 1Force on a blind flange during a hydrostatic testForce = P × A · Procedural and application
- 2Heat output of steam radiators from EDR1 ft² of steam EDR = 240 Btuh · Procedural and application
- 3Growth of a steel steam main between anchorsExpansion = L × ΔT × α · Critical thinking
- 4The factor from kilopascals to psiConversion · Knowledge and recall
- 5Cubic metres to cubic feet for a tankConversion · Procedural and application
- 6Tons of cooling on a chilled water coilBtuh = gpm × 500 × ΔT · Procedural and application
- 7Pressure under a column of waterPressure = height × density · Procedural and application
- 8Drop of a steam main pitched 1/4 in per 10 ftGrade = drop ÷ run · Procedural and application
- 9Volume of a horizontal condensate tankVolume of a cylinder · Procedural and application
- 10Travel of a rolling offset with 45° fittingsTravel offset of a 45° elbow = 1.414 · Critical thinking
By question type
- Procedural and application2 of 7 done
- Critical thinking1 of 2 done
- Knowledge and recall0 of 1 done