Pass Your Red Seal

Metal Fabricator (Fitter) Math

Online Red Seal Exam Preparation, built on official standards
MathQuestion 4 of 1070% to goContinue at question 4

10 questions

2 right · 1 wrong · 7 to do
  1. 1Angle of a brace from rise and runDegrees = tan⁻¹(rise ÷ run) · Procedural and application
  2. 2Stretch-out of a rolled cylinderStretch-out = π × mean diameter · Procedural and application
  3. 3Mass of a 12 mm plate before the liftMass = volume × 7 850 kg/m³ · Critical thinking
  4. 4The plate weight figure on a U.S. take-offPlate weight per square foot · Knowledge and recall
  5. 5Flat blank from a bend deductionFlat length = sum of outside dimensions − bend deduction · Procedural and application
  6. 6Weld length on an intermittent seamWeld length = welds per side × weld length × sides · Procedural and application
  7. 7A 620 kg frame on a lift gate rated in poundsConversion · Procedural and application
  8. 83/8 in plate in millimetresConversion · Procedural and application
  9. 9What GOSL on an angle detail meansAcronym · Knowledge and recall
  10. 10Diagonal for squaring a framePythagorean theorem · Procedural and application

By question type

  • Procedural and application2 of 7 done
  • Critical thinking1 of 1 done
  • Knowledge and recall0 of 2 done

On the formula sheet

Part 1 · Question 4 of 101 part · 10 questions