Pass Your Red Seal

Sprinkler Fitter Math

Online Red Seal Exam Preparation, built on official standards
MathQuestion 4 of 1070% to goContinue at question 4

10 questions

2 right · 1 wrong · 7 to do
  1. 1Discharge from a standard sprinklerQ = K√P · Procedural and application
  2. 2Pressure needed at the riser gaugeElevation head 0.433 psi/ft · Procedural and application
  3. 3Sprinkler spacing along a branch lineArea per sprinkler · Critical thinking
  4. 4The factor from psi to kilopascalsConversion · Knowledge and recall
  5. 5Friction loss over pipe and fittingsFriction loss = equivalent length × loss per foot · Procedural and application
  6. 6Cut length of a threaded pipe between teesCut length = centre to centre − take-outs + thread make-up · Procedural and application
  7. 7Fire pump rating in gpmConversion · Procedural and application
  8. 8Hydrostatic test pressure on a metric gaugeConversion · Procedural and application
  9. 945° offset around a duct in a branch lineTravel = offset × 1.414 · Procedural and application
  10. 10Water supply for the system and hose demandVolume = flow × duration · Critical thinking

By question type

  • Procedural and application2 of 7 done
  • Critical thinking1 of 2 done
  • Knowledge and recall0 of 1 done

On the formula sheet

Part 1 · Question 4 of 101 part · 10 questions