MathOnline Red Seal Exam Preparation, built on official standards
MathThermal expansion and contractionHeatSee study access
Thermal expansion and contraction
α: linear expansion coefficient per °C · L₀: original length · ΔT: final minus initial temperature. Match coefficient to the temperature unit.
- ΔL = αL₀ΔT
- Final length = L₀ + ΔL
- 1Calculate the signed temperature change.
- 2Multiply by original length and coefficient, then convert the change to a practical unit.
For 10 m of steel with α=12×10⁻⁶/°C heated by 50 °C, ΔL=0.006 m=6 mm. Cooling by 50 °C gives −6 mm.
- Cold spring redistributes movement/stress; it does not eliminate the total thermal expansion.
- Celsius and Fahrenheit coefficients differ by 1.8.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A 20 m pipe has α=12×10⁻⁶/°C and warms by 80 °C. Find expansion.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ALPHA=Types ANS, the last answer