MathOnline Red Seal Exam Preparation, built on official standards
MathSensible heat, hydronic flow and capacityHeatSee study access
Sensible heat, hydronic flow and capacity
Q: heat energy · c: specific heat · ṁ: mass flow rate. 500 ≈ 8.33 lb/US gal×60 min/h×1 BTU/(lb·°F), for water near ordinary hydronic conditions.
- Q = mcΔT
- Heat rate = ṁcΔT
- Btuh ≈ 500 × US gpm × Δ°F (water)
- US gpm = Btuh / (500 × Δ°F)
- Δ°F = Btuh / (500 × US gpm)
- 1Distinguish a fixed mass being heated from a continuously flowing stream.
- 2Use the 500 shortcut only with water, US gallons per minute and °F temperature difference.
At 6 US gpm and a 20 °F drop, the approximate water heat rate is 500 × 6 × 20 = 60000 Btu/h. Reverse check: 60000 / (500 × 20) = 6 US gpm.
- 500 is a combined conversion factor, not the specific heat by itself.
- Energy in BTU alone cannot determine a flow rate without a time basis.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
How much heat raises 2 kg of water by 10 °C? Use c=4.18 kJ/(kg·°C) and neglect losses.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer