Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathBend allowance, mitres and cutting forceMachiningSee study access
All math

Bend allowance, mitres and cutting force

R: inside bend radius · t: thickness · K: stated neutral-axis factor · θ: bend angle in degrees. For N/mm² shear strength use mm and mm².

The formulas
  • Bend allowance = θπ/180 × (R + Kt)
  • Mitre angle = elbow angle / (2 × gores − 2)
  • Cutting force = cut length × thickness × shear strength
  • Mean diameter = OD − t = ID + t
How to do it
  1. 1Use the neutral-axis radius for bend length.
  2. 2For mitres count the specified gores or welds accurately.
  3. 3Keep the whole R+Kt sum inside the bend-angle multiplier.
Worked example

A 90° bend with R=10 mm, t=2 mm, K=0.4 has allowance=(π/2)(10+0.8)=16.965 mm.

The usual mistakes
  • Some source markup drops parentheses in bend allowance and presents two mean-diameter alternatives as a fraction. The dimensionally consistent forms are above.

Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade

Try one

A 90° bend has R=8 mm, t=2 mm, K=0.4. Find allowance to three decimals.

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • ππ, to more places than 3.14
  • sincostanFrom an angle to a ratio
  • ()Works the part in brackets first
  • ALPHA=Types ANS, the last answer

Calculator skill: pi and circles

Topic practice2 questions · 0 done