MathOnline Red Seal Exam Preparation, built on official standards
MathCutting speed, rpm and tooth-pass frequencyMachiningSee study access
Cutting speed, rpm and tooth-pass frequency
Vc: cutting speed · D: cutting diameter. The factor 1000 or 12 converts length units; Hz means cycles per second.
- rpm = 1000 × Vc(m/min) / (πD(mm))
- rpm = 12 × Vc(ft/min) / (πD(in))
- Surface speed = πD × rpm
- Tooth-pass frequency(Hz) = rpm × teeth / 60
- 1Match the speed and diameter units before selecting the formula.
- 2For frequency divide events per minute by 60.
At 100 m/min with a 20 mm cutter, rpm=1000×100/(π×20)=1591.5. A 10-tooth wheel at 600 rpm has 100 Hz tooth-pass frequency.
- rpm×teeth gives events per minute, not hertz.
- The shortcut 4 × surface feet/min ÷ diameter is approximate; 12/π≈3.82.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A 25 mm cutter requires 80 m/min cutting speed. Find rpm to the nearest whole number.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ππ, to more places than 3.14
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer