MathOnline Red Seal Exam Preparation, built on official standards
MathMaterial mass, hollow sections and loadsRiggingSee study access
Material mass, hollow sections and loads
Density examples: steel 7850 kg/m³ and concrete 2400 kg/m³ when specified. Mass(kg) is not force(N). Real rolled profiles use manufacturer mass tables.
- Mass = volume × density
- Hollow cylinder volume = π(D² − d²)L/4
- Thin-wall pipe volume ≈ π × mean diameter × thickness × length
- Solid sphere volume = πD³/6
- Angle-section area ≈ t(a+b−t) (sharp-corner model)
- 1Find material volume, subtracting voids.
- 2Apply the stated density and include all attachments in a total load estimate.
A steel plate measuring 2 m × 1 m × 0.01 m has a volume of 0.02 m³ and a mass of 157 kg at a density of 7850 kg/m³.
- A thin-wall approximation must use a suitable wall/diameter ratio.
- Multiplying angle leg width×height×thickness has the wrong dimensions for section area.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A steel plate is 1.5 m×0.8 m×10 mm. Use 7850 kg/m³. Find mass.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- x²Squares a number
- ππ, to more places than 3.14
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer