MathOnline Red Seal Exam Preparation, built on official standards
MathFeed rates and machining timeMachiningSee study access
Feed rates and machining time
fz: feed per tooth · z: number of teeth · f_rev: feed per revolution. Include approach/overtravel only when specified.
- Mill feed(mm/min) = fz × z × rpm
- Lathe feed(mm/min) = f_rev × rpm
- Time(min) = travel length / feed(mm/min)
- 1Calculate linear feed rate first.
- 2Divide total tool travel by that rate; convert minutes to seconds if needed.
At 0.05 mm/tooth with 4 teeth and 1000 rpm, feed = 200 mm/min. A 150 mm travel takes 0.75 min = 45 s.
- Feed per tooth and feed per revolution differ by the number of teeth.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A four-flute cutter runs at 1500 rpm with 0.04 mm/tooth feed. Find feed rate.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer