Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards

Powerline Technician math scenarios

MathQuestion 4 of 1070% to goContinue at question 4

10 questions

2 right · 1 wrong · 7 to do
  1. 1Conductor tension from the sagConductor tension = weight × span² ÷ (8 × sag) · Procedural and application
  2. 2Ruling span of a line sectionRuling span = average span + ⅔ (maximum span − average span) · Procedural and application
  3. 3Vertical conductor load on a tangent structureConductor weight = (span A + span B) ÷ 2 × weight per unit × SF · Critical thinking
  4. 4The factor from lb/ft to kg/mConversion · Knowledge and recall
  5. 5Phase-to-phase voltage on a 14.4 kV wye systemWye phase-to-phase voltage = phase-to-ground voltage × 1.73 · Procedural and application
  6. 6What ACSR on a conductor reel meansAcronym · Knowledge and recall
  7. 7Pull on a tugger line through three sheavesPull = (weight + 10% weight × number of sheaves) ÷ MA · Procedural and application
  8. 8Load on a 120/240 V pole transformerkVA = (V1 × I1 + V2 × I2) ÷ 1 000 · Procedural and application
  9. 9A puller gauge in daN read in poundsConversion · Procedural and application
  10. 10Setting depth of a 35 ft pole in metresConversion · Procedural and application

By question type

  • Procedural and application2 of 7 done
  • Critical thinking1 of 1 done
  • Knowledge and recall0 of 2 done

On the formula sheet

Part 1 · Question 4 of 101 part · 10 questions