Sign in
MathOnline Red Seal Exam Preparation, built on official standards
Insulator (Heat and Frost) math scenarios
MathQuestion 4 of 1070% to goContinue at question 4
10 questions
2 right · 1 wrong · 7 to do- 1Jacketing for an insulated pipe run
- 2Heel of a mitred elbow cover
- 3Jacketing for a tank with flat ends
- 4The formula for the surface of a cone
- 5Insulation for a rectangular duct
- 6Bags of pour-in insulation for a trench
- 7Outside diameter of NPS 6 pipe in millimetres
- 8Insulation density from lb/ft³ to kg/m³
- 9Insulating the sloped leg of an offset
- 10A pipe run of 120 ft in metres
Part 1
2 right · 1 wrong · 7 to do- 1Jacketing for an insulated pipe runSA = π d h · Procedural and application
- 2Heel of a mitred elbow coverMitred elbow ((CLR ± ½ OD) × 1.57) ÷ mitres · Procedural and application
- 3Jacketing for a tank with flat endsSA = π d h and SA = π r² · Critical thinking
- 4The formula for the surface of a coneSA = s π r · Knowledge and recall
- 5Insulation for a rectangular ductP = 2(L + W) · Procedural and application
- 6Bags of pour-in insulation for a trenchV = L × W × h · Critical thinking
- 7Outside diameter of NPS 6 pipe in millimetresConversion · Procedural and application
- 8Insulation density from lb/ft³ to kg/m³Conversion · Procedural and application
- 9Insulating the sloped leg of an offseta² + b² = c² · Procedural and application
- 10A pipe run of 120 ft in metresConversion · Procedural and application
By question type
- Procedural and application2 of 7 done
- Critical thinking1 of 2 done
- Knowledge and recall0 of 1 done