MathOnline Red Seal Exam Preparation, built on official standards
MathLevers, load sharing and reevingRiggingSee study access
Levers, load sharing and reeving
Distances are perpendicular moment arms. Simplified statics assumes a known centre of gravity and specified friction model.
- F₁d₁ = F₂d₂
- Ideal line pull = load / supporting rope parts
- Line pull = ideal pull × stated friction factor
- Support reaction = total load × distance from other support / support spacing
- 1Draw a free-body diagram showing forces and distances.
- 2Use moment balance and check that support reactions add to the total load.
A 10 kN load lies 2 m from support A and 3 m from support B. A carries 10 × 3/5 = 6 kN and B carries 4 kN, neglecting the beam's own weight.
- Count supporting parts of line, not sheaves alone.
- Use the specified friction factor rather than assuming all reeving is lossless.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A 20 kN load is supported by four ideal rope parts. Find line pull.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ALPHA=Types ANS, the last answer