Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathConductor sag, loading and ruling-span exercisesRiggingSee study access
All math

Conductor sag, loading and ruling-span exercises

w: load per horizontal length · L: span · s: sag. The parabolic approximation assumes level supports, uniform load and suitably small sag.

The formulas
  • Horizontal tension ≈ wL²/(8s)
  • Support conductor load = (spanA + spanB)/2 × unit weight × stated factor
  • Sheet ruling-span approximation = average + (2/3)(maximum − average)
How to do it
  1. 1Keep span and sag in the same length unit.
  2. 2Distinguish a stated classroom approximation from the engineering model required by the utility.
Worked example

For w = 10 N/m, L = 100 m and s = 2 m, horizontal tension ≈ 10 × 100² / (8 × 2) = 6250 N.

The usual mistakes
  • Do not apply an approximate ruling span in place of the specified design/sag-tension calculation.
  • Ice, wind, temperature and unequal support elevations change the load model.

Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade

Try one

Use T = wL²/(8s) with w = 8 N/m, L=80 m, s=2 m. Find horizontal tension.

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • x²Squares a number
  • ()Works the part in brackets first
  • ALPHA=Types ANS, the last answer

Calculator skill: squares and square roots

Topic practice2 questions · 0 done