MathOnline Red Seal Exam Preparation, built on official standards
MathVoltage and current dividersElectricalSee study access
Voltage and current dividers
For voltage division, output is across R₂ and the output is unloaded. For current division, I₁ flows through R₁.
- Vout = Vin × R₂ / (R₁ + R₂)
- I₁ = Iₜ × R₂ / (R₁ + R₂) (two parallel branches)
- 1Draw the output terminals or branch of interest.
- 2Use its own resistance for a voltage divider; the other branch resistance for a two-branch current divider.
A 10 V unloaded divider with R₁ = 3 kΩ and R₂ = 2 kΩ gives Vout = 10 × 2/5 = 4 V.
- A load connected across R₂ changes the effective lower resistance.
Pass Your Red Seal’s lessons and practice are independent study material. Source: OpenStax: resistors in series and parallel
Try one
An unloaded 24 V divider uses 2 kΩ above 1 kΩ. What is the voltage across 1 kΩ?
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer