Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathReactance, impedance and RC timingElectricalSee study access
All math

Reactance, impedance and RC timing

f: Hz · C: farads · L: henries · R/X/Z: ohms. AC relationships assume sinusoidal steady state; RC charging assumes an initially uncharged capacitor.

The formulas
  • Xc = 1/(2πfC)
  • Xl = 2πfL
  • Series impedance magnitude = √(R² + (Xl−Xc)²)
  • RC time constant τ = RC
  • ChargingVc = Vs(1−e−t/τ)
How to do it
  1. 1Convert μF to 10⁻⁶ F and mH to 10⁻³ H.
  2. 2Use vector impedance, not a direct resistance-plus-reactance sum.
Worked example

A 10 kΩ resistor and 100 μF capacitor have τ = 10000 × 0.0001 = 1 s. After one time constant, an initially uncharged capacitor reaches about 63.2% of the supply voltage.

The usual mistakes
  • Capacitive reactance falls as frequency rises; inductive reactance rises.
  • One time constant is not full charge.

Pass Your Red Seal’s lessons and practice are independent study material. Source: OpenStax: simple AC circuits (reactance), OpenStax: RC circuits

Try one

A 2 kΩ resistor and 500 μF capacitor form an RC network. Find τ.

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • x²Squares a number
  • 2ndFx²Takes a square root
  • ππ, to more places than 3.14
  • ()Works the part in brackets first

Calculator skill: squares and square roots

Topic practice2 questions · 0 done