Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathSensible heat, hydronic flow and capacityHeatSee study access
All math

Sensible heat, hydronic flow and capacity

Q: heat energy · c: specific heat · ṁ: mass flow rate. 500 ≈ 8.33 lb/US gal×60 min/h×1 BTU/(lb·°F), for water near ordinary hydronic conditions.

The formulas
  • Q = mcΔT
  • Heat rate = ṁcΔT
  • Btuh ≈ 500 × US gpm × Δ°F (water)
  • US gpm = Btuh / (500 × Δ°F)
  • Δ°F = Btuh / (500 × US gpm)
How to do it
  1. 1Distinguish a fixed mass being heated from a continuously flowing stream.
  2. 2Use the 500 shortcut only with water, US gallons per minute and °F temperature difference.
Worked example

At 6 US gpm and a 20 °F drop, the approximate water heat rate is 500 × 6 × 20 = 60000 Btu/h. Reverse check: 60000 / (500 × 20) = 6 US gpm.

The usual mistakes
  • 500 is a combined conversion factor, not the specific heat by itself.
  • Energy in BTU alone cannot determine a flow rate without a time basis.

Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade

Try one

How much heat raises 2 kg of water by 10 °C? Use c=4.18 kJ/(kg·°C) and neglect losses.

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • ()Works the part in brackets first
  • ALPHA=Types ANS, the last answer

Calculator skill: order of operations

Topic practice2 questions · 0 done