MathOnline Red Seal Exam Preparation, built on official standards
MathFan, pump and pulley ratiosMechanicalSee study access
Fan, pump and pulley ratios
N: rotational speed. Affinity relations assume same machine geometry, fluid density and comparable operating conditions.
- Q₂/Q₁ = N₂/N₁
- Head₂/Head₁ = (N₂/N₁)²
- Power₂/Power₁ ≈ (N₂/N₁)³
- D₁N₁ = D₂N₂ (belt drive, no slip)
- 1Calculate the new-to-old speed ratio.
- 2Apply the first, second or third power for flow, head or power.
A 10% speed increase gives a speed ratio of 1.10: flow × 1.10, head × 1.21 and power × 1.331. Under the stated affinity-law assumptions, a 2 kW fan would require about 2.662 kW.
- A 20% increase means multiplying by 1.20, not 0.20.
- Check motor/loading limits; the formulas are estimates, not permission to overspeed equipment.
Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade
Try one
A fan moves 1000 CFM at 1000 rpm. Estimate flow at 1200 rpm using the affinity relationship.
This topic
The lesson and a worked example
Practice questions in this topic12
Mixed practice
Every math topicKeys this topic uses
- x²Squares a number
- ()Works the part in brackets first
- ALPHA=Types ANS, the last answer