Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathArc lengths and developed patternsGeometrySee study access
All math

Arc lengths and developed patterns

θ: central angle in degrees · r: radius · d: diameter. The full circumference corresponds to 360°.

The formulas
  • Arc length = πrθ/180 = πdθ/360
  • Sector pattern angle = 360 × base radius / slant radius
  • Equivalent formpattern angle = 180 × base diameter / slant radius
How to do it
  1. 1Find the fraction of a full revolution.
  2. 2Multiply the circumference by that fraction. For a cone development, match sector arc to base circumference.
Worked example

A 90° arc at radius 300 mm is one quarter of 2π × 300, or approximately 471.24 mm. Dividing the arc length by the radius gives π/2 radians.

The usual mistakes
  • Some published arc labels are unclear: use central angle in degrees as the angular input.
  • Do not mix a base diameter with a formula expecting radius.

Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade

Try one

Find a 60° arc length on a circle of radius 2 m, to three decimals.

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • ππ, to more places than 3.14
  • sincostanFrom an angle to a ratio
  • ALPHA=Types ANS, the last answer

Calculator skill: pi and circles

Topic practice2 questions · 0 done