Pass Your Red Seal
MathOnline Red Seal Exam Preparation, built on official standards
MathGrade, roof rise and runGeometrySee study access
All math

Grade, roof rise and run

Use the same units for rise and run. Roof pitch is usually given as unit rise per 12 units of horizontal run: a 6:12 roof rises 6 for every 12 of run. Line length is the sloping length from plate to ridge centre; overhang, ridge thickness and birdsmouth allowances are added or subtracted afterwards.

The formulas
  • Grade (%) = rise/run × 100
  • Rise = run × unit rise/unit run
  • Symmetrical roof run = span/2
  • Rafter line length = √(run² + rise²)
  • Unit line length (per 12 of run) = √(12² + unit rise²)
How to do it
  1. 1Find the horizontal run first: for a symmetrical gable it is half the span.
  2. 2Rise = run × unit rise/unit run; grade = rise/run × 100.
  3. 3Rafter line length is the diagonal: √(run² + rise²), or run × unit line length/12. Then apply overhang and ridge allowances.
Worked example

A symmetrical 8 m span roof at 6:12 has a 4 m run and a rise of 4 × 6/12 = 2 m. Line length = √(4² + 2²) = √20 = 4.47 m. Check with the unit method: unit line length = √(12² + 6²) = 13.42, so 4 × 13.42/12 = 4.47 m.

The usual mistakes
  • A 2% grade is 0.02, not 2.
  • A sloping length is not the horizontal run.
  • Pitch 6:12 is a ratio, not a 6° or 12° angle; the angle is atan(6/12) ≈ 26.6°.

Pass Your Red Seal’s lessons and practice are independent study material. Source: Red Seal: formula resources by trade

Try one

A drain has a 2% fall over 8 m horizontal run. What is the fall?

This topic

The lesson and a worked example
Practice questions in this topic12
Mixed practiceEvery math topic

Mixed practice

Every math topic

Keys this topic uses

  • x²Squares a number
  • 2ndFx²Takes a square root
  • ()Works the part in brackets first
  • ALPHA=Types ANS, the last answer

Calculator skill: squares and square roots

Topic practice2 questions · 0 done