Cavitation and the vena contracta
Online Red Seal Exam Preparation, built on official standardsSPECIALIST STUDYCavitation and the vena contractaField practiceView study access
Specialist studyThe vena contracta is the contracted jet region after a restriction. Cavitation involves bubble collapse after pressure recovery; flashing leaves a vapour phase downstream.
THE FORMULAS
- Continuity: Av = constant
- Bernoulli: P + ρv²/2 + ρgz = constant (idealized streamline)
- Vapour forms where local absolute pressure falls below vapour pressure
HOW TO DO IT
- 1Compare local absolute pressure with the fluid’s vapour pressure at its actual temperature.
- 2Examine downstream recovery to distinguish collapse from persistent flashing.
- 3Relate the symptoms to the valve/pump application and manufacturer sizing guidance.
Worked example
If a liquid has a vapour pressure of 3 kPa absolute, a 2 kPa local minimum can create vapour. Recovery to 20 kPa permits collapse; remaining below 3 kPa supports flashing.
THE USUAL MISTAKES
- Upstream gauge pressure alone does not establish cavitation conditions.
- Real restrictions dissipate energy; the ideal Bernoulli equation is a learning model.
SOURCES AND FURTHER READING
Emerson: cavitation, flashing and valve sizingKSB: NPSH and cavitation criteriaYokogawa: orifice plate and tap arrangements
Pass Your Red Seal’s lessons and practice are independent study material. Manufacturer topics extend trade learning; they are not a claim about the content of an official exam.
TRY ONE · FREE
The vena contracta in a flowing fluid is best described as:
Topic practice10 practice questions
Topic practice
10 practice questions- Choose a short set or the full topic
- Review wrong answers and retry
- Resume in this browser tab
Connect the ideas
Topic practice
10 practice questions- Choose a short set or the full topic
- Review wrong answers and retry
- Resume in this browser tab